Diffused junction p+−n solar cells in bulk GaAs—II: Device characterization and modelling

The photovoltaic characteristics of p⁺-n junction solar cells fabricated on bulk GaAs by an open tube diffusion technique are presented in detail. Quantum efficiency measurements were analyzed and compared to computer simulations of the cell structure in order to determine material parameters such as diffusion length, surface recombination velocity and junction depth. From the results obtained it is projected that proper optimization of the cell parameters can increase the efficiency of the cells to close to 20%.     

Exploring the possibilities of using Brazilian subbituminous coals for blast furnace pulverized fuel injection

The current study investigates the combustion and blast furnace injection performance of three Brazilian subbituminous coals (Mina do Recreio) and their beneficiation products using laboratory scale combustion tests. The coals have relative high ash yields (up to 40 wt%) that were reduced stepwise to levels as low as 12 wt%, dry basis. The reduction of ash yields is paralleled by a significant decrease in sulphur and inertinite contents.The combustion tests were performed in a drop tube reactor operating at 1300 °C using two different atmospheres (2.5 and 5% O₂). The chars exhibited preferentially rounded shapes with thick walls and abundant secondary porosity for the 2.5% O₂ chars, whereas the 5% O₂ chars showed very thin walls as a consequence of extensive burnout. The intrinsic reactivities of both set of chars were similar. The differences in conversion between the two working atmospheres were 24-37% and roughly tend to increase with increasing mineral matter content. Conversions as high as 76-81% were reached operating under 5% O₂ indicating that the coals are easy to burn. The small differences in burnout among the coals and their beneficiation products cannot be clearly attributed neither to mineral matter or inertinite content. A rough inverse relationship was found between the intrinsic reactivity of the chars and the inertinite content of the parent coal indicating that the char material derived from inertinite was intrinsically less reactive than that derived from vitrinite. These differences were no longer relevant at high temperature.Blast furnace injection performance was studied through thermobalance experiments using CO₂ atmosphere and 1050 °C temperature. It is apparent that the beneficiation process has no effect on the reactivity of the coals from Recreio Mine. The only exception is the low ash coal-2-LabB (11.5 wt%), for which a higher reactivity is indicated. The reactivity tests show also that the coals have adequate properties to be used together with imported coal blends in pulverized coal injection in the blast furnace (PCI).     

Stability of the intense sweetener neohesperidine DC during yogurt manufacture and storage

The stability of the intense sweetener neohesperidine dihydrochalcone (DC) has been assessed during yogurt manufacture and storage. No significant decomposition was detected during and after milk pasteurization, the fermentation process and storage for 6 weeks at 3 °C. In addition, the maximum authorized concentration of neohesperidine DC did not affect the rate of acidification by lactic acid bacteria during the fermentation process. Taken together, these results suggest that neohesperidine DC can be added to milk products and will remain stable throughout pasteurization and fermentation processes.     

Time Evolution of an AMD-Affected River Chemical Makeup

Acid mine drainage is the main problem encountered by sulphide mining operations, not only because of its ecological aspects, but also because, once it appears, it is very difficult to remediate both technologically and economically. This paper characterises the response of an acid mine drainage-affected channel in the Iberian Pyrite Belt (Southwest of the Iberian Peninsula, Huelva, Spain) to the stimulus of rainfall in its drainage basin by studying the cause–effect relationships between sulphate, iron, copper, zinc, manganese, arsenic and cadmium concentrations in water samples taken at three points and rainfall in the zone.     

Ion-cleaning damage in (100) GaAs,and its effect on schottky diodes

This study investigates the effect of ion cleaning damage of (100) GaAs in the 100–1000 eV range, and also its recovery with thermal annealing to 400°C. It is shown that GaAs could be annealed to a considerable extent if the ion-damage was ? 100 eV. However, full recovery was not achieved. On the other hand, samples damaged at ? 400 eV became progressively worse with annealing. Measurements indicate that these samples are dominated by the effect of arsenic variances within the bulk. These remain in the bulk, but are distributed spatially upon annealing. They behave as deep donors, so that the net electron concentration in the bulk is enhanced. Aluminum-n GaAs Schottky diodes were used as a vehicle for this study.     

Key factors that influence the UX of a dual-player game for the cognitive stimulation and motor rehabilitation of older adults

Universal Access in the Information Society - In this work, the results of usability and user experience (UX) evaluation of a serious video game for the cognitive stimulation and motor...     

Minimizing test-point allocation to improve diagnosability in business process models

Diagnosability analysis aims to determine whether observations available during the execution of a system are sufficient to precisely locate the source of a problem. Previous work deals with the diagnosability problem in contexts such as circuits and systems, but no with the adaptation of the diagnosability problem to business processes. In order to improve the diagnosability, a set of test points needs to be allocated. Therefore, the aim of this contribution is to determine a test-point allocation to obtain sufficient observable data in the dataflow to allow the discrimination of faults for a later diagnosis process. The allocation of test points depends on the strategies of the companies, for this reason we defined two possibilities: to improve the diagnosability of a business process for a fixed number of test points and the minimization of the number of test points for a given level of diagnosability. Both strategies have been implemented in the Test-Point Allocator tool in order to facilitate the integration of the test points in the business process model life cycle. Experimental results indicate that diagnosability of business processes can be improved by allocating test points in an acceptable time.     

Specific recognition of HLA-E, but not classical, HLA class I molecules by soluble CD94/NKG2A and NK cells

The CD94/NKG2 receptors expressed by subpopulations of NK cells and T cells have been implicated as receptors for a broad range of both classical and nonclassical HLA class I molecules. To examine the ligand specificity of CD94/NKG2 proteins, a soluble heterodimeric form of the receptor was produced and used in direct binding studies with cells expressing defined HLA class I/peptide complexes. We confirm that CD94/NKG2A specifically interacts with HLA-E and demonstrate that this interaction is dependent on the association of HLA-E with peptide. Moreover, no interaction between CD94/NKG2A and classical HLA class I molecules was observed, as assayed by direct binding of the soluble receptor or by functional assays using CD94/NKG2A+ NK cells. The role of the peptide associated with HLA-E in the interaction between HLA-E and CD94/NKG2A was also assessed. All class I leader sequence peptides tested bound to HLA-E and were recognized by CD94/NKG2A. However, amino acid variations in class I leader sequences affected the stability of HLA-E. Additionally, not all HLA-E/peptide complexes examined were recognized by CD94/NKG2A. Thus CD94/NKG2A recognition of HLA-E is controlled by peptide at two levels; first, peptide must stabilize HLA-E and promote cell surface expression, and second, the HLA-E/peptide complex must form the ligand for CD94/NKG2A.     

Nonlinear GaAs MESFET modeling using pulsed gate measurements

The effects of traps in GaAs MESFETs are studied using a pulsed gate measurement system. The devices are pulsed into the active region for a short period (typically 1 μs) and are held in the cutoff region for the rest of a 1-ms period. While the devices are on, the drain current is sampled and a series of pulsed gate I-V curves are obtained. The drain current obtained under the pulsed gate conditions for a given V_GS and V_DS gives a better representation of the instantaneous current for a corresponding V_gs and V_ds in the microwave cycle because of the effects of traps. The static and pulsed gate curves were used in a nonlinear time-domain model to predict harmonic current. The results showed that analysis using pulsed gate curves yielded better predictions of harmonic distortion than analysis based on conventional state I-V curves under large-signal conditions