Microstructural and Hardness Studies of Cu-10wt.%Sn Alloy Under Different Aging Conditions

Microstructure of Cu-10wt.%Sn alloy, prepared by powder metallurgy technique and sintered at 900 °C for 120 min in hydrogen atmosphere, was studied by optical microscopy and XRD technique as a function of aging time. Isothermal aging of the alloy specimens was performed at 250 °C for a period of 30, 60, 120, 300, and 1440 min after solution treatment at 500 °C for 60 min. Rockwell hardness of aged specimens was also measured at room temperature as a function of aging time. It was observed that microstructure of the as-sintered specimens consists of the grains of alpha Cu-Sn solid solution. Moreover, solution treatment of the alloy specimens followed by quenching in water increased the hardness of the as-sintered alloy specimens from 35.5 to 59.8 HRF due to the residual stresses generated by fast cooling. Aging at 250 °C for 30, 60, and 120 min was found to cause a decrease in hardness from 59.8 to 45.1 HRF, whereas the specimens aged for 300 and 1440 min show an increase in hardness from 45.1 to 75.7 HRF. The values of porosity calculated from XRD patterns of the alloy specimens referred to show that porosity varies with aging time in a manner opposite to that of hardness, e.g., porosity is maximum for 120 min aging time where hardness is minimum.     

Determinants of rural household food security: a comparative analysis of African and Asian studies

This paper reviews the determinants of rural household food security in Africa and Asia where more than 88% of the world's undernourished people live. A conceptual model is proposed on the basis of the three widely known components of food security: food availability, accessibility and utilisation. This model is used to select a total of 40 peer‐reviewed studies carried out over the last decade (20 each from Africa and Asia). A meta‐analysis technique is then used to identify which determinants of food security have been highlighted and how well the causality is demonstrated. Food availability is the most studied component in both regions, followed by food accessibility, while food utilisation is the most neglected component in these studies. © 2013 Society of Chemical Industry     

Effect of cobalt-60 γ radiation on the physical and chemical properties of poly(ethylene terephthalate) polymer

The structural, optical, and morphological properties of Co⁶⁰ γ irradiation on poly(ethylene terephthalate) polymer samples were studied with X-ray diffraction (XRD), ultraviolet–visible spectroscopy, scanning electron microscopy (SEM), and Raman spectroscopy. The diffraction pattern of virgin sample showed that the polymer was semicrystalline in nature. However, because of irradiation, the crystallinity decreased up to a dose level of 110 kGy and increased up to 300 kGy. The crystallite size, strain, and dislocation were calculated from the XRD data, and the crystallite size decreased from 291.07 to 346.90 Å. The absorption edge shifted from 315 to 330 nm, and the band gap of the samples decreased from 3.79 to 3.66 eV. The SEM micrographs showed radial bulging along with inhomogeneous liner exfoliation, and also, a rocky shape pattern with different sizes was observed. A significant change was found in the Raman spectra of the γ-irradiated polymer at the highest dose. The results of the structural, optical, and morphological studies show recovery characteristics at the highest dose level of 300 kGy. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Measurements of crosspolarisation and gain reduction due to dust on a microwave reflector antenna

9 GHz measurements of effects of dust accretion on the surface of a reflector antenna confirm an earlier prediction of a larger gain reduction when the dust layer covers half the area. Crosspolarisation levels were higher than expected theoretically. Deposits on the primary feed also cause high crosspolarisation.     

Back-gated buried oxide MOSFETs in a high-voltage bipolartechnology for bonded oxide/SOI interface characterization

A novel back-gated P-MOSFET structure is fabricated in a high-voltage complementary bipolar technology using BESOI (bonded etch back SOI) substrates. The P+ buried layer regions, used for the PNP BJT are used as the source and drain regions, the N- epi as the channel region, the silicon handle wafer as the gate, and the BOX (buried oxide) as the gate oxide. The P-MOSFET was used to characterize the interface between the BOX and the SOI. The devices exhibit high sub-threshold slope which is attributed to a high interface state density of about 2×10¹²/cm² at the bonding interface. Bias-temperature stress measurements show an effective mobile charge density of 4×10¹⁰/cm² in the buried oxide     

Clozapine for the control of hemiballismus

Pharmacological agents used for the control of ballistic movements include chloral hydrate, barbiturates, paraldehyde, bromides, phenothiazines, progabide, haloperidol, pimozide, reserpine, tetrabenazine, sodium valproate, and dimethylaminoethanol. These agents are believed to act by different mechanisms, including modification of dopaminergic, GABAergic, or cholinergic mechanisms. We report a case where, after failure of haloperidol, phenobarbital, and pimozide, the hemiballistic movements were controlled with clozapine.     

The well-posedness for fractional nonlinear Schrödinger equations

In this paper we apply the tools of harmonic analysis to study the Cauchy problem for time fractional Schrödinger equations. The existence and a sharp decay estimate for solutions of the given problem in two different spaces are addressed. Some fundamental properties of operators appearing in the solution of the problem are also discussed.     

Conflict resolution using game theory and rough sets

Conflicts occur naturally in the real world at all levels of society, individually, in groups or society as a whole. Almost all the existing conflict resolution models are unilateral in their decision‐making process. They do not consider the actions of the involved parties simultaneously. Therefore, in this paper, we aim to design a novel conflict resolution model based on game‐theoretic rough sets by constructing a game between all the concerned parties (players), computing the payoff of different strategies and classifying them following equilibrium rules. The proposed model yields more realistic and accurate results as it explores all possibilities and is flexible in determining different threshold values relative to the complexities of real‐life problems. Three real‐life conflict situations are solved with the proposed model, and a comprehensive analysis is done to validate the effectiveness of the proposed approach.     

Combining pre-retrieval query quality predictors using genetic programming

Predicting the effectiveness of queries plays an important role in information retrieval. In recent years, a number of methods are proposed for this task, however, there has been little work done on combining multiple predictors. Previous studies on combining multiple predictors rely on non-backtracking based machine learning methods. These studies show minor improvement over single predictors due to the limitation of non-backtracking. This paper discusses work on using machine learning to automatically generate an effective predictors’ combination for query performance prediction. This task is referred to as—learning to predict for query performance prediction in the field. In this paper, a learning method, PredGP, is presented to address this task. PredGP employs genetic programming to learn a predictor by combining various pre-retrieval predictors. The proposed method is evaluated using the TREC Chemical Prior-Art Retrieval Task dataset and found to be significantly better than single predictors.