Bulk surface photografting process and its applications. I. Reactions and kinetics

A bulk surface photografting process which is conducted in the interface between two polymer films was designed and investigated. The bulk surface photografting is a highly efficient process. With this method, the surface of hydrophobic polymers can be made hydrophilic in less than 2 s and a grafted layer 5 μm thick can be obtained in 30 s. The kinetic investigation shows that the bulk surface photografting polymerization involves a four-step reaction process: induction period, surface initiation, successive polymerization, involves a four-step reaction process: induction period, surface initiation, successive polymerization, and solid-phase crosslinking. The photoreduction of benzophenone (BP) takes place in the interlayer between the LDPE films and is a three-stage process: surface photoreduction, secondary photoreduction, and solid-state photoreduction. With regard to the photoreduction of the initiator caused by hydrogen abstraction, the kinetic studies show that the photoreduction rate has a first-order dependence on the BP concentration. The activation energy of the hydrogen abstraction reaction is about 28.5 KJ (6.8 kcal)/mol. With regard to the photografting polymerization reaction, the reaction order of the rate Rp with respect to the monomer is unity and 0.89 with respect to BP. This means that the termination reaction takes place mainly by combination of polymer chain free radicals and semipinacol free radicals from BP. The activation energy of the overall polymerization reaction is around 8.8 kJ (2.1 kcal)/mol. © 1996 John Wiley & Sons, Inc.     

Modification of E-glass fiber surfaces with polyacrylic acid polymers from an aqueous solution

The research reported in the article focuses on modifying glass fiber surfaces with polyacrylic acid (PAA) compounds. E-glass fibers were treated with aqueous polyacrylic acid solution. Polyacrylic acid exchanges its protons with the ions present in the glass surface. Hydrolyzed metal cations may form salt complexes with the dissociated polyacrylic acid. Angular dependent electron spectroscopy for chemical analysis (ESCA) demonstrated that the atomic concentrations of aluminum and calcium in the glass fiber surface were constant throughout the analyzed interval. The cation exchange property of glass fiber was studied using direct current plasma (DCP), which showed that both calcium and aluminum ions were extracted by low concentration polycrylic acid solutions. ESCA studies of were extracted by low concentrationb polyacrylic acid solutions. ESCA studies of the PAA-treated glass fiber showed that the amount of PAA of the glass surface increases with increased acid concentration. A broadened and shifted ESCA peak of the carbon (0 CO) indicates the formation of salt complexes between the polyacrylic acid and metal ions on the glass surface. Polyacrylie acid was modified by an esterification reaction with glycidyl acrylate (GA) in aqueous solution in order to insert organofuctional groups into the PAA chain.     

On the improvement of film cooling performance using tree-shaped network holes: A comparative study

Abstract

For modern high-efficiency gas turbines, film cooling is an essential method to protect the turbine blade from the hot gas, and the issue about how to improve the film cooling performance has attracted much attention. This study presents a new design concept used for film cooling in gas turbine to improve the overall cooling effectiveness and better decrease the metal temperature of the blade at the same time. A tree-shaped film cooling structure is considered. To validate the superiority of the proposed structure, a series of numerical simulation cases are conducted at three typical blowing ratios (i.e. 0.5, 0.764, and 0.9). The first case is a film cooling channel with a single film hole with a diameter of 5?mm and it is inclined by α?=?45° relative to the mainstream direction and the other three cases are tree-shaped structures with one level, two levels and three levels of bifurcations. Moreover, the same boundary conditions and turbulence model (realizable k–ε) are adopted, and three-dimensional numerical simulations are used for all cases. The computed results show that the higher the blowing ratio, the better is the overall effectiveness downstream the film holes of the tree-shaped structures, whereas the opposite is valid for the case with a single film hole. Additionally, the overall effectiveness of the tree-shaped structures is improved more than 50% compared with Case 1 with a single film hole, and the results also demonstrate that the more levels of the structure, the lower the metal temperatures will be. Therefore, it is indicated that this research will make a contribution to a higher performance gas turbine.     

CeO2−CoO Phase Diagram

Phase equilibria in the CeO₂−CoO system at temperatures above 1500°C were investigated. The microstructures and the phase compositions of the DTA (differential thermal analysis) samples and the quenched solid pellets were analyzed using SEM (scanning electron microscope), EDX (energy dispersive X-ray), and WDX (wavelength dispersive X-ray). A eutectic reaction was found at 1645 ± 5°C. The eutectic point was calculated to be at 82 ± 1.5 mol% CoO. The eutectic phases were the CeO₂-rich phase (containing <5 mol% CoO) and the CoO-rich phase (containing ∼0.5 mol% CeO₂). At 1580°C, the solubility of CoO in CeO₂ was ∼3 mol%.     

Wind energy potential in southern Sweden-Example of planning methodology

This study presents a planning model for Swedish activities in the field of wind power. Models and results of calculations of the land-based wind energy potential with the Wind Atlas Analysis and Application Programme, WA^sP, are described and analysed in a geographical information systems (GIS) called the ArcView^® GIS system. One county in southern Sweden was chosen as a case study to present the methods used. The results from that case study indicate a great wind energy potential but there are nevertheless many factors limiting that potential. The study calls for a further development of planning tools in the field. Important areas for the future are the development of knowledge in market issues, wind power technology, environmental issues, and public opinion on constructing wind turbines.     

