Modeling of the refractive index and extinction coefficient of binary composite films

Southwell's analysis of optical multilayers within the limits of very thin films has been extended to include absorption in the multilayer for predicting the effective values of the refractive index n(e) and extinction coefficient k(e) of mixed-composition binary homogeneous films over a wide spectral region, including the high-absorption (k > 10(-2)) region. It has been found that n(e) in general is a complicated function of the optical parameters (n(1), k(1), n(2), k(2)) and volume fractions (f(1), f(2)) of the component materials in a homogeneous layer, and the expression for n(e) becomes the same as that predicted by the Drude model in the spectral region where the layers are transparent. Moreover, according to the present analysis, the volume fractions of the product of the refractive index and the extinction coefficient of the component materials of a binary composite film are additive and the sum equals the product of the effective refractive index and extinction coefficient of the composite film.     

IGP Link Weight Assignment for Operational Tier-1 Backbones

Intradomain routing protocols, such as IS-IS or OSPF, associate a weight (or cost) with each link to compute traffic routes. Proposed methods for selecting link weights largely ignore two practical issues, that of service-level agreement (SLA) requirements and of failures. Optimizing the routing configuration, without bounding the SLA, could severely violate this requirement, which is one of the most important vehicles used by carriers to attract new customers. Since most failures are short-lived, it is much more practical not to have to change weight settings during these episodes. In this paper we propose a tabu-search heuristic for choosing link weights that takes into account both SLA requirements and link failures. Our algorithm selects link weights that still perform well, without having to be changed, even under failure events. To validate the heuristic, we develop a lower bound based on a formal integer linear program (ILP) model, and show that our heuristic solution is within 10% of the optimal ILP lower bound. We study the performance of the heuristic using two operational Tier-1 backbones. Our results illustrate two tradeoffs, between link utilization and the SLA provided, and between performances under failures versus performance without failures. We find that performance under transient failures can be dramatically improved at the expense of a small degradation during normal network operation (i.e., no failures), while simultaneously satisfying SLA requirements. We use our algorithm inside a prototype tool to conduct a case study and illustrate how systematic link weight selection can facilitate topology planning.     

Onset of thermal instability in a horizontal layer of fluid with modulated boundary temperatures

Thermal instability in a horizontal layer of fluid, with the boundary temperatures modulated sinusoidally in time, is studied. The amplitude of modulation is assumed small and is used as an expansion parameter. It is shown that an exact solution can be obtained, even when the boundaries are considered to be rigid. When only the lower boundary temperature is modulated, for small values of the Prandtl number modulation is always stabilizing, while for large values it can be stabilizing or destabilizing depending on the modulation frequency. When both boundary temperatures are modulated in phase, modulation is destabilizing for low modulation frequency, but for higher modulation frequency stabilization occurs for low values of the Prandtl number. When the two boundary temperatures are modulated out of phase the modulation always has a stabilizing effect.     

Radiation-induced graft copolymerization of mixtures of styrene and acrylamide onto cellulose acetate. V. Studies on thermal behavior

The thermal behaviors of cellulose acetate, either grafted or ungrafted, were studied. A thermogram of cellulose acetate when grafted with acrylamide is characterized by an endothermic peak at 340°C. If, however, styrene is grafted, the thermogram shows two characteristic exothermic peaks at 330 and 420°C. A thermogram of the mixed graft comprising both acrylamide and styrene, on the other hand, is characterized by only one exothermic peak at 420°C. A consideration of various thermal data indicates that cellulose acetate when grafted is comparatively more stable than when not grafted. Again, styrene is found to be more effective than acrylamide in increasing the stability.     

