Nitrification parameter measurement for plant design: experience and experimental issues with new methods.

Nitrification kinetics are important for process design, optimization, and capacity rating of activated sludge wastewater treatment plants. A Water Environment Research Foundation (WERF) project on Methods for Wastewater Characterization in Activated Sludge Modeling (WERF, 2003) focused significantly on the development of procedures for measuring the nitrifier maximum specific growth rate, micro(AUT). In addition, the importance of (and lack of data for) the nitrifier decay rate, b(AUT), was identified. This paper describes three bench-scale methods for measuring micro(AUT): the Low F/M SBR, Washout and High F/M methods. During the WERF project, the importance of pH and temperature control was investigated briefly; this paper summarizes further experimental work performed to address these issues. A summary of micro(AUT) measurements in a number of locations and using the different measurement techniques is provided.     

The impact of agricultural management practices on nutrient losses to water: data on the effects of soil drainage characteristics.

Against the background of increasing nutrient concentrations in Irish water bodies, this study set out to gain information on the potential of agricultural grassland to lose nutrients to water. Overland flow, flow from artificial subsurface drains and stream flow were gauged and sampled during heavy rainfall events. Dissolved reactive phosphorus (DRP), potassium (K), total ammonia (TA), and total oxidised nitrogen (TON) were measured in water samples. When the nutrient concentrations in water were examined in relation to the grassland management practices of the study catchments it emerged that soil P levels, the application of organic and inorganic fertilisers before heavy rainfall and the presence of grazing animals could all influence nutrient concentrations in surface and subsurface drainage water. Overall, the drainage characteristics of soil were found to have a considerable influence on the potential of land to lose nutrients to water.     

Precautionary information-generation in science and the law.

An information-generation system should be part of precautionary approaches to protecting the public's health and the environment. Such a system would include inventories or surveys of health and the environment, monitoring of them, as well as scoping out or scouting for threats or other harmful things that could occur and providing sentinels to try to identify threats before they materialize. I, then, suggest some ways in which such strategies could be adopted in science and the law as part of a precautionary approach. Doing more to generate information in an anticipatory way will assist implementation of the precautionary principle and help remove some of the uncertainty in environmental and public health protections.     

Anomalous splitting in microwave mode-beating spectra of semiconductor ring lasers

Mode-beating spectra are investigated in long-perimeter (1.028 cm) monolithically integrated multiple-quantum-well semiconductor ring lasers. The beating line near 8 GHz is found to be split into two components. With increasing pumping current, a normal component shifts to lower frequencies, while an anomalous higher-frequency component shifts in the opposite direction. It is suggested the anomalous blue-shifting line results from power-induced perturbation of the refractive index in the vicinity of a strong mode.     

Dual Gabor frames: theory and computational aspects

We consider a general method for constructing dual Gabor elements different from the canonical dual. Our approach is based on combining two Gabor frames such that the generated frame-type operator S/sub g,/spl gamma// is nonsingular. We provide necessary and sufficient conditions on the Gabor window functions g and /spl gamma/ such that S/sub g,/spl gamma// is nonsingular for rational oversampling, considering both the continuous-time and the discrete-time settings. In contrast to the frame operator, the operator S/sub g,/spl gamma// is, in general, not positive. Therefore, all results in Gabor analysis that are based on the positivity of the frame operator cannot be applied directly. The advantage of the proposed characterization is that the algebraic system for computing the Gabor dual elements preserves the high structure of usual Gabor frames, leading to computationally efficient algorithms. In particular, we consider examples in which both the condition number and the computational complexity in computing the proposed dual Gabor elements decrease in comparison to the canonical dual Gabor elements.     

Automated estimation of rock fragment distributions using computer vision and its application in mining

Size distribution of rock fragments obtained from blasting and crushing in the mining industry has to be monitored for optimal control of a variety of processes before reaching the final grinding, milling and the froth flotation processes. Whenever feasible, mechanical sieving is the routine procedure to determine the cumulative rock weight distribution on conveyor belts or free falling off the end of transfer chutes. This process is tedious and very time consuming, even more so if a complete set of sieving meshes is used. A computer vision technique is proposed based on a series of segmentation, filtering and morphological operations specially designed to determine rock fragment sizes from digital images. The final step uses an area-based approach to estimate rock volumes. This segmentation technique was implemented and results of cumulative rock volume distributions obtained from this approach were compared to the mechanical fragment distributions. The technique yielded rock distribution curves which represents an alternative to the mechanical sieving distributions.     

