Pulsed Electrical Stimulation and Surface Charge Induced Cell Growth on Multistage Spark Plasma Sintered Hydroxyapatite‐Barium Titanate Piezobiocomposite

The primary purpose of the present work was to illustrate whether cell proliferation can be enhanced on electroactive bioceramic composite, when the cells are cultured in the presence of external electrical stimulation. The two different aspects of the influence of electric field (E‐field) application toward stimulating the growth/proliferation of bone/connective tissue cells in vitro, (a) intermittent delivery of extremely low strength pulsed electrical stimulation (0.5–4 V/cm, 400 μs DC pulse) and (b) surface charge generated by electrical poling (10 kV/cm) of hydroxyapatite (HA)‐BaTiO₃ piezobiocomposite have been demonstrated. The experimental results establish that the cell growth can be enhanced using the new culture protocol of the intermittent delivery of electrical pulses within a narrow range of stimulation parameters. The optimal E‐field strength for enhanced cellular response for mouse fibroblast L929 and osteogenic cells is in the range of 0.5–1 V/cm. The MTT [3‐(4, 5‐dimethylthiazol‐2‐yl)‐2, 5‐diphenyl tetrazolium bromide] assay results suggested the increased viability of E‐field treated cells over 7 d in culture, implicating the positive impact of electrical pulses on proliferation behavior. The alizarin red assay results showed noticeable increase in Ca‐deposition on the E‐field treated samples in comparison to their untreated counterparts. The negatively charged surfaces of developed piezocomposite stimulated the cell growth in a statistically noticeable manner as compared with the uncharged or positively charged surfaces of similar composition.     

Analysis of Fatty Acid and Lignan Composition of Indian Germplasm of Sesame to Evaluate Their Nutritional Merits

An attempt was made to individually analyze a germplasm collection of 54 indigenous Indian sesame cultivars for fatty acid and lignan composition of their seed oil by gas chromatography and high performance liquid chromatography, respectively. The entries varied in their fatty acid and lignan composition. The mean percentage contents of palmitic, stearic, oleic, linoleic and α‐linolenic acids ranged between 10–22, 5–10, 38–50, 18–43 and less than 1 whereas sesamol, sesamin and sesamolin scored between 3–37, 27–67, 20–59 of the total percentage of lignan, respectively. The highest percentage of α‐linolenic acid (ALA) was obtained in Var‐9 (1.3 % of the total fatty acids). Among the lignans, high sesamin content is considered to be significant, particularly in terms of long shelf life and nutraceutical value of sesame seed oil. The study has broadened our understanding related to differential biochemical composition of the rich sesame germplasms, thereby providing us with a useful groundwork for identifying potential targets and suitable cultivars for genetic engineering approaches to be undertaken in order to improve the nutritional quality of sesame oil, which in turn would be beneficial towards human health.     

Synthesis of SBA 15 graphene oxide composite membrane using phenol–formaldehyde resin pore modifier for CO2 separation

Present study highlights the development of carbon-loaded SBA 15 membrane on clay-alumina tubular support and its performance on the CO₂ separation efficiencies from different mixture gases. To modify the large pores of SBA 15 by graphitic carbon, low molecular weight phenol–formaldehyde (PF) resin was incorporated into the mesoporous channel followed by calcination under inert atmosphere. The modified ordered pore structure of the membrane has been characterized by low-angle XRD, TEM, and pore size distribution analysis. The chemical state of the deposited carbon phase into the SBA 15 pores was analyzed by X-ray photoelectron and Raman spectroscopy. Carbon having graphitic nature mainly in graphene oxide has been deposited into the mesopore of SBA 15 resulting decrease in pore size from 8.9 to 1.0 nm. Finally, the developed SBA 15 carbon membranes were characterized by CO₂ permeation and separation selectivity of CO₂/CH₄, CO₂/CO. Highest CO₂/CH₄ separation factor was achieved as 16.9 with CO₂ permeance 13.6 × 10^–8 mol/m²/s/Pa at 200 kPa feed pressure by the 20% resin with 2 times coated membrane. In flue gas analysis, highest CO₂/CO separation factor of 32.8 was achieved. This study offers an observation on CO₂ separation from simulated BF gas for the first time and the results show the potential of the developed SBA 15/C composite membranes in commercial application.     

