Application of K2CO3 catalysts in the coal gasification process using nuclear heat

Conventional gasification processes use coal not only as feedstock to be gasified but also for supply of energy for reaction heat, steam production, and other purposes. With a nuclear high temperature reactor (HTR) as a source for process heat, it is possible to transform the whole of the coal feed into gas. This concept offers advantages over existing gasification processes: saving of coal, as more gas can be produced from coal; less emission of pollutants, as the HTR is used for the production of steam and electricity instead of a coal-fired boiler; and a lower production cost for the gas. However, the process has the disadvantage that the temperature is limited to the outlet temperature (950 °C max) of the helium cooling gas of the HTR. Therefore the possibility of catalytic steam gasification was examined. Model calculations based on experimental results show that use of 3–4 wt% relative to coal of K²CO³ catalyst increases the throughput of a large scale nuclear gasification plant by ≈65%, while gas production costs decrease by ≈15%. Corrosion by catalysts is not significant at low concentration (< 5 wt%) and low temperature (< 900 °C).     

Ion-dipole interactions between adsorbed CO and support cations in Pt/K-LTL

The adsorption of carbon monoxide on a non-acidic Pt/K-LTL catalyst has been studied by diffuse reflectance and transmission IR spectroscopy. The CO spectrum is strongly dependent on the experimental conditions. Adsorption on the small Pt clusters in the presence of water gives linear-CO bands between 2060 and 1990 cm^–1 and a bridging-CO band around 1800 cm^–1. In the absence of water, the linear bands are red shifted to about 1940 and 1720 cm^–1, respectively. The frequency shift is attributed to an ion-dipole interaction between adsorbed CO and support cations. The ion-dipole interaction is screened by the adsorbed water leading to a smaller red shift in the CO stretching frequency.     

Intrinsic reactivity of gold nanoparticles: Classical, semi-empirical and DFT studies

Gold nanoparticles used in most experiments (1–10 nm) in gold catalysis show varying degrees of reactivity, with particles below 5 nm generally being more reactive. The origin of this activity is a subject of a number of model experiments and theoretical studies on either clusters of a few atoms in size or extended surfaces (smooth or stepped). In the work described here, a classical theory for the variation of the metal workfunction with cluster size, Extended Hückel Theory (EHT) calculations combined with DFT calculations, as well as a carbon monoxide (CO) chemisorption model are combined to develop a relationship between metal particle size and the particle's reactivity towards CO. For gold, it is shown that while the contribution of the d-band hybridization energy to the total CO chemisorption energy is unfavourable for bulk gold, this is not true for gold particles below 5–6 nm. That is, the d-band hybridization energy is negative for small gold particles. This is believed to be explanation of the onset of high reactivity for small gold particles.     

Opportunities for public water utilities in the market of energy from water

An inventory is made of the possibilities to recover sustainable energy from the water cycle by identifying different water flows in a municipal environment as a sustainable energy source. It is discussed what role public water utilities should play in the market of energy from water. This is done for Waternet, the public water utility of Amsterdam, by describing experiences on two practical applications for aquifer thermal energy storage and energy recovery from drinking water. The main conclusion is that public water utilities can substantially contribute to the production of sustainable energy, especially by making use of heat and cold from the water cycle. Public water utilities have the opportunity to both regulate and enter the market for energy from water.     

Delineating Boundaries for Imprecise Regions

In geographic information retrieval, queries often name geographic regions that do not have a well-defined boundary, such as “Southern France.” We provide two algorithmic approaches to the problem of computing reasonable boundaries of such regions based on data points that have evidence indicating that they lie either inside or outside the region. Our problem formulation leads to a number of subproblems related to red-blue point separation and minimum-perimeter polygons, many of which we solve algorithmically. We give experimental results from our implementation and a comparison of the two approaches. This research is supported by the EU-IST Project No. IST-2001-35047 (SPIRIT) and by grant WO 758/4-2 of the German Research Foundation (DFG).     

