Airborne and laboratory studies of an IAGOS instrumentation package containing a modified CAPS particle extinction monitor

An evaluation of the operation and performance of a Cavity Attenuated Phase-Shift Particle Extinction Monitor (CAPS PM_ex) was performed for use on board commercial aircraft as part of the research infrastructure IAGOS (In-service Aircraft for a Global Observing System, www.iagos.org). After extensive laboratory testing, a new flow system, using mass flow controllers, was installed to maintain constant purge and sample flows under low and varying pressure conditions. The instrument was then tested for pressures as low as 200 hPa and evaluated against particle-free compressed air and CO₂. Extinction coefficients for the studied gases were in close agreement with literature values with differences between 2.2% and 8%, proving that the CAPS technology works at low pressures. The instrument's limit of detection, with respect to 3 times the variability of the background signal for the full pressure range, was 0.2 Mm^?1 for 60s integration time. During its first research aircraft operations, the IAGOS instrument prototype, composed of one CAPS PMex and one OPC, showed excellent results regarding the stability of the instruments and the potential for characterizing different aerosol types and for estimating the contribution of sub- and super-μm sized particles to aerosol light extinction.

Copyright © 2017 American Association for Aerosol Research     

Modified TiAlN coatings prepared by d.c. pulsed magnetron sputtering

Coatings like TiN or TiAlN are well established as hard and wear resistant tool coatings. These coatings often are prepared by PVD techniques like arc evaporation or d.c. magnetron sputtering. Typical micro hardness values of such hard coatings are in the range of 30 GPa. Compared to d.c. magnetron sputtering processes the pulsed magnetron sputter deposition technique could be shown as a clear advancement. Furthermore pure TiAlN hard coatings as well as TiAlN coatings modified by addition of elements like Si and Cr were prepared in order to improve the coating properties using the pulsed magnetron sputter technique in a batch coater equipped with 4 targets. Coatings prepared with the pulsed sputter process showed both high hardness and high wear resistance. The application potential of pulsed sputtered TiAlN coatings is demonstrated by turning test results of coated cemented carbide cutting inserts.Beside hardness and wear, other properties like adhesion or high temperature stability were determined. Cross sectional SEM images revealed the growth structure in dependence of the applied substrate bias and of the added elements. The chemical composition of the coatings was investigated by electron microprobe analysis and the phase and crystal size were determined by X-ray diffraction. Using the pulsed magnetron sputter process the coating properties, especially the hardness and the morphology, could be significantly improved. With indentation hardness values in the range of 40 GPa the region of super hard materials could be reached.     

Application of direct fluid flow oscillations to improve mixing in microbioreactors

This article describes an active mixing method for a microbioreactor that was designed, simulated, tested, and successfully implemented. By applying a varying pressure to a microchannel looping tangentially into a cylindrical microreactor an oscillating fluid flow was shown to occur. Such an oscillating fluid flow improved mixing, both by diffusion and convection. The oscillating fluid flow has a large impact on the ratio between the diffusion domain and the convection domain. A good match was obtained between experimental mixing results, computational fluid dynamics simulation results and the results of a simplified mixing model thus demonstrating the potential of simulation on improving the design of microreactors. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Discovery of Selective Luteinizing Hormone Receptor Agonists Using the Bivalent Ligand Method

Two series of dimeric ligands for a G‐protein‐coupled receptor were prepared that differ by the interconnecting spacer system. Biological evaluation revealed that both dimeric series exhibit unique biological properties relative to their monomeric counterparts.

     

Thermal stability of metal-supported catalysts for reduction of cold-start emissions in a wood-fired domestic boiler

