Synthesis and Characterization of Allyl Fatty Acid Derivatives as Reactive Coalescing Agents for Latexes

This work evaluated the use of allyl fatty acid esters derived from vegetable oil (palmitic acid, soybean and sunflower oils) as reactive coalescing agents in a waterborne latex system. Allyl fatty acid derivatives (AFAD) from vegetable oils were synthesized by two different processes. The synthesis was monitored by IR-spectroscopy and the final product characterized by FT-IR, GC–MS, ¹H and ¹³C NMR. The presence of conjugated double bonds in the aliphatic chain was confirmed, which is a determinant for the proposed autoxidative latexes drying mechanism. Each of the AFAD were subsequently added to a standard acrylic emulsion, in order to study its potential as reactive coalescing agent. The minimum film-forming temperature (MFT), glass transition temperature (T _g), drying time and rubbing resistance to solvents were evaluated. The results showed that, when added to water-borne acrylic resins, an AFAD acts as a non-volatile plasticizer capable of autoxidative crosslinking with itself.     

Production of fungal lipases using wheat bran and soybean bran and incorporation of sugarcane bagasse as a co-substrate in solid-state fermentation

Fungal strains were screened for lipase producing activities and 10 strains were classified as good producers. Aspergillus sp., Fusarium sp., and Penicillium sp. exhibited the highest activities when fermented in wheat bran (WB) and soybean bran (SB). No fungal growth was observed using sugarcane bagasse (CB). An experimental design was applied to incorporate CB into the fermentation process for lipase production by Aspergillus sp. and Penicillium sp., and to evaluate the best moisture content for the substrate. Strains studied achieved maximum lipase activities with 25% CB combined with 75% WB or SB at 40% moisture content. The highest lipase activities were observed for WB and SB, and for SB combined with CB using Aspergillus sp. Fermentation of 96 h was the optimum period for enzyme production.     

Determination of alcohols and volatile organic acids in anaerobic bioreactors for H2 production by near infrared spectroscopy

In recent years, near infrared (NIR) spectroscopy has been investigated as a tool for monitoring anaerobic digesters, but several adversities in its application have been reported. This study proposes the application of NIR for the determination of alcohols and volatile organic acids from H₂ production bioreactors and evaluates different approaches to optimize the prediction models. Partial least squad (PLS) models were developed using samples from anaerobic batch reactors fed with crude glycerol for wastewater treatment. The analytes predicted were: methanol, ethanol, 1-butanol, acetic, propanoic, butyric, isocaproic and total volatile organic acids (VFA). The optimization of the predictive capacity of the models was achieved through the orthogonal signal correction (OSC) preprocessing and the selection of variables performed by the genetic algorithm (GA). The application of the proposed models were based on the following figures of merit: accuracy, precision, linearity, limits of detection and quantitation, measurement interval, sensitivity, selectivity, signal-to-noise ratio and bias. Despite the low selectivity (maximum of 0.12%), the models presented high sensitivity [γ^?1 = 0.19 (mg L^?1)^?1], low LOQ (1 mg L^?1) and correlation between reference and predicted values (r) at least 0.93, except for propanoic acid (r_pred = 0.85). The F-test revealed that the selection of variables by GA significantly improved the accuracy and linearity of the prediction models for methanol, acetic acid, isocaproic acid and VFA. NIR spectroscopy has proved to be a powerful tool for monitoring H₂ production bioreactors since provides fast, low cost and multicomponent information.     

Oil‐spill cleanup: The influence of acetylated curaua fibers on the oil‐removal capability of magnetic composites

A magnetic resin based on cardanol, furfural, and curaua fibers was prepared and characterized. The material could be used in oil‐spill cleanup processes, because of its aromatic/aliphatic balance. The resin was prepared through bulk polycondensation of cardanol and furfural in the presence of curaua fibers and maghemite nanoparticles. Hydrophobicity of the curaua fibers was improved by acetylation, increasing the oil‐absorbing capability of the composites. The obtained magnetic composites were studied by Fourier‐transform infrared spectroscopy, X‐ray diffraction, and thermogravimetric analysis. Degree of cure, magnetic force, and oil‐removal capability tests were also performed. The results show that the composites possess an elevated cure degree in addition to a considerable magnetic force. The materials exhibit a good oil removal capability in the presence of a magnetic field, which is improved by the use of acetylated curaua. In the best case, the composite filled with maghemite and curaua can remove 12 parts of oil from water. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41732.     

