The influence of hydroelectric power generation on the body composition of juvenile Atlantic salmon

The fat and protein content, and thus energy resources of young (parr) Atlantic salmon (Salmo salar) were examined in a temperate river. Juvenile salmon exhibited distinct seasonal patterns of energy storage and use. The lowest levels of energy were found towards the end of winter (mean mass specific energy about 4.3 kJ·g^?1). There was a rapid accumulation of fat in spring/early summer in spite of low‐water temperatures (highest mean content of mass specific energy of about 5.0 kJ·g^?1 in June). By early autumn (August) there was a rapid depletion of fat and energy resources. The decline in specific energy during late summer was of the same magnitude as the corresponding winter decline. Furthermore, total fat and protein content, and thus energy resources of juveniles below a hydroelectric power plant (hydrostation (HS)) differed from those at a (lower) reference station (RS). The younger fish exhibited higher gains, but also larger losses of energy resources compared to corresponding values at the RS. Specifically during the summer, young of year (YOY) had 31% lower total energy content at the regulated site (mean 1.27 kJ per individual) than the RS (mean 1.84 kJ). Higher mortality may occur at the site most affected by the hydroelectric plant, where energy resources on average were higher, but where depletion was also most severe. Copyright © 2006 John Wiley & Sons, Ltd.     

One-dimensional axial simulation of electric double layer overlap effects in devices combining micro- and nanochannels

This paper presents a numerical steady-state model of ion transport in micro- and nanofluidic devices with widely varying geometric scale, such as transitions between micro- and nanochannels. Finite element or finite volume simulation of such problems is challenging, due to the number of elements needed to produce a satisfactory mesh. Here, only the lengthwise channel dimension is meshed; standard analytical approximations are used to incorporate cross-channel properties. Singularly perturbed cases are built up by continuation. The method is shown to reproduce our previously reported measurements of electric double-layer effects on conductivity, ion concentration, and ion enhancement and depletion. Comparison with 2-D simulations reported in the literature shows that effects on accuracy due to the 1-D approximation are small. The model incorporates analytical models of surface charge density taken from the literature. This enables predictive simulation with reasonable accuracy using published parameter values, or these values may be tuned based on experiment to give improved results. Use of the model for iterative design and parameter estimation is demonstrated.     

THE UPGRADING OF SOLVENT REFINED COALS AND LIGNITES: DETERMINATION OF AN EFFECTIVE HETEROGENOUS CATALYST CARRIER

The hydrodenitrogenation, hydrodesulfurization and hydrocracking of solvent refined coals and lignites was accomplished with catalysts comprising high surface area, large pore diameter bases impregnated with MoO₃,CoOand WO₃. The most effective catalysts were those which performed well in hydrodenitrogenating nitrocellulose. This indicates that most of the pore diameter is consistently large enough to accommodate molecules of the size of liquified coal and lignite.     

Apolipoprotein E*3-Leiden transgenic mice as a test model for hypolipidaemic drugs

PURPOSE: We report an investigation into the distribution of proteoglycans (PGs) in normal, organ-cultured and dextran-treated human corneas. METHODS: Immunogold labeling was carried out at the electron microscope level to localize keratan sulphate (KS), chondroitin sulphate (CS), and heparan sulphate (HS) PGs. RESULTS: High levels of labeling for CS was found in the epithelium, endothelium, and keratocytes, with light labelling present in the basement membranes and the corneal stroma. Labeling for HS was present in the epithelium, endothelium, and keratocytes, with intense labeling present at the endothelium/Descemet's membrane interface and the epithelium/Bowman's layer interface. Large filaments were also observed in these regions in cuprolinic blue-stained specimens. Keratan sulphate was present at high levels in the stroma and the basement membranes with low levels present within the keratocytes, epithelium, and endothelium. The pattern of KS labeling along the collagen fibrils in the stroma sometimes showed evidence of periodicity. Organ-cultured corneas had extensive collagen-free "lakes," the interior of which immunolabeled positively for KS and showed staining with cuprolinic blue. The lakes were greatly reduced in the dextran-treated samples. CONCLUSION: This investigation determined the ultrastructural distribution of KS, CS, and HS PGs in human cornea and showed that organ culture is associated with a change in distribution of stromal PGs.     

