High‐Density Stretchable Electrode Grids for Chronic Neural Recording

Electrical interfacing with neural tissue is key to advancing diagnosis and therapies for neurological disorders, as well as providing detailed information about neural signals. A challenge for creating long‐term stable interfaces between electronics and neural tissue is the huge mechanical mismatch between the systems. So far, materials and fabrication processes have restricted the development of soft electrode grids able to combine high performance, long‐term stability, and high electrode density, aspects all essential for neural interfacing. Here, this challenge is addressed by developing a soft, high‐density, stretchable electrode grid based on an inert, high‐performance composite material comprising gold‐coated titanium dioxide nanowires embedded in a silicone matrix. The developed grid can resolve high spatiotemporal neural signals from the surface of the cortex in freely moving rats with stable neural recording quality and preserved electrode signal coherence during 3 months of implantation. Due to its flexible and stretchable nature, it is possible to minimize the size of the craniotomy required for placement, further reducing the level of invasiveness. The material and device technology presented herein have potential for a wide range of emerging biomedical applications.     

Solid-phase epitaxy of undoped amorphous silicon by in-situ postannealing

The solid phase epitaxy (SPE) of undoped amorphous Si (a-Si) deposited on SiO₂ patterned Si(001) wafers by reduced pressure chemical vapor deposition (RPCVD) using a H₂-Si₂H₆ gas system was investigated. The SPE was performed by applying in-situ postannealing directly after deposition process. By transmission electron microscopy (TEM) and scanning electron microscopy, we studied the lateral SPE (L-SPE) length on sidewall and mask for various postannealing times, temperatures and a-Si thicknesses. We observed an increase in L-SPE growth for longer postannealing times, temperatures and larger Si thicknesses on mask. TEM defect studies revealed that by SPE crystallized epi-Si exhibits a higher defect density on the mask than at the inside of the mask window. By introducing SiO₂-cap on the sample with 180 nm Si thickness following postannealing at 570 °C for 5 h, the crystallization of up to 450 nm epi-Si from a-Si is achieved. We demonstrated the possibility to use this technique for SiGe:C heterojunction bipolar transistor (HBT) base layer stack to crystallize Si-buffer layer to widen the monocrystalline region around the bipolar window and to improve base link resistivity of the HBT.     

p‐TCOs für Transparente Elektronik

p‐type TCOs for use in transparent electronics In this article, a new type of semiconducting material is introduced. Transparent conducting thin films are already established in our everydaylife. But the type of these so‐called ?TCOs”? is dominated by electron transport, that means they are n‐type. To get transparent p‐n‐junctions and therefore transparent electronics, the missing part is a transparent p‐type material. Researchers all over the world have found different approach to produce this new generation of materials. At the Fraunhofer Institute for Surface Engineering and Thin Films (IST) in Braunschweig it is now possible to produce these kind of thin films as well.     

Die elastische Verformung der Walzen von Vierwalzengerüsten

Die Belastung der Stütz- und der Arbeitswalzen. Elastizitätstheoretische Analyse der Walzenverformung. Die Verschiebung der Walzen bei Lastsprüngen und bei geringer Ausdehnung der auf den Walzenballen wirkenden Belastung. Die Walzenverschiebung für eine über dem Walzenballen beliebig verteilte Belastung. Gleichungen zur Bestimmung der Lastverteilung zwischen Stütz- und Arbeitswalze und der Verschiebung der Arbeitswalze im Walzspalt. Einfluß des Lastsprunges an den Walzgutkanten auf die Walzspaltform und das Dickenprofil des Walzgutes.     

Studies on the sample weight for ochratoxin A determination in raw coffee

Ochratoxin A is a mycotoxin that may cause damage to the kidneys and the immune system in man. Foods are examined for this contaminant by the laboratories responsible for official food control. At present, there are no specific provisions for the sampling and examination of ochratoxin A in foods. Therefore, recourse is made to the provisions for aflatoxins. They prescribe the processing of samples with a weight of up to 30 kg. The examination of raw coffee for ochratoxin A in conjunction with the German Food Monitoring Programme of 2000 was undertaken with various sample weights (5, 10 and 30 kg) in order to identify the influence of the sample weight on the result. Overall, the sample weight did not have an effect on the detection and level of the ochratoxin A content in the samples of raw coffee examined.     

