Mirror or Molder? A Study of Media Coverage,Stock Prices,and Trading Volumes in Germany

This article investigates the short‐term relationship between media coverage, stock prices, and trading volumes of eight listed German companies. A content analysis of news reports about the selected companies and a secondary analysis of the daily changes in closing prices and the trading volumes of these companies were combined in a time‐series design. After ARIMA‐modeling each of them, the results suggest that media coverage rather reflects than shapes the development at stock exchanges from a short‐term perspective (2 months). There were almost no hints for a widespread media effect, that is, an impact on so many investors that it will result in a measurable change in stock prices or trading volumes. Finally, theoretical and methodological consequences for exploring widespread media effects are discussed.     

High-Power Single-Mode Distributed-Feedback Interband Cascade Lasers for the Midwave-Infrared

A single-mode output power of 41 mW has been obtained at T=120 K and lambdaap3.44 mum from a narrow-ridge interband cascade laser patterned with a Ge distributed-feedback grating. The sidemode suppression ratio at the maximum power is 23 dB, and the linewidth of 0.1 nm is instrument-limited. An alternate contacting geometry yielded robust single-mode output over a broad range of currents and temperatures, and current tuning of the wavelength by up to 17 nm     

Design optimization for high-brightness surface-emitting photonic-crystal distributed-feedback lasers

A new time-domain Fourier-Galerkin (TDFG) theory is developed to simulate the near-field, far-field and spectral characteristics of surface-emitting photonic-crystal distributed-feedback (SE PCDFB) lasers. It is found that a properly-designed two-dimensional hexagonal or square-lattice grating should efficiently couple the output into a single SE mode that retains coherence for aperture diameters of up to /spl ap/1 mm. We identify lattice structures and precise conditions under which all components of the transverse electric or transverse magnetic polarized optical fields constructively interfere to produce a single-lobed, near-diffraction-limited circular output beam. The TDFG simulations predict that quantum efficiencies as high as 30% (60% if reflectors are built into the waveguide structure) should be attainable. A surprising conclusion is that diffractive coupling into the surface-emitting direction must be relatively weak, in order to assure selection of the desired symmetric in-phase mode. Furthermore, gain media with a moderate linewidth enhancement factor should produce the best SE PCDFB performance, whereas edge emitters nearly always benefit from a very small value.     

Influence of device engineering on the analog and RF performances of SOI MOSFETs

This work presents a systematic comparative study of the influence of various process options on the analog and RF properties of fully depleted (FD) silicon-on-insulator (SOI), partially depleted (PD) SOI, and bulk MOSFET's with gate lengths down to 0.08 /spl mu/m. We introduce the transconductance-over-drain current ratio and Early voltage as key figures of merits for the analog MOS performance and the gain and the transition and maximum frequencies for RF performances and link them to device engineering. Specifically, we investigate the effects of HALO implantation in FD, PD, and bulk devices, of film thickness in FD, of substrate doping in SOI, and of nonstandard channel engineering (i.e., asymmetric Graded-channel MOSFETs and gate-body contacted DTMOS).     

Implementation of an Aerostat Positioning System With Cable Control

The capabilities of a multi-tethered aerostat positioning system are investigated using experimental and simulation results. The system consists of a platform supported by a helium-filled aerostat and attached to three anchored ground tethers actuated using computer-controlled winches. The experimental system was designed to perform a proof-of-concept study of a novel large-scale radio telescope requiring a receiver to be positioned accurately at an altitude of up to 500 m. Results from a series of flight tests are presented with a comparison between the passive response of the system and the response using proportional, integral, and derivative (PID) controllers with a position feedback. The motion of the platform is smaller for all cases using the feedback control. To improve on the PID results, a dynamics model of the system is used to develop and simulate optimal and feedforward (FF) control strategies. The optimal linear quadratic Gaussian (LQG) controller offers a 50% improvement over the PID controller, and both the LQG and the PID feedback controllers were shown to benefit considerably from the addition of a FF control term that exploits the measurements of the system's main disturbance force     