The Peyer's patch high endothelial receptor for lymphocytes, the mucosal vascular addressin, is induced on a murine endothelial cell line by tumor necrosis factor-alpha and IL-1

The specificity of lymphocyte homing from the blood into a tissue is determined in part by complementary pairs of adhesion receptors on lymphocytes and endothelial cells termed homing receptors and vascular addressins, respectively. The mucosal vascular addressin involved in lymphocyte homing to Peyer's patches is a 66-kDa glycoprotein, MAdCAM-1. Investigation of the regulation and molecular genetics of MAdCAM-1 have been hampered by the lack of a murine cell line expressing this adhesion molecule. We show herein using indirect immunofluorescence studies that MAdCAM-1 can be induced on a murine endothelial cell line, bEnd.3, by cytokines and LPS. Western blot analysis of MAdCAM-1 purified by affinity column chromatography from TNF-alpha-treated bEnd.3 cells demonstrates a 66-kDa protein that comigrates in SDS-PAGE with the MAdCAM-1 constitutively found on high endothelial venules in murine mesenteric lymph nodes. Comparison of MAdCAM-1 expression on the bEnd.3 cells was made to the expression of adhesion molecules ICAM-1 and VCAM-1. MAdCAM-1 and VCAM-1 are not constitutively expressed on the bEND.3 surface but can be induced in a concentration-dependent manner by LPS, TNF-alpha, and IL-1. ICAM-1 is constitutively expressed on the endothelioma surface and expression is increased by TNF-alpha, IL-1, LPS, and IFN-gamma. Surface expression of MAdCAM-1 peaks 12 to 18 h after exposure to TNF-alpha and remains elevated at 48 h, whereas expression of VCAM-1 peaks at 4 h and inducible ICAM-1 peaks between 4 and 18 h. Interestingly, IFN-gamma has differential effects on expression of these three adhesion receptors. IFN-gamma alone induces VCAM-1 and enhances ICAM-1 expression, but does not induce MAdCAM-1. Furthermore, although, preincubation of bEND.3 cells with IFN-gamma modestly increases the induction of ICAM-1 and VCAM-1 in response to TNF-alpha and IL-1, it dramatically reduces the TNF-alpha, IL-1, and LPS-induced expression of MAdCAM-1. MAdCAM-1 on bEnd.3 cells is functional as the murine T lymphoma TK1, known to bind MAdCAM-1, also binds to TNF-alpha-stimulated endothelioma but not to unstimulated cells. This binding is blocked by the antibodies against MAdCAM-1 and against the alpha 4-chain of its integrin receptor, alpha 4 beta 7, on TK1 cells.(ABSTRACT TRUNCATED AT 400 WORDS)     

Muscular capabilities and workload of flight attendants for pushing and pulling trolleys aboard aircraft

Increasingly in the recent years, passengers’ services are extended into the ascent and descent flight phases on short distance flights. Trolleys containing the required meal and beverage items are used for these service operations and pushed or pulled along the aisles of the aircraft. Flight attendants reported about increased musculo-skeletal disorders and had been complaining about high physical workload from handling trolleys. In order to ensure acceptable load levels for pushing or pulling operations of trolleys, the physical capabilities of the collective “flight attendants” had been investigated by means of force measurements at maximum voluntary contraction (MVC) level and associated relevant anthropometrical and biometrical data. CEN and ISO standards as well as international and national German methods were used to derive recommended force limits for pushing/pulling operations with respect to the physical capabilities of the target group “flight attendants”. Comparing these recommended limits with the force requirements per shift under various conditions of trolley handlings (inclination of the floor, type and weight of trolley, mode of handling, frequency of operation) showed that especially for higher floor inclinations and trolley weights, flight attendants work (substantially) above recommended limits. It became also apparent that the handling of half-size trolleys is unexpectedly high demanding due to high vertical force components, caused by the unfavorable location of their center of gravity.

Relevance to industry

On short-distance flights, passengers’ services are performed by means of trolleys from the ascent to the descent flight phases. Flight attendants had been complaining about high physical workload. This study offers recommendations on maximum force limits for the handling of trolleys with respect to the muscular capacities and work situations of flight attendants on short-distance flights.     

Correlation between airborne particle concentrations in seven industrial plants and estimated respiratory tract deposition by number,mass and elemental composition

The number and mass distribution of airborne particles were recorded in several industrial plants. From the data obtained, particle deposition was estimated in three regions of the respiratory tract using the ICRP grand average deposition model based on Hinds' (1999) parameterization. The median diameter was 30–70 nm (number distributions), and >4 μm (mass distributions) near most work activities, resulting in linear relationships between the deposited number/mass concentrations and the number/mass concentrations in the air. Welding and laser cutting produced particles in the 200–500-nm range; total deposition was small, not in accordance with the linear relationship observed for the other work activities. The elemental content varied between particle sizes in some workplaces, causing different elements to deposit in different respiratory regions. Iron was the most abundant element in the particles in many of the workplaces; in an iron foundry, however, Fe was most abundant only in the micron-sized particles whereas the nanoparticles mainly comprised Pb and Sb.     

