Development of color in fats stabilized with amino-hexose-reductones

Summary Amino reductones derived from hexoses were evaluated for color development in heated, oxidizing fat systems. Browning was observed to some extent with all the amino-hexose-reductones. The brown color frequently faded upon long heating of the oils. The density of color increased with reductone concentration and varied markedly among the different amino reductones. Morpholino-hexose-reductone could be used in lard and vegetable oils at concentrations up to 0.01% without introducing visually detectable amounts of color. Heating soybean oil solutions of the amino reductones at 100°C. under vacuum slowly destroyed the reductone but did not cause development of color. Air or oxygen was required for color production. Addition of citric acid along with the reductone reduced the amount of color developed. Reductones in fat systems show similarities in browning to reductones in aqueous systems. New considerations for the mechanism of antioxidation by polyphenols and reductones in oils are presented. Presented at the spring meeting, American Oil Chemists’ Society. New Orleans, La., April 28-May 1, 1957.     

Oxidation and quality of soybean oil: A preliminary study of the anisidine test

The anisidine test, a measure of secondary oxidation products in glyceride oils, was applied to a number of soybean salad oils processed from sound and damaged soybeans. A highly significant correlation (−0.68) was found between the anisidine values of salad oils from sound soybeans and their flavor scores. Multiple correlations between flavor scores, anisidine, and peroxide values yielded a correlation of 0.81 and provided a method for predicting the initial flavor scores of sound soybean salad oils. Similar data for oils from damaged beans gave a highly significant, but lower, correlation (−0.65). Comparative studies indicated that sound crude oils usually contain lower levels of oxidation products than damaged crude. Oxidation in both sound and damaged crudes increased roughly in proportion to iron content. Reproducibility of the test and the effects of hydrogenation, accelerated storage, and fluorescent light on anisidine values were studied. Analysis of damaged oils before and after deodorization showed that little, if any, reduction of anisidine value occurred. Deodorization of sound oils, however, lowered anisidine values. In comparison with damaged oils, the anisidine values of sound oils were lower at comparable stages of processing. The poor quality of damaged soybean oil was substantiated by organoleptic evaluations. Flavor scores of oils given special processing treatments increased as anisidine values decreased.     

Bubble Formation at a Rotating Cylindrical Surface in Cross‐Flowing Liquid

A novel method of gas sparging from a rotating cylinder is proposed, which prevents against formation of large attached gas cavities in cross‐flowing liquids including those flowing downwards. Experimental and theoretical results regarding critical rotation speed necessary to remove the attached cavity, bubble formation process and size distribution of the produced bubbles in a low viscosity system (air‐water) are presented in this study.     

Biochemical activities during lipid accumulation inCandida curvata

Intracellular and extracellular concentrations of citrate and the specific activities of ten different enzymes in Candida curvata D were examined in relation to lipid biosynthesis in batch and continuous culture. Citrate was found to accumulate prior to lipid production and declined markedly as lipid accumulated in batch culture. The cells excreted citrate as the culture became nitrogen-limiting after 30 hr of growth, but little more was expelled after 40 hr when lipid accumulation was more marked. In continuous culture, only low levels of citrate were detected at the lower dilution rates and citrate was completely absent from both the cells and medium above a dilution rate of 0.1/hr. The activity of malic enzyme, malate dehydrogenase and ATP:citrate lyase increased in batch culture on lipid accumulated and, in continuous culture, both malic enzyme and ATP:citrate lyase varied in parallel with the specific rate of lipid synthesis which increased with increasing dilution rate. Activity of malate dehydrogenase, citrate synthase and glucose-6-phosphate dehydrogenase decreased with increasing dilution rate. The regulatory significance of these enzymes in lipid accumulation by C. curvata is discussed.     

Direct Ink-Jet Printing of Vertical Walls

Direct jet printing can assemble ceramic powder into a three dimensional shape by firing droplets of ink through a nozzle to build a multiple layered structure. As with stereolithography and selective laser sintering, the surface texture is expected to witness the layered assembly. The ability to create vertical walls by direct ink-jet printing was explored using a test piece based on a maze. The structure and topography are discussed in terms of droplet spreading and drying.     

Mode I Fracture Resistance of a Laminated Fiber-Reinforced Ceramic

The mode I fracture resistance of a ceramic matrix composite has been measured. Simultaneous observations have revealed that the resistance is dominated by frictional dissipation upon the pullout of fibers that fracture in the crack wake off the crack plane. Numerical and analytical crack growth simulations have been compared with the experimental results. One important feature in this comparison concerns the occurrence of large-scale bridging. With these effects taken into account, the simulations and the experiments are found to be in good correspondence for acceptable magnitudes of the interface sliding stress.     

