Theoretical analysis of fiber motion and loads during flow

A pseudo-analytical model for the forces exerted on fibers during flow that lead to fiber damage is proposed and solved. The fundamental derivations for the forces on fibers moving in suspensions developed by Burgers (1938) were used as a comparison. The cases of the motion of a fiber along its axis and perpendicular to its axis and in shear flow at a −45 degree-angle were investigated for aspect ratios between 10 and 300. The values for the overall forces on the fiber were in good agreement with the results found earlier by Burgers and others. However, the force distribution along the fiber was found to be significantly different from the constant distribution assumed by Burgers. Because of the higher forces on the fiber from the exact solution, the criterion for the onset of buckling in shear flow was revised. The pseudo-analytical solution was also compared to numerical results done with the boundary element method (BEM); the results were in good agreement.     

Use of surfactants and blends to remove DDT from contaminated soils

Removal of dichloro‐diphenyl‐trichloroethane (DDT) from soils using surfactant‐enhanced solubilisation was studied both in batch and continuous flow arrangements to determine if there were advantages to using a combination of non‐ionic (Tween and Brij) and anionic surfactants. It was observed that the presence of the anionic surfactant sodium dodecyl benzene sulphonate improved the DDT removal efficiency, but had a potentially negative effect on flow rates in column leaching experiments at concentrations over 0.1%. The potential for re‐use of the surfactant mixture was studied and demonstrated by removing DDT and its metabolites from the surfactant solution using activated carbon. © 2011 Canadian Society for Chemical Engineering     

Influence of the amorphous phase molecular mobility on impact and tensile properties of polyamide 6,6

In this work, the relationship between molecular mobility of polyamide 6,6 amorphous phase and mechanical properties is studied. PA66 formulations having different glass transition temperatures (T_g) obtained by additivation, chemical modification of the polyamide chains, and/or water conditioning at different hygrometry levels, are considered. The main emphasis is put on the impact strength, as measured by instrumented Charpy impact tests over a broad temperature range. It is observed that the brittle‐tough transition temperature T_B/T is closely correlated with the T_g of the samples rather than to the β secondary relaxation. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43457.     

A fully bio-based monomer derived from undecylenic acid,glycerol, and CO2 useful for the synthesis of polyhydroxyurethanes

Undecylenic acid, glycerol, and CO₂ were used as building blocks for obtaining a fully bio-based carbonated monomer, useful for polyurethanes. The functionality of the monomer was close to 3 cyclic carbonates/mol, located in terminal positions. In a first stage, a synthetic triglyceride was obtained with 99% selectivity by esterification of glycerol and undecylenic acid at 160°C. The triglyceride was then epoxidized using H₂O₂ and Amberlyst 15 or Amberlite IR-120 acidic exchange resins at 57°C. The selectivity to epoxide was kept constant at 98% using Amberlite IR-120. Terminal cyclic carbonates were then inserted through epoxide moieties under mild conditions by the chemical fixation of CO₂ at 80°C and 6 MPa in 6 h. A complete conversion was obtained in 6 h reaction while the selectivity to carbonate groups was near to 99% during all the reaction time. An elastomeric polyhydroxyurethane was obtained by aminolysis of the carbonated monomer with ethylenediamine at 70°C, affording a Young's modulus of 22.6 MPa and T_g of −15.2°C. The material showed a good thermal stability below 240°C.     

A comprehensive study of the loss of enzyme activity in a continuous membrane reactor – application to starch hydrolysis

Loss of enzyme activity is a problem associated with enzymatic reactions in continuous recycled membrane reactors (CRMR). It may result from catalyst leakage and also enzyme denaturation due to the effects of pH, temperature, shear effects or adsorption/deposit on membrane. In this study, the relative importance of these various factors has been assessed in order to reduce their adverse effects on starch hydrolysis in a CRMR. The effects of temperature and denaturation by adsorption/deposit on membrane were the most limiting phenomena. Reducing the temperature to overcome thermal denaturation was not a practical solution since this increases viscosity and thereby decreases permeate flux and reactor performance. Insofar that adsorption/deposit of enzymes on the membrane is directly linked to membrane fouling, back‐flushing or regularly purging retentate should reduce this phenomenon by lowering accumulation of high molecular weight products. © 2001 Society of Chemical Industry     