Synthesis and experimental study of novel double perovskite Ba2NixCo2−xO6 as promising oxygen carrier materials for CO2 capture application

Novel oxygen-deficient double-perovskite type oxide Ba₂Ni_xCo_2−xO₆ was applied to produce O₂/CO₂ mixed stream gas for oxyfuel combustion application. A series of different Co concentration substituted Ba₂Ni_xCo_2−xO₆ was synthesized by an EDTA-citrate sol-gel combustion method. The oxygen carriers, Ba₂Ni_0.25Co_1.75O_6, Ba₂Ni_0.45Co_1.55O₆, Ba₂Ni_0.65Co_1.35O₆ and Ba₂Ni_0.85Co_1.15O₆ were ccharacterized by scanning electron microscopy and cyclic oxygen adsorption/desorption experiments. The results showed that the capacity of provided O₂ was improved by the partial substitution of Ni by Co. In addition, the synthesized perovskites exhibit good regeneration ability. The optimal degree of Co substitution was x = 0.25 for Ba₂Ni_xCo_2−xO₆ with consideration of oxygen desorption ability. Therefore, Ba₂Ni_0.25Co_1.75O₆ was selected to examine the influence of the operating parameters on the oxygen release performance. It was found that the desorption temperature and CO₂ partial pressure are the two main operating parameters for the oxygen desorption performance. Further, the proposed novel double perovskite Ba₂Ni_0.25Co_1.75O₆ provided excellent performance, the O₂ production of Ba₂Ni_0.25Co_1.75O₆ can still reach 120 mg/g after 10 cycles.     

Turbulent heat transfer characteristics of supercritical n‐decane in a vertical tube under various operating pressures

To explore the effect of the operating pressure on the flow and thermal characteristics in a vertical tube with supercritical n‐decane, the inner wall temperature along the streamwise direction, the applicability of empirical correlations and buoyancy criteria are studied firstly. The mechanisms in views of density distribution, velocity field, turbulence intensity, the thickness of the thermal boundary layer, and secondary flow are then analyzed. It is observed that the buoyancy is helpful for the phenomenon of heat transfer deterioration at lower operating pressures but higher operating pressures can diminish this tendency. According to this reason, the empirical correlation proposed by Bae and Kim is suitable for the higher operating pressures but cannot well predict the occurrence of heat transfer deterioration. However, it can be evaluated by the buoyancy criterion Gr/Re² = 0.01 qualitatively. The decrease of turbulence intensity, the thickened thermal boundary layer, and secondary flow generation make contributions to the heat transfer deterioration in particular. Similarly, this situation can be diminished and even removed by the higher operating pressures.     

Early identification of reading difficulties using heterogeneous developmental trajectories.

Serious conceptual and procedural problems associated with current diagnostic methods call for alternative approaches to assessing and diagnosing students with reading problems. This study presents a new analytic model to improve the classification and prediction of children's reading development. Growth mixture modeling was used to identify the presence of 10 different heterogeneous developmental patterns. In all, 411 children in kindergarten through Grade 2 from 3 elementary schools in Texas were administered measures of phonological awareness, word recognition, and rapid naming skills 4 times a year. The mean ages were 5.8 years (SD = 0.35) for the kindergartners, 6.9 years (SD = 0.39) for Grade 1, and 8.0 years (SD = 0.43) for Grade 2; the percentage of boys was 50%. The results indicate that precursor reading skills such as phonological awareness and rapid naming are highly predictive of word reading (word recognition) and that developmental profiles formed in kindergarten are directly associated with development in Grades 1 and 2. Students identified as having reading-related difficulties in kindergarten exhibited slower development of word recognition skills in subsequent years of the study. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Graft copolymerization onto starch. II. Grafting of acrylonitrile to granular native potato starch by manganic pyrophosphate initiation. Effect of reaction conditions on grafting parameters

The effect of reaction conditions on the composition of native potato starch–polyacrylonitrile graft copolymers initiated by manganic pyrophosphate onto starch slurries at 30°C has been examined. In general, when the Mn³⁺ ion concentration was increased from 0.15 × 10^?3M to 3.0 × 10^?3M (other conditions kept constant), an increase in conversion of monomer to polymer and % add-on was observed, whereas frequency of grafts (anhydroglucose units, AGU, per grafted chain) decreased. Also, the average molecular weights of grafts showed a decrease from 2.2 × 10⁵ to 1.5 × 10⁵. Increasing the concentration ratio of starch to monomer during polymerization by a factor of 3 produced an increase in the conversion of monomer to polymer, whereas an increase in frequency of grafts (AGU/chain) was obtained. Values of % add-on and average molecular weights of the grafts showed, however, a decreasing tendency. It was observed that grafting onto starch took place readily even at acid additions as low as 10 × 10^?3M H₂SO₄ (pH ?1.8). Selective solvent extraction of homopolymer and extremely low conversions of monomer to polymer (0.1%–1.5%) in duplicate runs without addition of starch indicated that grafting efficiencies were high in all cases. An attempt has been made to interpret the results in terms of variations in factors such as initial ratio of (Mn³⁺)/(AGU), termination rate of acrylonitrile chain radicals by oxidation by Mn³⁺ ions, oxidation rate of radicals formed on anhydroglucose units by Mn³⁺ ions, and physical factors such as diffusion rate of Mn³⁺ ions through the polyacrylonitrile-grafted starch granules for terminating the radicals.