Study of direct and indirect naphtha recycling to a resid FCC unit for maximum propylene production

To satisfy the increasing propylene demand, direct and indirect naphtha recycling schemes around an existing resid fluid catalytic cracking (FCC) unit were investigated. To this aim, light cracked naphtha (LCN), heavy cracked naphtha (HCN) and a PolyNaphtha (PN) oligomerisation product were cracked under a wide range of operating conditions over a commercial Y zeolite based equilibrium catalyst. Experimental data were acquired in three different units: a fixed bed bench scale unit, a fixed fluidised bed unit and an adiabatic circulating fluidised bed pilot plant. It was shown that FCC naphthas require high operating severities to crack, and that even then their conversion remains relatively moderate. Hence, direct recycling to the main riser does not seem a viable pathway to increase propylene product. Feeding FCC naphthas to a second reaction zone operating at high severity allows to increase the propylene yield in a significant manner. Increasing conversion, however, not only leads to higher LPG and propylene yields, but also results in very high dry gas yields. An alternative scheme was proposed, in which the olefinic C₄ and C₅ fractions are converted into a naphtha fraction through oligomerisation in a dedicated unit before being recracked in the secondary riser. As the highly olefinic oligomerised effluent mainly consist of dimerised and trimerised butenes and pentenes, this feed is more easily cracked and high conversions can be achieved. This indirect interconversion of butenes and pentenes into propylene therefore effectively allows to convert these butenes and pentenes into propylene, resulting in a significant increase in propylene yield. Each of the three main naphtha recycle options (directly to the main riser, directly to a secondary riser or indirectly via a light olefin oligomerisation unit) have been analysed and compared to a base case. In the evaluation of each of these schemes, all heat balance effects, both on the riser and the regenerator side, have been accounted for. The proposed process scheme with an indirect recycle via an oligomerisation unit enhances the already inherent flexibility of the FCC unit. The naphtha recycle can be turned on or off, the second reaction zone can be used to crack naphtha or to crack resid feed to maximise throughput, while the effluent of the oligomerisation unit can be recycled to the FCC unit for propylene production or hydrogenated and sent to gasoline and kerosene pool.     

Estimation of fouling in a plate heat exchanger through the application of neural networks

Pasteurization is an important, if not the most important, process step in the packaging of milk. It is subject to alterations stemming from the variation in the temperature, pH and raw milk quality. The variability may manifest itself in changes in the formation of the deposit (fouling) in the pasteurization unit, such that there is a need for tools, both instrumentation and computational, to help in monitoring the process and keeping it on the desired course. In this paper we describe a practical procedure based on artificial neural networks (ANN) that allows prediction of the deposit thickness, the overall heat transfer coefficient and the critical time (the time that the unit has to be stopped for cleaning) for reducing the impact of fouling on such processes. The procedure determines when the cleaning operation is required once the system is under critical conditions of operations. A combination of fundamental studies and plant measurements were used for study of the operating conditions and thus evaluation of the trades‐offs between operating conditions and longer operating life span. The results are encouraging, enough to validate current operating industrial techniques. Copyright © 2005 Society of Chemical Industry     

On the capacity of mobile ad hoc networks with delay constraints

Previous work on ad hoc network capacity has focused primarily on source-destination throughput requirements for different models and transmission scenarios, with an emphasis on delay tolerant applications. In such problems, network capacity enhancement is achieved as a tradeoff with transmission delay. In this paper, the capacity of ad hoc networks supporting delay sensitive traffic is studied. First, a general framework is . proposed for characterizing the interactions between the physical and the network layer in an ad hoc network. Then, CDMA ad hoc networks, in which advanced signal processing techniques such as multiuser detection are relied upon to enhance the user capacity, are analyzed. The network capacity is characterized using a combination of geometric arguments and large scale analysis, for several network scenarios employing matched filters, decorrelators and minimum-mean-square-error receivers. Insight into the network performance for finite systems is also provided by means of simulations. Both analysis and simulations show a significant network capacity gain for ad hoc networks employing multiuser detectors, compared with those using matched filter receivers, as well as very good performance even under tight delay and transmission power requirements.     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.