Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

论网络升级方式与光纤选择的关系

在重点说明影响传输光纤设计的主要问题的同时，简要介绍了各种升级方式所面临的主要技术挑战，并详细说明这些挑战对传输光纤提出的技术要求。     

The morphology of rigid-rod polymers and molecular composites resulting from coagulation processing

The effects of processing conditions on the morphology of molecular composite films are examined by optical and electron microscopy. During coagulation processing from solutions in methanesulfonic acid (MSA), rigid-rod polymer, such as poly(p-phenylenebenzobisoxazole) (PBO), phase separates into undesirable aggregates. The coagulant and the method of its introduction have been found to exert a strong impact on the final film morphology. A quench of a PBO solution in MSA into a water bath results in a three dimensional interconnected network of PBO, while a slower introduction of water results in a more amorphous material. A computer simulation program of the coagulation process has been developed to better understand the different structures emerging from coagulation processing of molecular composites. The simulation results are in qualitative agreement with the experimental observations.     

SOLUBILISATION OF NITROGENOUS CONSTITUENTS OF BREWERS' SPENT GRAIN

The extraction of nitrogenous material from Brewers' spent grain (BSG) by solvents (water, sodium chloride solution, aqueous alcohol, acidic and alkaline solutions) commonly used to extract cereal proteins, resulted in the relatively low (0·2 to 8·5%) recovery of the total nitrogen. The recovery of nitrogenous material by the use of aqueous alkaline solutions was increased from 3–4% to 41% when the BSG was subjected to cellulase incubation prior to extraction. Approximately 75% of the nitrogen was solubilized with trifluoracetic acid. Detergent solutions (acid, neutral) solubilized more than 80% of the total nitrogen of the BSG. The low solubility of the nitrogenous constituents by conventional protein solvents could be the result of association between cellulosic material and protein.     

Detection of West Nile virus by the polymerase chain reaction and analysis of nucleotide sequence variation

A polymerase chain reaction (PCR) assay was developed to rapidly detect and identify West Nile (WN) virus. The RNA from seven isolates of WN virus from six countries and four other flaviviruses (Kunjin, Japanese encephalitis, St. Louis encephalitis, and yellow fever viruses) was reverse-transcribed (RT) and amplified by PCR. The nucleotide sequences of the amplified products were determined by a rapid, automated DNA sequencing method. The WN virus RT/PCR assay detected the target gene segment of sequencing method. The WN virus RT/PCR assay detected the target gene segment of isolates from both the African-Middle Eastern group and the Indian group with a sensitivity of approximately 0.05 pg of viral RNA. Kunjin virus was the only other flavivirus tested that produced a band of the appropriate size. Five of seven WN virus isolates showed 92-98% homology in the nucleotide sequence of their PCR products. The sequence of one isolate was virtually identical to the published sequence of the Nigerian isolate (99.5% homology). No correlation was established between the degree of nucleotide homology, geographic location, time of isolation, or source of the isolates.     

Actions speak no louder than words: Symmetrical cross-modal interference effects in the processing of verbal and gestural information.

Five experiments are reported that investigate the distribution of selective attention to verbal and nonverbal components of an utterance when conflicting information exists in these channels. A Stroop-type interference paradigm is adopted in which attributes from the verbal and nonverbal dimensions are placed into conflict. Static directional (deictic) gestures and corresponding spoken and written words show symmetrical interference (Experiments 1, 2, and 3), as do directional arrows and spoken words (Experiment 4). This symmetry is maintained when the task is switched from a manual keypress to a verbal naming response (Experiment 5), suggesting the mutual influence of the 2 dimensions is independent of spatial stimulus-response compatibility. It is concluded that the results are consistent with a model of interference in which information from pointing gestures and speech is integrated prior to the response selection stage of processing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Tower of London performance in relation to Magnetic Resonance Imaging following closed head injury in children.

To investigate the relationship of severity of pediatric closed head injury (CHI), the contribution of frontal lobe lesions, and age at testing (6–10 yr olds vs 11–15 yr olds) to cognitive deficit, 134 head-injured patients were given the Tower of London (TOL) task and underwent magnetic resonance imaging. 89 normal controls were given the TOL for comparison. Severity of CHI and age at testing were strongly related to cognitive performance on the TOL, including the frequency of breaking the rules. Volume of frontal lobe lesion (but not extrafrontal lesion) contributed to the prediction of perfomance on the TOL even after severity of injury was taken into account. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Elimination of extra spring effect at the step-up anchor ofsurface-micromachined structure

This paper describes the concept, analysis, fabrication, and testing of a new anchor for surface-micromachined beams. The anchor is designed to eliminate the extra spring effect at the step-up anchor common in conventional surface-micromachined beams, so that the boundary condition follows the ideal anchoring condition more accurately. The idea is to form a reinforcement hump at the beam anchor through a minor modification in the sacrificial-layer mask. No modification in the fabrication process is necessary. Formation of the reinforcement hump is tested using the multiuser MEMS Process (MUMP) foundry service at the Microelectronics Center of North Carolina (MCNC). The effectiveness of the new anchor is analyzed by finite-element analysis based on the actual anchor geometry obtained from the fabrication directly. Experimental verification is provided by making overhanging microcantilever pairs, one with the new anchor and the other with conventional, through MUMP's and postprocessing and comparing their frequency responses. Small-signal frequency response measurements are made with a modified Michaelson interferometer. Resonant frequency of a 2-μm-thick 300-μm-long polysilicon cantilever with the new anchor differed by less than 0.1% from the ideal anchor case. In comparison, the resonant frequency of the same beam with a conventional anchor is off by over 1%     

Process-based cost modeling of photonics manufacture: the cost competitiveness of monolithic integration of a 1550-nm DFB laser and an electroabsorptive modulator on an InP platform

The monolithic integration of components holds promise to increase network functionality and reduce packaging expense. Integration also drives down yield due to manufacturing complexity and the compounding of failures across devices. Consensus is lacking on the economically preferred extent of integration. Previous studies on the cost feasibility of integration have used high-level estimation methods. This study instead focuses on accurate-to-industry detail, basing a process-based cost model of device manufacture on data collected from 20 firms across the optoelectronics supply chain. The model presented allows for the definition of process organization, including testing, as well as processing conditions, operational characteristics, and level of automation at each step. This study focuses on the cost implications of integration of a 1550-nm DFB laser with an electroabsorptive modulator on an InP platform. Results show the monolithically integrated design to be more cost competitive over discrete component options regardless of production scale. Dominant cost drivers are packaging, testing, and assembly. Leveraging the technical detail underlying model projections, component alignment, bonding, and metal-organic chemical vapor deposition (MOCVD) are identified as processes where technical improvements are most critical to lowering costs. Such results should encourage exploration of the cost advantages of further integration and focus cost-driven technology development.