Dynamic resource allocation in OFDM systems: an overview of cross-layer optimization principles and techniques

Recently, a lot of research effort has been spent on cross-layer system design. It has been shown that cross-layer mechanisms (i.e., policies) potentially provide significant performance gains for various systems. In this article we review several aspects of cross-layer system optimization regarding wireless OFDM systems. We discuss basic optimization models and present selected heuristic approaches realizing cross-layer policies by means of dynamic resource allocation. Two specific areas are treated separately: models and dynamic approaches for single transmitter/receiver pairs (i.e., a point-to-point communication scenario) as well as models and approaches for point-to-multipoint communication scenarios (e.g., the downlink of a wireless cell). This article provides basic knowledge in order to investigate future OFDM cross-layer-optimization issues     

End of life management of industrial robots

End of life management (EOL) is currently a hot topic in the electronics industry. Currently, mostly IT equipment and goods of consumer electronics are considered. In the nearest future automation equipment has also to be taken into account. There are three possibilities depending on the age and kind of the device: resell–reuse–recycle, called the “3Rs”. For recycling fully or semi-automated disassembly will gain in importance in the nearest future also for robots. Producers of robots have to take into account EoL because of regulations and laws as well as according to ethical codes contributing to protection of the environment. Based on previous works a real example will be presented and discussed.     

Wear‐Resistant Nanoscale Silicon Carbide Tips for Scanning Probe Applications

The search for hard materials to extend the working life of sharp tools is an age‐old problem. In recent history, sharp tools must also often withstand high temperatures and harsh chemical environments. Nanotechnology extends this quest to tools such as scanning probe tips that must be sharp on the nanoscale, but still very physically robust. Unfortunately, this combination is inherently contradictory, as mechanically strong, chemically inert materials tend to be difficult to fabricate with nanoscale fidelity. Here a novel process is described, whereby the surfaces of pre‐existing, nanoscale Si tips are exposed to carbon ions and then annealed, to form a strong silicon carbide (SiC) layer. The nanoscale sharpness is largely preserved and the tips exhibit a wear resistance that is orders of magnitude greater than that of conventional silicon tips and at least 100‐fold higher than that of monolithic, SiO‐doped diamond‐like‐carbon (DLC) tips. The wear is well‐described by an atom‐by‐atom wear model, from which kinetic parameters are extracted that enable the prediction of the long‐time scale reliability of the tips.     

High-power/low-threshold type-II interband cascade mid-IR laser-design and modeling

We present an optimized design and detailed numerical simulations for a mid-IR type-II interband InGaSb QW cascade laser (T2ICL) with InAs-In/sub 0.3/Ga/sub 0.7/Sb active quantum wells. It is shown that a 15-period T2ICL operating at 300 K and emitting at 3.15 /spl mu/m should achieve a much higher differential quantum efficiency (maximum of 0.9 W/A per facet at 300 K) than conventional mid-IR bipolar injection lasers, and a threshold current density much lower than for the intersubband quantum cascade laser.     

Spatially constrained coordinated navigation for a multi-robot system

In this paper we present a method for navigating a multi-robot system through an environment while additionally maintaining a predefined set of constraints. Examples for constraints are the requirement to maintain a direct line-of-sight between robots or to ensure that the multi-robot system maintains communication. Our approach is based on graph structures that model movements and constraints separately, in order to cover different kind of robots and a large class of possible constraints. Additionally, the separation of movement and constraint graph allows us to use known graph algorithms like Steiner tree heuristics or the multi-point relay algorithm to solve the problem of finding a target configuration for the robots. To connect the movements of the robots with the given constraints, we introduce separated connection graphs which allow assembling valid navigation plans fast. This paper presents some theoretical insight into the problem of coordinated navigation for multi-robot systems with spatial constraints as well as a practical solution. Experiments in simulation and with real robots show the feasibility of the approach.