The aim of the present work is to develop a catalyst based on a mixture of manganese oxides and platinum supported on a metallic monolith for abatement of emissions from wood combustion, particularly during the cold-start phase. The activity and the thermal stability of the catalysts have been studied in the laboratory, before performing tests in a wood-stove. The effect of the hydrothermal treatment at 900°C on the adherence of the washcoat onto a metallic substrate was studied using scanning electronic microscope. It revealed well-adhering washcoat onto the metallic support due to the growth of the alumina whiskers during the treatment. The influence of the amount of washcoat, as well as the influence of the concentration of manganese oxides in it (Mn: 5 to 20 mol%/Al₂O₃) on the activity of fresh and hydrothermally-treated catalysts were studied. The activity tests were carried out using a mixture of carbon monoxide, naphthalene and methane in the presence of air, steam and carbon dioxide to resemble the flue gases from wood combustion. On the fresh catalysts, containing the same total amount of manganese, a high concentration of manganese oxides in the washcoat favoured the oxidation of carbon monoxide and naphthalene, whereas a lower concentration of manganese oxides in the washcoat gave higher activity for the oxidation of methane. An increased total amount of manganese oxides in the catalysts, which had the same amount of washcoat, resulted in an increase in activity for the oxidation of the three combustibles. After thermal treatment at 900°C for 270 h in steam, most of the manganese oxide catalysts were activated for the oxidation of carbon monoxide and naphthalene while only being slightly deactivated for the oxidation of methane. The addition of manganese oxides in the washcoat, however, lowers the temperature of the γ- to -alumina phase transformation. Platinum (0.5 mol%) was added to the manganese oxide (10 mol%) catalyst to improve its activity. A platinum catalyst was also tested for comparison. The platinum and the mixed catalysts showed similar activity for the oxidation of carbon monoxide and naphthalene, while the mixed catalysts were more active for the oxidation of methane. A similarly mixed MnO_x–Pt (10–0.5 mol%) catalyst supported on Al₂O₃ stabilised with 3% lanthanum, but at larger scale, was tested in a wood-stove. The possibility of pre-heating the catalyst during the start-up phase was studied. The tests revealed a strong decrease of the carbon monoxide and unburned hydrocarbons emissions during the start-up phase when the catalyst was pre-heated with hot air compared with no pre-heating or no catalyst.     

Across-family marker-assisted selection using selective genotyping strategies in dairy cattle breeding schemes

This study investigated the potential loss expected from marker-assisted selection (MAS) when only a proportion of animals are genotyped using several selective genotyping strategies. A population resembling a commercial dairy cattle population over 25 yr was simulated, and the most informative individuals for genotyping were identified among the potential breeding candidates (young bulls and bull-dams). Two strategies were used to identify the most informative animals. The first genotyping strategy was based on selecting individuals for genotyping with predicted total genetic effect [sum of the predicted quantitative trait locus (QTL) and polygenic effects] close to the truncation point for selection. The second strategy used an index that extended the previous strategy to include the variance due to segregation of the QTL in the parents. The 2 strategies for selective genotyping were applied at the 2 different genotyping levels and compared with random selection of candidates for genotyping and complete genotyping of the potential candidates. All selective genotyping strategies at the same proportion of genotyping showed similar cumulative genetic level. The frequency of the favorable QTL allele increased faster with more animals genotyped. Extra response in total genetic effect (polygenic and QTL) was not significantly different between genotyping all candidates (100%), 20%, and 50% genotyping (except for yr 13), but all MAS strategies resulted in significantly higher response than BLUP until yr 18. With 50% (20%) genotyping of candidates for selection within a population, 95% (89%) of maximum cumulative QTL response was achieved in yr 13. All MAS schemes resulted in a 19% decrease in the rate of inbreeding compared with the BLUP scheme. Therefore, it is possible to use selective genotyping in practical dairy cattle breeding and decrease the genotyping costs with a minimal loss of response compared with complete genotyping of the potential candidates.     

DNA barcoding to confirm morphological traits and determine relative abundance of burrowing mayfly species in western Lake Erie

Burrowing mayfly species of the genus Hexagenia are well known indicators of environmental health in lakes and rivers. Two species, H. limbata and H. rigida, are indistinguishable as nymphs and as adult females. Our objectives were to develop a genetic technique to distinguish between the two species and identify morphological features that separate cryptic nymphs and adult females. Fifty nymphs were collected before emergence from 10 sites throughout the western basin of Lake Erie in 2004 and 2005. Using known specimens of adult aerial male H. limbata and H. rigida, we used the mitochondrial cytochrome c oxidase subunit 1 (COI) gene to identify a 16 base pair (bp) difference between species. DNA sequencing confirmed correct species identification based on differences in abdominal pigmentation patterns on adult female imagos in 19 of 20 cases; the lone exception was a female with very faint pigmentation. Pigmentation patterns between species were consistent on nymphs, subimagos and imagos of both sexes. Populations of both species are panmictic across the western basin of Lake Erie, but H. limbata is the numerically dominant species, representing 70 to 100% of nymphs at sites in both years. A separate lineage of H limbata was discovered in the samples. The ability to distinguish nymphs of the two species will aid in developing more sensitive ecosystem indicators.     

