Electrical Properties of GeO2–NiO Materials Containing Ni2GeO4

The GeO₂–NiO system is studied in the stability range of Ni₂GeO₄ by temperature-dependent resistivity measurements, in combination with x-ray diffraction, differential thermal analysis, and thermogravimetry. The resistivity of the starting mixtures and heat-treated samples is measured in the composition range 55–90 mol % NiO. The effect of air humidity on the resistivity of the samples is examined.     

A multigrid accelerated hybrid unstructured mesh method for 3D compressible turbulent flow

 A cell vertex finite volume method for the solution of steady compressible turbulent flow problems on unstructured hybrid meshes of tetrahedra, prisms, pyramids and hexahedra is described. These hybrid meshes are constructed by firstly discretising the computational domain using tetrahedral elements and then by merging certain tetrahedra. A one equation turbulence model is employed and the solution of the steady flow equations is obtained by explicit relaxation. The solution process is accelerated by the addition of a multigrid method, in which the coarse meshes are generated by agglomeration, and by parallelisation. The approach is shown to be effective for the simulation of a number of 3D flows of current practical interest. Sponsored by The Research Council of Norway, project number 125676/410 Dedicated to the memory of Prof. Mike Crisfield, a respected colleague     

Catalytic aminolysis of epoxide by alumina prepared from amine-protected Al precursor

The catalytic activities of alumina prepared from an Al alkoxide-amine adduct monomer for the reaction of cyclopentene oxide with piperidine was determined after various pretreatments, including calcination and exposure to moisture. They were compared with the activity of alumina prepared by the conventional hydrolysis method. It was found that the as-prepared sample from the alkoxide-amine monomer preparation was five times more active than a conventional preparation, suggesting that it has a higher density of surface Lewis acid sites. However, its activity was much more severely suppressed by exposure to moisture.     

Nonlinearity analysis and optimization of HBTs for optical mixer designs

Two types of photo heterojunction bipolar transistor (HBT) to directly down-convert optical signals to electronic signals have been reported in the literature: a conventional photo-HBT in which light penetrates through the area of the base-collector junction and an HBT where light shines through the base-collector edge for higher conversion efficiency. Although the performance in relation to bias conditions has been published, the detailed analyses for identifying the parameters and bias conditions that provide optimum direct down-conversion have not been examined. This paper provides a full explanation of the operation of the down-conversion for both HBT configurations based on low-frequency analyses. Such information is useful for both understanding the nonlinear mechanisms involved and designing for maximum efficiency. In addition, a new circuit has been developed from the basic HBT down-conversion circuit that provides improved performance.     

Radiometric sensor for temperature control of food processing

This paper describes a novel planar antenna sensor created for the purpose of noninvasive temperature measurements using microwave radiometry. In order to improve radiometric measurements in industrial applications, a new generation of sensors is introduced, composed of a metallic sheet. Simulations based upon the method of moments is used both to design and to determine their electromagnetic performances. This paper also describes a radiometric device using these sensors to measure and control the temperature of food products during deep freezing processes. The results and discussions are presented.     

Sequential Spectrum Analysis of the Sideband Components of Digital Amplitude-Modulated Signals

It is shown that, for the spectrum analysis of digital quasi-periodic signals, one must use a procedure based on approximating the sequence of data readouts by a first-order trigonometric polynomial with a varying frequency of its harmonic functions.     

The Shunting of Current and the Resultant Variation of Voltage in Channels of Plasmatrons with Self-Adjusting Length of Electric Arc

The characteristics of pulsation processes in dc plasmatrons with the cathode located in the channel center and the anode in the form of a cylindrical or a conical channel wall are investigated in plasmas of argon and nitrogen at atmospheric pressure. The fast Fourier transform of signals and their subsequent computer processing are used to obtain the dependences of the frequency of fluctuations of the arcing voltage on the working parameters of the plasmatron, namely, the electric arc current, the flow rate of plasma-forming gas, and the channel diameter. For plasmatrons with the self-adjusting length of the electric arc, analysis is performed of the mechanism of reclosing of the anode region of the arc, i.e., of the electric arc shunting associated with the stretching of the current filament by a flow of gas and with the electrodynamic interaction of different filament regions. A formula is derived which defines the dependence of the characteristic frequency of fluctuations of the arcing voltage on the external parameters of the problem, namely, the arc current, the flow rate of the working gas, and the characteristic channel diameter. It is demonstrated that the pattern of the dependence of the frequency of voltage fluctuations on the gas flow rate may vary with the values of the parameter of magnetohydrodynamic interaction. The formula generalizes the experimental results of numerous researchers obtained in a wide range of variation of the external parameters.