Carbon fibre cloth as an electrode material: electrical conductivity and mass transfer

The paper deals with carbon fibre cloth electrodes, employed in the fabrication of composite materials. The electrical conductivity of single bundles, groups of bundles and cloth is studied. Ohm's law applies to the electrical conduction in the direction of the fibre length, but bundle conductivity decreases with the number of fibres in the bundle. Electrochemical mass transfer between a flowing electrolyte and a cloth arranged as a flow-through or a flow-by porous electrode indicates the existence of double porosity in the material. Due to double porosity, only the external surface of the cloth works as an electrode. This finding shows that the material is not suitable for such an application.     

Left ventricular outflow tract obstruction after mitral valve replacement

A method of posterior mitral annulus remodeling is presented. The posterior annulus is divided into three segments, each segment encircled by a suture that is passed in a tourniquet. Coaptation of the leaflets can be achieved by tightening the tourniquets while the ventricle is being filled. This technique is simple and quick, avoids the use of foreign material, and requires less expertise and judgment than traditional annuloplasties.     

Evaluation of different methods of catching anopheline mosquitoes in western Venezuela

During a longitudinal study of vector biology and malaria transmission in western Venezuela, adult mosquitoes were collected by different methods and their efficiency was compared with human landing catches. CDC light traps, a double-net, a calf-baited trap and collection of resting mosquitoes on vegetation were tested. These methods did not prove to be effective substitutes for human landing catches.     

Molecular cloning and nucleotide sequencing of a novel aminoglycoside 6'-N-acetyltransferase gene from an R-plasmid of Salmonella typhimurium S24 isolated in Taiwan

A conjugative aminoglycoside resistance plasmid pST2 has been isolated from Escherichia coli K-12 14R525, which was mated with a clinical isolate of Salmonella typhimurium S24. A novel resistance gene of aminoglycoside 6'-N-acetyltransferase[AAC(6')] was cloned from plasmid pST2 on a 1,393 kilobase (kb) of SphI-SalI fragment into vector pACYC184 and pUC18. This novel AAC(6') gene in plasmid pST2 acetylated kanamycin, amikacin, dibekacin, tobramycin, gentamicin, netilmicin, and sisomicin. The complete nucleotide sequence of the novel AAC(6') gene and its neighboring sequences were also determined. Minicell experiments detected only one protein of 24.7 kilodaltons (kDa) translated from an open reading frame of the 618 base pairs (bp) gene.     

The dependence of stress induced voiding on line width studied by conventional and high resolution resistance measurements

The degradation due to stress induced voiding of nitride passivated Al-1 wt.% Si and Ti/TN/ Al-1wt.% Si-0.5 wt. % Cu/Ti/TN interconnects with widths ranging between 0.4 and 1.2 μm was studied by in-situ conventional high resolution resistance measurements (HRRM) during storage at temperatures between 168 and 240°C. The conventional measurements on Al-Si lines, which lasted more than one year, clearly showed that the interconnect lifetime decreases with decreasing line width. With HRRM the degradation due to stress induced voiding can be detected much sooner and with much more detail. From the HRRM it is clear that the resistance changes during storage often happen in jumps and that the degradation has a rather complex alloy, line width and temperature dependence. Both for 0.4 and 0.6 μm wide Al---Si lines more degradation occurred for storage at 175 °C compared to storage at 200 °C. For the Al---Si---Cu stacks the degradation of 0.4 μm wide lines was worse for storage at 240°C compared to storage at 200 °C, but the opposite was true for the 0.6 μm wide lines.     

Electrical Characterization of p-Type Pb1−x Eu x Te

The transport properties of p-type Pb_1?x Eu _x Te epitaxial layers were studied as a function of Eu content, temperature, and magnetic field. The low-temperature hole mobility is drastically reduced when the Eu concentration is increased from 0 to 6%, while the hole concentration remains almost constant. A metal-insulator transition was observed for x ≈ 0.04, which is probably induced by the disorder caused by the introduction of Eu. For temperatures down to 10 K, only positive magnetoresistance has been observed at low magnetic fields. An anomalous behavior of the resistivity as a function of temperature has been detected for a Eu content about 5%, which is attributed to the resonance between the localized Eu 4f level and the valence band maximum.     

乙醇电氧化的研究进展

简要地叙述了国内外乙醇电催化氧化的研究进展，着重介绍不同电极材料对乙醇电氧化的影响及目前所提山的机理，并对其可能的研究方向提出了建议。     

Background memory area estimation for multidimensional signalprocessing systems

Memory cost is responsible for a large amount of the chip and/or board area of customized video and image processing system realizations. In this paper, we present a novel technique-founded on data-flow analysis which allows one to address the problem of background memory size evaluation for a given nonprocedural algorithm specification, operating on multidimensional signals with affine indexes. Most of the target applications are characterized by a huge number of signals, so a new polyhedral data-flow model operating on groups of scalar signals is proposed. These groups are obtained by a novel analytical partitioning technique, allowing to select a desired granularity, depending on the application complexity. The method incorporates a way to tradeoff memory size with computational and controller complexity     

A study of ionic defects in modified lead titanate ceramics

Pb_1–x Ca _x [(Co_0.5W_0.5)_0·05Ti_0.95]O₃ ceramics with x = 0.24, 0.30 and 0.35, are prepared by a solid state reaction of oxides. Deviations from nominal chemical compositions and formation of segregated phases different from modified lead titanate perovskites, are studied. Pyro- and non-pyroelectric currents excited in the material by a thermal wave are investigated and related to mobility of electrical charges in the materials.