Pinoresinol and 1-acetoxypinoresinol, two new phenolic compounds identified in olive oil

Polyphenols of olive oil show autoprotective, sensory, and nutritional-therapeutic effects. Two new phenolic compounds have been isolated from virgin olive oils by preparative high-performance liquid chromatography and their structures established on the basis of their mass spectra and nuclear magnetic resonance spectral data. The compounds identified are the lignans pinoresinol and 1-acetoxypinoresinol. Both have been found in all the commercial virgin olive oils analyzed. Pinoresinol concentration was rather similar in all the oils. In contrast, 1-acetoxypinoresinol concentration was higher in oils of the Arbequina and Empeltre cultivars than in Picual or Picudo cultivars. Pinoresinol and 1-acetoxypinoresinol may represent the major phenolic compounds in some Arbequina and Empeltre oils. Lignans possess biological and pharmacological properties and, therefore, the two new compounds identified in olive oils may contribute to the reported beneficial effects which are attributed to polyphenols on human health of a diet rich in olive oil.     

TP53 in Acute Myeloid Leukemia: Molecular Aspects and Patterns of Mutation

Mutation of the tumor suppressor gene, TP53, is associated with abysmal survival outcomes in acute myeloid leukemia (AML). Although it is the most commonly mutated gene in cancer, its occurrence is observed in only 5–10% of de novo AML, and in 30% of therapy related AML (t-AML). TP53 mutation serves as a prognostic marker of poor response to standard-of-care chemotherapy, particularly in t-AML and AML with complex cytogenetics. In light of a poor response to traditional chemotherapy and only a modest improvement in outcome with hypomethylation-based interventions, allogenic stem cell transplant is routinely recommended in these cases, albeit with a response that is often short lived. Despite being frequently mutated across the cancer spectrum, progress and enthusiasm for the development of p53 targeted therapeutic interventions is lacking and to date there is no approved drug that mitigates the effects of TP53 mutation. There is a mounting body of evidence indicating that p53 mutants differ in functionality and form from typical AML cases and subsequently display inconsistent responses to therapy at the cellular level. Understanding this pathobiological activity is imperative to the development of effective therapeutic strategies. This review aims to provide a comprehensive understanding of the effects of TP53 on the hematopoietic system, to describe its varying degree of functionality in tumor suppression, and to illustrate the need for the adoption of personalized therapeutic strategies to target distinct classes of the p53 mutation in AML management.     

LLDPE with Exclusively Ethyl Branches by Tandem Catalysis with Single-Site Zr(IV)/Co(II) Catalysts

Semicrystalline linear low density polyethylenes (LLDPEs) with exclusively ethyl branching (from 7 to 56 branches per 1,000 carbon atoms) were prepared from ethylene by homogeneous tandem catalytic systems comprising (imino)pyridine cobalt(II) dichlorides as oligomerization precursors, bis(cyclopentadienyl)zirconium(IV) dichloride as copolymerization precursor and methyaluminoxane as activator. The activity of the tandem systems was evaluated by varying either the molar fraction of the cobalt precursors or the ethylene pressure. The latter parameter was of crucial importance to control both the productivity and the extent of 1-butene incorporation. In particular, increasing the ethylene pressure from 2 bar to 4 bar changed the “comonomer effect” from positive to negative.     

Highly Diastereo‐ and Enantioselective Catalytic Domino Thia‐Michael/Aldol Reactions: Synthesis of Benzothiopyrans with Three Contiguous Stereocenters

Highly enantioselective organocatalytic domino thia‐Michael/aldol reactions between 2‐mercaptoacetophenone and α,β‐unsaturated aldehydes are presented. The reactions proceed with excellent chemo‐, diastereo‐ and enantioselectivity to give the corresponding benzothiopyran derivatives in high yields with up to >15:1 dr and 96 to >99 % ee.