The effect of water temperature on the adsorption equilibrium of dissolved organic matter and atrazine on granular activated carbon

The influence of water temperature on the adsorption of natural dissolved organic matter (DOM) on activated carbon has not been investigated intensively yet. In this study, batch experiments with granular activated carbon (GAC) have been carried out at three temperatures (5 degrees C, 20 degrees C, 35 degrees C) using a humic acid model water and different types of surface water (lake, river, canal). Furthermore, the adsorption of an anthropogenic contaminant, atrazine, was quantified in the absence and presence of DOM. The results indicate a significant influence of water temperature on the adsorption equilibrium of DOM and atrazine. Contrary to expectations, DOM and atrazine adsorption in surface water tends to be increased with increasing water temperature, whereas the extent of this effect is dependent on the type and concentration of DOM. Furthermore, the temperature effect on atrazine adsorption is controlled by competition of DOM and atrazine on adsorption sites. Some assumptions are proposed and discussed for explaining the temperature effects observed in the batch studies.     

Use of commercial protease preparations to reduce protein and lipid content of maize starch

A method was developed to produce pure maize starch from maize flour using a protease processing step, and additional salt washing and sulphite steeping steps. A range of commercial protease enzymes were evaluated for this purpose. The laboratory scale procedure that was developed, using one protease in particular (Promod P25P, thermolysin), produced relatively pure starch (<0.45% protein). Using the same procedure, but applying to starches which had been produced in advance using traditional wet milling, starch protein contents could be reduced further by 25–50% with the lipid content reduced by up to 25%. The amount of starch damage was minimal using this approach (<1%). This procedure could be developed industrially for a ‘greener approach’ to starch extraction – although it may still be necessary to incorporate sulphite steeping stages to facilitate protein solubilisation and extraction.     

Environmental chemistry of aminopolycarboxylate chelating agents

Aminopolycarboxylate chelating agents are under scrutiny due to their influence on metal availability and mobility and in particular due to their persistence in the environment. In this review chelate adsorption, metal-mobilization, metal-exchange, mineral dissolution, reactive transport, photodegradation, and chemical degradation are all shown to be substantially affected by the chelated metal ion. The different reactivities of the metal-complexes have to be considered when assessing the reactions of chelating agents in the environment because they occur in natural waters predominantly in the form of metal complexes. Knowing the speciation of chelating agents in natural waters is therefore crucial for predicting their environmental fate. Despite this importance, only a few speciation measurements have been reported for natural waters, and model calculations have been frequently used instead. These calculations are, however, complicated by slow metal-exchange reactions that result in a nonequilibrium speciation and by the presence of naturally occurring ligands that compete with the chelating agents for available metals. The basis for a refined risk assessment of aminocarboxylate chelates should be the actual speciation in the natural water directly determined by analytical methods. The discussion of the influence of chelates on metal availability and fate also has to include the potential presence of other aminopolycarboxylate chelating agents besides the well-known EDTA and NTA.     

Source reconciliation of atmospheric gas-phase and particle-phase pollutants during a severe photochemical smog episode

A comprehensive organic compound-based receptor model is developed that can simultaneously apportion the source contributions to atmospheric gas-phase organic compounds, semivolatile organic compounds, fine particle organic compounds, and fine particle mass. The model is applied to ambient data collected at four sites in the south coast region of California during a severe summertime photochemical smog episode, where the model determines the direct primary contributions to atmospheric pollutants from 11 distinct air pollution source types. The 11 sources included in the model are gasoline-powered motor vehicle exhaust, diesel engine exhaust, whole gasoline vapors, gasoline headspace vapors, organic solvent vapors, whole diesel fuel, paved road dust, tire wear debris, meat cooking exhaust, natural gas leakage, and vegetative detritus. Gasoline engine exhaust plus whole gasoline vapors are the predominant sources of volatile organic gases, while gasoline and diesel engine exhaust plus diesel fuel vapors dominate the emissions of semivolatile organic compounds from these sources during the episode studied at all four air monitoring sites. The atmospheric fine particle organic compound mass was composed of noticeable contributions from gasoline-powered motor vehicle exhaust, diesel engine exhaust, meat cooking, and paved road dust with smaller but quantifiable contributions from vegetative detritus and tire wear debris. In addition, secondary organic aerosol, which is formed from the low-vapor pressure products of gas-phase chemical reactions, is found to be a major source of fine particle organic compound mass under the severe photochemical smog conditions studied here. The concentrations of secondary organic aerosol calculated in the present study are compared with previous fine particle source apportionment results for less intense photochemical smog conditions. It is shown that estimated secondary organic aerosol concentrations correlate fairly well with the concentrations of 1,2-benzenedicarboxylic acid in the atmospheric fine particle mass, indicating that aromatic diacids may be useful in the quantification of certain sources of secondary organic aerosol in the atmosphere.     

Extraction of heavy metals from soils using biodegradable chelating agents

Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.