Infrastructure IP for configuration and test of boards and systems

Embedding infrastructure IP to optimize chip-level manufacturing test and debugging has recently become common practice. However, adopting the same approach for boards and systems requires a different family of infrastructure IP. This article introduces such a family and discusses how it can optimize manufacturing test and debugging, as well as support configurability, especially in today's reconfigurable products.     

二甲基甲酰胺溶剂回收装置焦油塔减压改造方案

实验研究了纯二甲基甲酰胺(DMF)水溶液和焦油塔进料在不同减压压力条件下的水解变化规律,确定了焦油塔减压操作的适宜操作压力和减压操作方案。     

Experimental and analytical studies of innovative prestressed concrete box-girder bridges

This paper presents experimental and analytical results of four scaled prestressed concrete box-girder bridges with corrugated steel webs. The location of prestressing strands at both ends of the specimens and the thickness of end diaphragms are the two major parameters. Based on the experimental results of all four specimens, their seismic behavior is critically examined, including hysteretic loops, ductility factor, dissipated energy, and failure mode, etc. It was found that both the thickness of end diaphragms and the location of prestressing strands at both ends of the specimens are insignificant when the specimens failed at the mid-span due to concrete crushing, and the proposed analytical model can be used to predict the load-displacement relationship of such bridges.     

Convergence of simultaneous perturbation stochastic approximation for nondifferentiable optimization

We consider simultaneous perturbation stochastic approximation for function minimization. The standard assumption for convergence is that the function be three times differentiable, although weaker assumptions have been used for special cases. However, all work that we are aware of at least requires differentiability. We relax the differentiability requirement and prove convergence using convex analysis.     

广泛应用机器人技术是提高连铸安全性的重要步骤

1前言及历史背景 为避免钢水造成燃烧或破碎引起对人体的可能伤害,必须对连铸平台的平面布置进行分析.     

Electronic Transport in Ultrathin Gold Films on Si(111)

The morphology and electronic transport of ultrathin Au films with thicknesses d = 1 ? 5 monolayers (ML) deposited on Si(111)7 × 7 surfaces is investigated by in situ scanning tunneling microscopy and electrical resistance measurements for temperatures T = 2 ? 300 K. With decreasing film thickness, i.e. decreasing sheet conductance G_s, a transition from a weakly conducting regime described by a logarithmic temperature dependence to an insulating regime occurs. In the insulating regime, the temperature dependence is described by G_s ∝ exp[?(T ₀ /T) ⁿ] with an exponent n which gradually changes from 0.69 to 1 with decreasing film thickness. In contrast, for the Si(111)6 × 6-Au reconstruction obtained after annealing, an exponent n = 1/2 is found suggesting the formation of a soft Coulomb gap due to electron-electron interaction. PACS numbers: 68.37.-d, 68.55.-a, 73.50.-h, 73.25.+i, 81.15.-z     

On the energy impact of four information delivery methods in wireless sensor networks

A lot of researches are devoted to energy-save solutions in wireless sensor networks, to face their critical limited energy budget. In this paper we propose four information delivery mechanisms and we compare their relative energy impact, in order to make communications both reliable and energetic efficient. We present a parametric model to choose the best solution with respect to the great amount of factors that influence system performance, e.g., the hardware technology, the source to destination distance, the number of hops involved. For actual sensor nodes (/spl mu/AMPS-1) we are able to guarantee a whole delivery strategy with an energy gain ranging from 5% to 15% with respect to the trivial hop-to-hop decoding one.     

A Family of Far‐Infrared‐Transmitting Glasses in the Ga–Ge–Te System for Space Applications

Conditions of formation of bulk tellurium chalcogenide glasses, containing 70–80 at % Te associated to Ga and Ge are described. The characteristic temperatures are measured: the glass‐transition temperature, T_g, is situated in the range 140–185 °C and the difference T_x – T_g, where T_x is the onset crystallization temperature, is in the range 76–113 °C. Moreover, the optical transmission window is exceptional, ranging from 1.99 μm in the bandgap up to 28 μm in the phonon region. Developed within the framework of requirements for the Darwin mission (a search for and study of extrasolar planets), feasibility of infrared optical fibers formed from these glasses is studied. Drawing experiments are conducted with the glass Ga₂‐Ge₃Te₁₅, which possesses the maximum T_x – T_g, and a first optical fiber is presented.     

Effects of reducing and oxidizing atmospheres on the PTCR characteristics of porous n-BaTiO3 ceramics by adding polyethylene glycol

Donor doped BaTiO₃ (n-BaTiO₃) ceramics were fabricated by adding polyethylene glycol (PEG) at 20 wt %. The effects of reducing and oxidizing atmospheres on the PTCR characteristics of the porous n-BaTiO₃ ceramics were investigated. The PTCR characteristics of the porous n-BaTiO₃ ceramics is strongly affected by chemisorbed oxygen at the grain boundaries and are recovered as the atmosphere is changed from the reducing gas to oxidizing gas. The low room-temperature resistivity of the porous n-BaTiO₃ ceramics in reducing atmospheres may be caused by the decrease in potential barrier height, which originates from an increase in the number of electrons owing to the desorption of chemisorbed oxygen atoms at the grain boundaries. In addition, the high room-temperature resistivity of the porous n-BaTiO₃ ceramics in oxidizing atmospheres may be caused by the increase in potential barrier height, which results from the adsorption of chemisorbed oxygen atoms at the grain boundaries.