Application of Acoustic Emission Measurements to Investigate Adhesion in Filled Polymeric Composites

Adhesion in filled polymeric composites is characterized by an acoustic technique in which specimens of the composites are subjected to a ramped uni-axial tensile stress while particle-matrix debonding events are detected acoustically. The maximum in a fitted distribution of debonding events as a function of applied stress is related to the interfacial strength using elasticity theory. Results are reported for different silanetreated and untreated glass and aluminum spheres embedded in a poly(vinyl butyral) matrix. Silane treatment profoundly affects the adhesive strength, with the strongest bonds being formed when acid-base interactions between the particle surface and the matrix polymer are promoted. Significant differences are also found between the aluminum-particle and glass-particle cases, attributable in part to differences in mechanical interlocking.     

Ion substitution induced formation of spherical ceramic particles

How to precipitate ceramic nano- and microspheres in water based solutions only using inorganic ions is a challenge. In this study, spherical particles of alkaline earth phosphates and fluorides were synthesized using a precipitation reaction. Substituting ions, through inhibition of crystal growth, was used to induce sphere formation and to alter the morphology, size and composition of the spheres. The difference in ionic radius between the substituting ion (Mg, Ca and Sr) and the main cation (Sr and Ba) influenced the critical concentration to allow for sphere formation as well as the crystallinity. The larger difference, the lower was the concentration needed to form spheres. Low concentrations of Mg was enough to generate amorphous spheres of Sr- and Ba-phosphates whereas higher concentrations were needed if the radius difference were smaller. An increasing degree of substitution leads to a decrease in crystallinity of precipitated particles. The degree of substitution was determined to 16–55% where a low degree of ion substitution in the phosphates resulted in the formation of spheres (500–800?nm) with rough surfaces composed of apatite like phases. A higher degree of substitution resulted in amorphous spheres (500?nm- 1?μm) with smooth surfaces.     

Thermal stability of metal-supported catalysts for reduction of cold-start emissions in a wood-fired domestic boiler

The aim of the present work is to develop a catalyst based on a mixture of manganese oxides and platinum supported on a metallic monolith for abatement of emissions from wood combustion, particularly during the cold-start phase. The activity and the thermal stability of the catalysts have been studied in the laboratory, before performing tests in a wood-stove. The effect of the hydrothermal treatment at 900°C on the adherence of the washcoat onto a metallic substrate was studied using scanning electronic microscope. It revealed well-adhering washcoat onto the metallic support due to the growth of the alumina whiskers during the treatment. The influence of the amount of washcoat, as well as the influence of the concentration of manganese oxides in it (Mn: 5 to 20 mol%/Al₂O₃) on the activity of fresh and hydrothermally-treated catalysts were studied. The activity tests were carried out using a mixture of carbon monoxide, naphthalene and methane in the presence of air, steam and carbon dioxide to resemble the flue gases from wood combustion. On the fresh catalysts, containing the same total amount of manganese, a high concentration of manganese oxides in the washcoat favoured the oxidation of carbon monoxide and naphthalene, whereas a lower concentration of manganese oxides in the washcoat gave higher activity for the oxidation of methane. An increased total amount of manganese oxides in the catalysts, which had the same amount of washcoat, resulted in an increase in activity for the oxidation of the three combustibles. After thermal treatment at 900°C for 270 h in steam, most of the manganese oxide catalysts were activated for the oxidation of carbon monoxide and naphthalene while only being slightly deactivated for the oxidation of methane. The addition of manganese oxides in the washcoat, however, lowers the temperature of the γ- to -alumina phase transformation. Platinum (0.5 mol%) was added to the manganese oxide (10 mol%) catalyst to improve its activity. A platinum catalyst was also tested for comparison. The platinum and the mixed catalysts showed similar activity for the oxidation of carbon monoxide and naphthalene, while the mixed catalysts were more active for the oxidation of methane. A similarly mixed MnO_x–Pt (10–0.5 mol%) catalyst supported on Al₂O₃ stabilised with 3% lanthanum, but at larger scale, was tested in a wood-stove. The possibility of pre-heating the catalyst during the start-up phase was studied. The tests revealed a strong decrease of the carbon monoxide and unburned hydrocarbons emissions during the start-up phase when the catalyst was pre-heated with hot air compared with no pre-heating or no catalyst.