Stresses Analysis on a Rail Part

The EFVM （Vitoria Minas Railroad） is one of the main railways in Brazil. It transports freight trains of ore, 220 wagons each. These wagons have 2 boogies of 2 axles each and 32 metric tons on metre gauge. Elastic strains were measured on a special part of this railway due to these trains. The main load to evaluate stresses and strains was a G 16 Locomotive, a C-C kind from Vale, a Brazilian Company. The measurements were obtained by dynamic deflectometer installed on a main line of this railway, near Ipatinga, a city from Minas Gerais, one of Brazil states. This track was equipped to obtain stresses under an equal repeated static load A simulation of the stresses was made under critical strain by Ferrovia 1.0 software. It was also made an evaluation of unequal results from neighbor sleepers taking in comparison two equipped parts of this railway, one with compacted ballast and no compaction to the other. The results were strain limited, avoiding breakage or damage to the studied rails. This work analyses these measurements focusing on the improvement of track quality.     

Burial grounds’ impact on groundwater and public health: an overview

The most common practice for disposal of dead bodies is inhumation in soil, which favours interactions with the surrounding environment and returns nutrients to the life cycle. However, when the burial ground is located where hydrogeological, geological and climatic conditions are not favourable to the process, contamination of soils and groundwater may occur, and decomposition may be inhibited, leading to social, economic and political problems. The most critical parameters when assessing the pollution potential of a burial ground are inhumation depth, geological formation, depth of the water table, density of inhumations, soil type and climate. Considering that, this paper presents an overview of the potential threat that cemeteries can pose, analysing and discussing the influence of the main variables causing environmental impacts and public health risks.     

Developing eco-friendly methods for purification of compounds derived from hydrogenated cardanol

The present work made a comparative study between two purification methods, column chromatography and recrystallization, for compounds derived from cardanol, a by-product of the cashew industry (Anacardium occidentale L.). The compounds were successfully synthesized and characterized, focusing our attention to results obtained in terms of yield, purity, generation of solid waste and amount of solvent used in each purification process. For all the synthesized compounds, the amount of solvent used was greatly reduced in the recrystallization process, with purities above 80%, when compared to chromatographic column, which still demands high amounts of eluent.     

Effect of P2O5 on the Nonisothermal Sinter‐Crystallization Process of a Lithium Aluminum Silicate Glass

Dense (~98.5%), lithium aluminum silicate glass‐ceramics were obtained via the sinter‐crystallization of glass particle compacts at relatively low temperatures, that is, 790–875°C. The effect of P₂O₅ on the glass‐ceramics' sinter‐crystallization behavior was evaluated. We found that P₂O₅ does not modify the surface crystallization mechanism but instead delays the crystallization kinetics, which facilitates viscous flow sintering. Our glass‐ceramics had virgilite (Li_xAl_xSi_3‐xO₆; 0.5 < x < 1), a crystal size <1 μm, and a linear thermal expansion coefficient of 2.1 × 10^?6°C^?1 in the temperature range 40–500°C. The overall heat treatment to obtain these GCs was quite short, at ~25 min.     

Improved fallow: growth and nitrogen accumulation of five native tree species in Brazil

Nitrogen (N) is the most important yield-limiting factor in agricultural systems, however, N application can lead to emissions and environmental problems such as global warming (N₂O) and groundwater contamination (NO₃ ^?). This study analyses the N balance, nitrogen-use efficiency, and N loss potential of conventional farming systems (arable farming, improved arable farming, and agroforestry) and organic farming systems (mixed farming, arable farming, and agroforestry) based on long-term field experiments in southern Germany. The effects of the conversion of farm structure and N management are identified. The conventional farming systems in this study were high N-input and high N-output systems. The conventional arable farming system had the lowest nitrogen-use efficiency and the highest N surplus. An optimised N management and the use of high-yielding crop varieties improved its nitrogen-use efficiency. The establishment of conventional agroforestry resulted in the reduction of N input, N output and N surplus, while maintaining high yields. The organic mixed farming system is characterised by a relatively high N input and N output, the accumulation of soil organic nitrogen, the highest nitrogen-use efficiency, and the lowest N surplus of all analysed systems. These good results can be attributed to the intensive farm N cycle between soil–plant–animal. The shift from organic mixed farming to organic arable farming system extensified the N cycle, reduced N input, crop yield and N output. The change from organic arable farming to organic agroforestry reduced the N input, increased the biomass yield, and remained the N surplus within an optimal range.