Angular absorptance and thermal degradation analysis of TiB2/Ti(B,N)/SiON/SiO2 multilayer solar absorber coating

Multilayer solar selective absorber coatings have been developed in the last few decades. The thermal stability in terms of microstructure gives an insightful understanding of the optical properties of such coatings. In this context, we extensively utilized transmission electron microscopy (TEM) analysis to establish the thermal stability of TiB₂/Ti(B,N)/SiON/SiO₂ coating, under thermal cycling/continuous heating to 500°C in vacuum for 250 h. In particular, this work reports the variation in the solar absorptance of TiB₂/Ti(B,N)/SiON/SiO₂ coating with different angles of incidence of the solar radiation. Extensive analysis using the TEM technique reveals the presence of oxide interlayers that act as diffusion barrier layers to enhance the thermal stability of the coating. Computational simulation using SCOUT software validates the measured reflectance spectrum of the developed multilayer coating. The minor changes in absorptance and emissivity after heat treatment in vacuum at 500°C, together with high solar absorptance over a broad angular variation, establish the potential application of TiB₂/Ti(B,N)/SiON/SiO₂ as a selective coating in concentrated solar power systems.     

Performance Analysis of Ferroelectric GAA MOSFET with Metal Grain Work Function Variability

Silicon - This work represents a unique GAA MOSFET with metal work-function variations (WFVs) and ferroelectric material as dielectric. A random distribution of metal grain (TiN) with grain size...     

Electrophoretic Deposition of Zirconia Thin Film on Nonconducting Substrate for Solid Oxide Fuel Cell Application

Electrophoretic deposition (EPD) of 8 mol% yttria‐stabilized zirconia (YSZ) electrolyte thin film has been carried out onto nonconducting porous NiO‐YSZ cermet anode substrate using a fugitive and electrically conducting polymer interlayer for solid oxide fuel cell (SOFC) application. Such polymer interlayer burnt out during the high‐temperature sintering process (1400°C for 6 h) leaving behind a well adhered, dense, and uniform ceramic YSZ electrolyte film on the top of the porous anode substrate. The EPD kinetics have been studied in depth. It is found that homogeneous and uniform film could be obtained onto the polymer‐coated substrate at an applied voltage of 15 V for 1 min. After the half‐cell (anode + electrolyte) is co‐fired at 1400°C, a suitable cathode composition (La_0.65Sr_0.3MnO₃) thick film paste is screen printed on the top of the sintered YSZ electrolyte. A second stage of sintering of such cathode thick film at 1100°C for 2 h finally yield a single cell SOFC. Such single cell produced a power output of 0.91 W/cm² at 0.7 V when measured at 800°C using hydrogen and oxygen as fuel and oxidant, respectively.     

Development of topical gel containing aceclofenac-crospovidone solid dispersion by “Quality by Design (QbD)” approach

This article describes the development, optimization, and evaluation of Carbopol 940 topical gel containing aceclofenac-crospovidone (1:4) solid dispersion using “Quality by Design (QbD)” approach based on 2³ factorial design. The effect of crospovidone, tri-ethanolamine, and ethyl alcohol amount on the drug permeation profile of the topical gel containing aceclofenac-crospovidone solid dispersion was optimized by 2³ factorial design. The optimized gel showed improved permeation profile with cumulative drug permeation of 26.262 ± 2.157%, and permeation flux of 0.059 ± 0.011 μg/cm²/h. These gels were characterized by pH, viscosity, gel strength and FTIR study. The in vivo anti-inflammatory activity of the optimized gel was evaluated in rats using carrageenan-induced rat-paw oedema model and found excellent anti-inflammatory comparable with a marketed gel without producing any skin irritation.     

Studies on the effect of thiuram disulfide on NR vulcanization accelerated by thiazole-based accelerator systems

Thiuram disulfides form synergistic combinations with thiazole and thiazole-based accelerators, namely, N-cyclohexy-2-benzothiazole sulfenamide (CBS), 2-mercaptobenzothiazole(MBT), and 2-mercaptobenzothiazyl disulfide (MBTS). Unfortunately, widely used thiuram disulfides (TD) generate carcinogenic N-nitrosoamine. It is reported that the nitrosamines from N-methylpiperazine and dibenzylamine are free from this menace. So, some investigations were carried out with the binary combinations of each of bis(N-methylpiperazino)thiuram disulfide (MPTD), tetrabenzylthiuram disulnde (TBzTD), and tetramethyl-thiuram disulfide (TMTD) separately with CBS, MBT, and MBTS. It was observed that all the TD are activated by the CBS, MBT, or MBTS in the combinations studied. The intensity of activation is manifested in the enhancement of torque, modulus, tensile strength, cure rate, hardness, and decrease of elongation at break values and is very much dependent upon the ratio of the accelerators used. Considering the torque, modulus, tensile strength, and the elongation at break values, it apears that MPTD and TBzTD are capable of competing with the hitherto unbeaten TMTD as suitable accelerators for the vulcanization of rubber. Some investigations in respect to heat- and age-resistance behavior have also been carried out and the observed differences in the activities of various binary combinations have been explained through a mechanism. The results obtained with filled vulcanizates indicate that the binary systems comprising TD and MBTS provide fruitful results of which the TBzTD–MBTS combination seems to give the best cure and physical data for practical vulcanizates. © 1996 John Wiley & Sons, Inc.