Seven-pinhole tomography of the thyroid

In this paper we introduce a new application of the sevenpinhole (7P) collimator: tomographic imaging of the thyroid. The collimator design has been reoptimized for this particular application by diminishing the distance from the collimator plate to the crystal and by choosing a smaller pinhole diameter. To reconstruct thyroid images from the two-dimensional projection data we use a method which we developed for 7P tomographic imaging of the heart [1]. Phantom experiments and patient studies demonstrate that this new device is capable of producing tomographic images of good quality and high resolution. Therefore, it seems to offer a promising alternative to conventional planar imaging of the thyroid (using a single-pinhole collimator).     

Thermal studies of Cr2O3 doped CaCO3-SiO2 (2∶1) system

Mixtures of CaCO₃SiO₂ in 21 molar ratio were subjected separated to thermal analysis with varying concentration of Cr₂O₃ (0.1 to 5%) as dopant. The activation energy (E _a) and enthalpy (H) shows a decreasing trend with 0.1 to 1% Cr₂O₃ and attains a minimum value with 1% dopant. 0.1 to 0.5% Cr₂O₃ helps in the formation of and C₂S, (Cement Chemistry notations, C = CaO, S = SiO₂) phases at 1400° C and above but 1% Cr₂O₃ stabilizes -C₂S phase along with a little free lime and CaCrO₄. A small quantity of CaCrO₄, Cr₂SiO₂ and -C₂S are also formed along with the major phases with 5% Cr₂O₃ indicating that Cr³⁺ can substitute both Ca²⁺ and Si⁴⁺ ions in the C₂S lattice.     

Effect of nitrogen and nickel on the stability of an Fe-12Cr-23Mn austenitic steel

The effect of nitrogen and nickel on the austenite stability and the structural changes as a result of cold work of an Fe-12Cr-23Mn alloy steel has been examined by transmission electron microscopy and X-ray analysis. Prestrain was performed either at room temperature or at 200° C. Final strain was carried out at liquid nitrogen temperature. The volume fraction of strain-induced martensite decreased by 40% and 12% due to the addition of 2.43% Ni and 0.11% N, respectively, despite whether prestrain was performed or not. The mechanisms are discussed in terms of the phase, stacking faults, dislocation cells and dislocation tangles induced by prestrain and final strain.