Supervisory control of modular systems with global specification languages

The paper presents sufficient conditions for modular (supervisory) control synthesis to equal global control synthesis. In modular control synthesis a supervisory control is synthesized for each module separately and the supervisory control consists of the parallel composition of the modular supervisory controls. The general case of the specification that is indecomposable and not necessarily contained in the plant language, which is often the case in practice, is considered. The usual assumption that all shared events are controllable is relaxed by introducing two new structural conditions relying on the global mutual controllability condition. The novel concept used as a sufficient structural condition is strong global mutual controllability. The main result uses a weaker condition called global mutual controllability together with local consistency of the specification. An example illustrates the approach.     

Renal proliferative and phenotypic changes in rats with two-kidney, one-clip Goldblatt hypertension

Previous research in this laboratory has shown that preweaning and postweaning juvenile meadow voles, Microtus pennsylvanicus, can acquire a spatial task, the Morris water-maze task. The present study examined the influence of age of juvenile acquisition ("before weaning" (BW; Day 10 and 15 after birth) and "after weaning" (AW; Day 20 and 25 after birth)) of a spatial task on subsequent re-acquisition of the same hidden-platform spatial water-maze task. This study also compared sex differences and litter sex-ratio effects on reacquisition performance. Fifteen litters of adults were re-tested in the same water maze 6 weeks after being initially tested as juveniles. All analyses were conducted using a covariate that removed the group differences in the original task performance. Adult voles from female-biased litters, that had previously learned the task at an older juvenile age (AW), reacquired the same task faster than adults that had previously learned the task at a younger juvenile age (BW). In the adult BW group there was also a significant litter sex-ratio effect such that voles born into a female-biased litter re-acquired the task more slowly than did voles born into a male-biased litter. There were no significant sex or litter sex-ratio effects on spatial learning in the AW group. These results show that adult meadow voles can require a spatial task more quickly if they initially learned the task at an older juvenile age, suggestive of a period of infantile amnesia. In addition, these results indicate that the litter sex-ratio can affect adult spatial performance, suggesting that the relative amount of androgens in utero may influence the development of sexually-dimorphic spatial ability in adulthood.     

Nonintrusive measurements of temperature and size of single falling raindrops

A nonintrusive laser technique, based on the detection of a rainbow, is presented that permits one to determine simultaneously the temperature and size of droplets. Therefore the Airy theory for a rainbow and a calibration rainbow pattern at isothermal conditions are applied. Rainbow patterns coming from droplets in the millimeter range have been recorded on a linear CCD array. It has been found that the sphericity of the droplets plays an important role for this rainbow-based technique.     

Microbiological survey of a South African poultry processing plant

Bacterial populations associated with poultry processing were determined on neck skin samples, equipment surfaces and environmental samples by replicate surveys. Aerobic plate counts, Enterobacteriaceae counts, Enterobacteriaceae counts and Pseudomonas counts were performed by standard procedures and the prevalence of Listeria, presumptive Salmonella and Staphylococcus aureus determined. Statistically significant (P < 0.05) increases in counts of all types of bacteria were obtained on product samples as a result of processing. Although bacterial counts on neck skin samples decreased by 0.3 to 0.4 log CFU g-1 after spray washing of carcasses, subsequent spinchilling and packaging of whole carcasses resulted in 0.7 to 1.2 log CFU g-1 increases. Bacterial numbers on equipment surfaces, however, decreased significantly from the "dirty" to the "clean" areas of the abattoir. Transport cages, "rubber fingers", defeathering curtains, shackles and conveyor belts repeatedly showed aerobic plate counts in excess of 5.0 log CFU 25 cm-2. Aerobic plate counts of scald tank and spinchiller water were 2 log CFU ml-1 higher than those of potable water samples. Bacterial numbers of the air in the "dirty" area were higher than those of the "clean" area. Listeria, presumptive Salmonella and Staphylococcus aureus were isolated from 27.6, 51.7 and 24.1% of all product samples, respectively, and Listeria and Staphylococcus aureus were also isolated from selected equipment surfaces.