Low temperature processing and chacterization of SrBi2Nb2o9 thin films grown by pulsed laser ablation

Abstract

Ex-situ grown thin films of SrBi₂Nb₂O₉ (SBN) were deposited on platinum substrates using laser ablation technique. A low substrate-temperature-processing route was chosen to avoid any diffusion of bismuth into the Pt electrode. It was observed that the as grown films showed an oriented growth along the ′c′-axis (with zero spontaneous polarization). The as grown films were subsequently annealed to enhance crystallization. Upon annealing, these films transformed into a polycrystalline structure, and exhibited excellent ferroelectric properties. The switching was made to be possible by lowering the thickness without losing the electrically insulating behavior of the films. The hysteresis results showed an excellent square-shaped loop with results (P_r = 4 uC/cm²; E_c = 90 kV/cm) in good agreement with the earlier reports. The films also exhibited a dielectric constant of 190 and a dissipation factor of 0.02, which showed dispersion at low frequencies. The frequency dispersion was found to obey Jonscher's universal power law relation, and was attributed to the ionic charge hopping process according to earlier reports. The dc transport studies indicated an ohmic behavior in the low voltage region, while higher voltages induced a bulk space charge and resulted in non-linear current-voltage dependence.     

Overview of the MPEG Reconfigurable Video Coding Framework

Video coding technology in the last 20 years has evolved producing a variety of different and complex algorithms and coding standards. So far the specification of such standards, and of the algorithms that build them, has been done case by case providing monolithic textual and reference software specifications in different forms and programming languages. However, very little attention has been given to provide a specification formalism that explicitly presents common components between standards, and the incremental modifications of such monolithic standards. The MPEG Reconfigurable Video Coding (RVC) framework is a new ISO standard currently under its final stage of standardization, aiming at providing video codec specifications at the level of library components instead of monolithic algorithms. The new concept is to be able to specify a decoder of an existing standard or a completely new configuration that may better satisfy application-specific constraints by selecting standard components from a library of standard coding algorithms. The possibility of dynamic configuration and reconfiguration of codecs also requires new methodologies and new tools for describing the new bitstream syntaxes and the parsers of such new codecs. The RVC framework is based on the usage of a new actor/ dataflow oriented language called CAL for the specification of the standard library and instantiation of the RVC decoder model. This language has been specifically designed for modeling complex signal processing systems. CAL dataflow models expose the intrinsic concurrency of the algorithms by employing the notions of actor programming and dataflow. The paper gives an overview of the concepts and technologies building the standard RVC framework and the non standard tools supporting the RVC model from the instantiation and simulation of the CAL model to software and/or hardware code synthesis.     

Development and study of an automatic AC bridge for impedancemeasurement

An automatic ac bridge method employing the principle of balancing by means of a stochastic gradient search algorithm is presented. Among the various gradient search techniques, the Widrow-Hoff least mean square (LMS) technique has been chosen as it involves a low computational burden. The LMS algorithm has been used by the authors for the operation of an ac bridge operating with continuous variables. The relevant operation has been verified by simulation; it can also measure negative impedance. A relation has been established between parameters to be used in the LMS algorithm for discrete and continuous versions of the bridge. The balance convergence time for a relatively simple form of the LMS bridge, namely, the R-R type bridge, has been theoretically established and experimentally verified both by simulation and real-time implementation. The frequency response of the LMS algorithm has also been determined     

Electromagnetic scattering from a flat plate with rim loading andRAM saving

The problem of electromagnetic scattering from a plate with a rim loading for transverse electric (TE) and transverse magnetic (TM) polarizations is investigated. The analysis is based on the work of R. Tiberio et al. (ibid., vol.AP-33, no.8, p.867-73, 1985) on the uniform geometrical theory of diffraction analysis of a wedge with two face impedances. The two-dimensional field is converted into three-dimensional field using Siegel's 2-D to 3-D conversion formula. The corner effects are neglected. The width of the coating around the edges which gives the same result as a uniformly coated plate of the same size is estimated. Hence, the percentage of saving of radar-absorbing material (RAM) can also be estimated for practical application in radar cross-section (RCS) reduction problems