The influence of diets containing either conventional corn, conventional corn with choice white grease, high oil corn, or high oil high oleic corn on belly/bacon quality

The objectives of this study were to evaluate diets possessing different fatty acid profiles (as influenced by corn type) with regard to fatty acid profile and firmness of pork bellies. Crossbred barrows (n=196) were fed one of four corn-based diets consisting of conventional corn (CONV), CONV with choice white grease (CWG), high oil corn (HOC), or high oleic, high oil corn (HOHOC). Following 98 days on test, two animals representing the average pen weight (118 kg) were selected for harvest (n=56). A 50-g fat sample was removed from each belly for fatty acid profile analysis. Lateral and vertical flex tests were performed to determine belly firmness. Bellies were pumped and cooked according to a commercial protocol. Total saturated fatty acids increased (P<0.001) and total unsaturated fatty acids decreased (P<0.05) when CWG was added to the CONV diet or when HOC or HOHOC were substituted for CONV corn. Pigs fed CONV corn had firmer bellies, while those fed HOC were softer. No differences were observed across treatment for percentage pump retention, smokehouse yield, or slicing yield (P>0.05). Based on the results of this study, corn type influences fatty acid profile, and belly firmness, but does not affect pump retention, or slicing yields.     

Anatomical and histological changes in the oviducts of Japanese quail, Coturnix japonica, after embryonic exposure to ethynyloestradiol

Oestrogen is needed for normal oviductal development in female birds, but excessive early exposure to oestrogen can cause oviductal abnormalities and impair egg-laying ability. In this study, the anatomical and histological effects of in ovo exposure to the synthetic oestrogen ethynyloestradiol on the oviducts of immature and adult female Japanese quail, Coturnix japonica, were investigated. A series of abnormalities was observed after injection of ethynyloestradiol (2 or 20 ng g(-1) egg) into the yolk on day 3 of incubation. Ethynyloestradiol induced precocious differentiation of the luminal epithelium and tubular glands in immature chicks. Right-side oviduct retention occurred at all the ages studied, whereas certain other effects were not evident until sexual maturity. The left oviduct was reduced in size and tubular gland density in the uterus (shell gland) was reduced in sexually mature birds that had been treated with ethynyloestradiol. The utero-vaginal junction was longer than in control birds and had a higher tubular gland density. The epithelial cells in the magnum were taller in birds treated with ethynyloestradiol. Embryonic exposure to the environmental contaminant ethynyloestradiol may cause persisting structural malformations in oviducts of quails, which can impair fertility. As oviductal malformations are indicative of embryonic exposure to exogenous oestrogen, they are potentially useful as biomarkers of xenooestrogen exposure in wild bird populations.     

Seasonal Effects of Hydropeaking on Growth,Energetics and Movement of Juvenile Atlantic Salmon (Salmo Salar)

The performance and movements of juvenile Atlantic salmon Salmo salar exposed to variable water discharge (simulating hydropeaking) but with a stable water‐covered area were studied in six experimental stream channels, both during the winter and summer. Thirty fish were stocked into each channel, and the growth, body fat and movements of the fish were followed for about 2.5 months in each season. During the winter, no effect of hydropeaking was documented on performance or movement. In the summer, fish experiencing hydropeaking had lower body mass, lower body fat, and higher movement rates than the control fish. In general, effect sizes were small, and the rapid and frequent changes in water discharge and water level in the present study had small effects on the performance of juvenile Atlantic salmon. The cumulative long‐term effect at the population level is unknown, but a reduced growth rate of 10% and a reduction in body fat of 16% in the hydropeaking experiments in the summer might to some extent translate into increased smolt age and lower overwintering survival. Copyright © 2014 John Wiley & Sons, Ltd.