A preliminary investigation of some anodes for use in fluidized-bed electrodeposition of metals

The development of fluidized-bed electrowinning for copper and other metals appears to be impeded by the high electrical energy consumption associated with the anodes used in such electrowinning. This paper describes preliminary work aimed at seeking anodes which consume less energy and are suitable for scale-up. Using laboratory-scale cells in which copper was electrowon from strong (25 g dm^–3 Cu), acidified (100 g dm^–3 H₂SO₄) sulphate solutions on to fluidized cathodes, the following anodes were tested: fluidized-bed anodes of catalyst-coated titanium particles, packed-bed anodes of lead shot and graphite, single and double layers of catalyst-coated titanium mesh, and cloth-covered anodes placed directly in the fluidized cathode. In addition, the possibility of using alternative anode reactions, namely oxidation of sulphur dioxide, ferrous ions or cuprous ions, as well as fluidized-bed electrowinning from a cuprous-ion catholyte, were examined. Except for the fluidized anode and the lead packed-bed anode, all the above systems yielded energy savings. The investigation was not sufficiently detailed to define which of the above was best, although, at 2.0 kW h kg^–1 Cu, electrowinning from cuprous solutions with cuprous oxidation on a graphite packed-bed anode offered an energy consumption better than that of the conventional electrowinning plants.     

Fiber Coating Concepts for Brittle-Matrix Composites

The current interest in tough, high-temperature materials has motivated fiber coating development for brittle-matrix composites with brittle reinforcements. Such coatings are needed for controlled interface debonding and frictional sliding. The system investigated in this study was sapphire fiber-reinforced alumina. This system is thermochemically stable for severe use conditions, exhibits little thermal expansion mismatch, and utilizes the excellent strength and creep resistance of sapphire reinforcements. Porous oxide and refractory metal coatings which satisfy requirements for toughness improvement in these composites were identified by employing a variety of newly developed mechanical testing techniques for determining the interfacial fracture energies and sliding resistances.     

Zn-Al-CO_3水滑石晶粒尺寸控制与光屏蔽作用研究

在旋转液膜反应器中制备成核浆液 ,通过控制晶化温度制备了不同粒径且晶体结构完整的Zn Al CO3水滑石 (LDHs)。将不同粒径的Zn Al CO3LDHs配成质量分数为 0 0 2 %的水分散液 ,测定在紫外 -可见光范围的透过率 ,结果发现 ,随晶化温度的升高 ,LDHs粒径增大 ,样品对紫外及可见光的阻隔作用增强 ;Zn Al CO3LDHs在不同波长下的吸光度与晶体粒子在a轴和c轴方向的尺寸呈线性关系。由外推法求得了Zn Al CO3LDHs对各波长紫外 -可见光产生屏蔽作用的晶粒尺寸阈值。对波长分别为 2 90、3 2 0、40 0、60 0和 80 0nm光波能够产生屏蔽作用的Zn Al CO3LDHs ,其粒子尺寸在a轴方向需分别大于 3 2 92、3 3 77、3 4 77、3 5 5 6、3 5 79nm ;在c轴方向需分别大于 9 73、12 79、16 47、19 3 5、2 0 2 2nm。     

Prediction of Experimental Methanol Decomposition Rates on Platinum from First Principles

A microkinetic model for methanol decomposition on platinum is presented. The model incorporates competitive decomposition pathways, beginning with both O–H and C–H bond scission in methanol, and uses results from density functional theory (DFT) calculations [Greeley and Mavrikakis, J. Am. Chem. Soc. 124 (2002) 7193, Greeley and Mavrikakis, J. Am. Chem. Soc. 126 (2004) 3910]. Results from reaction kinetics experiments show that the rate of H₂ production increases with increasing temperature and methanol concentration in the feed and is only nominally affected by the presence of CO or H₂ with methanol. The model, based on the values of binding energies, pre-exponential factors and activation energy barriers derived from first principles calculations, accurately predicts experimental reaction rates and orders. The model also gives insight into the most favorable reaction pathway, the rate-limiting step, the apparent activation energy, coverages, and the effects of pressure. It is found that the pathway beginning with the C–H bond scission (CH₃OH→H₂COH→HCOH→CO) is dominant compared with the path beginning with O–H bond scission. The cleavage of the first C–H bond in methanol is the rate-controlling step. The surface is highly poisoned by CO, whereas COH appears to be a spectator species.