Determination of mechanical properties of Al–Mg alloys dissimilar friction stir welded interface by indentation methods

A series of friction stir welds was produced between heat treated Al–Mg–Si and strain hardened Mg–Al–Zn alloy sheets. Weld evaluation by transverse tensile testing showed a wide range of strengths and all the failures occurred along the weld interface. The formation of intermetallic compounds in the weld joints was investigated by X-ray diffraction, scanning electron microscopy imaging, and elemental analysis techniques. Micro and nanoindentation characterization methods were used to evaluate the mechanical properties at the interface, including the fracture toughness. The fracture toughness measurements by a Vickers indenter introduced Palmqvist type cracks at all four corners of the indents and cube corner indenter resulted in the intermetallic chipping. The fracture toughness (K _IC) calculation by both the micro and nanoindentation methods showed very low values, which is the primary reason for the brittle failure of the dissimilar weld joints and concomitant low tensile strengths.     

Similarity between class A and class B G-protein-coupled receptors exemplified through calcitonin gene-related peptide receptor modelling and mutagenesis studies

Modelling class B G-protein-coupled receptors (GPCRs) using class A GPCR structural templates is difficult due to lack of homology. The plant GPCR, GCR1, has homology to both class A and class B GPCRs. We have used this to generate a class A–class B alignment, and by incorporating maximum lagged correlation of entropy and hydrophobicity into a consensus score, we have been able to align receptor transmembrane regions. We have applied this analysis to generate active and inactive homology models of the class B calcitonin gene-related peptide (CGRP) receptor, and have supported it with site-directed mutagenesis data using 122 CGRP receptor residues and 144 published mutagenesis results on other class B GPCRs. The variation of sequence variability with structure, the analysis of polarity violations, the alignment of group-conserved residues and the mutagenesis results at 27 key positions were particularly informative in distinguishing between the proposed and plausible alternative alignments. Furthermore, we have been able to associate the key molecular features of the class B GPCR signalling machinery with their class A counterparts for the first time. These include the [K/R]KLH motif in intracellular loop 1, [I/L]xxxL and KxxK at the intracellular end of TM5 and TM6, the NPXXY/VAVLY motif on TM7 and small group-conserved residues in TM1, TM2, TM3 and TM7. The equivalent of the class A DRY motif is proposed to involve Arg^2.39, His^2.43 and Glu^3.46, which makes a polar lock with T^6.37. These alignments and models provide useful tools for understanding class B GPCR function.     

A new technique to derive particle size distributions and aerosol number concentrations directly from thermophoretic data

The manufacture of many high value-added powders takes place by the decomposition of gaseous precursors in aerosol tube reactors. Historically, process improvements were achieved by making changes on the outside of the reactor and observing what comes out at the end of the pipe. The development of increasingly accurate aerosol dynamics models based on engineering first principles has been limited because models were typically validated on integral properties of ex situ product, instead of particle properties measured at multiple positions inside the reactor. In this study, a model reactor was equipped to capture samples thermophoretically from 15 internal positions. Additional in-line measurements were achieved with a multi-stage inertial impactor and by traditional analysis of ex situ product. Calculations were performed to verify that thermophoresis was the dominant mechanism of particle capture. The thermophoretic samples were analyzed by electron beam microscopy and image analysis to develop particle size distributions at each of the internal positions inside the reactor. An approximation of Talbot's Equation for thermophoretic velocity allowed experimental measurements to be combined with thermophoretic sample data to give predictions of particle number concentration corresponding to the precise sampling locations. The combinations of particle size distributions and number concentrations provide powerful insights on particle nucleation and growth dynamics.     

TRANSIENT THERMOELASTIC FRACTURE OF INTERFACE CRACKS

Abstract

The transient behavior of an interface crack at the center and edge of two finite dissimilar materials free to bend and subjected to a transient thermal load was studied. It was first assumed that the crack was insulated. The effect of allowing heat to conduct through the crack upon closing was also investigated. The effects of the mechanical and thermal material property ratios as well as the thickness ratio on the crack deformations and the transient strain energy release rate were calculated.     

Effect of communication media on developmental relationships: Self-reported and observed behaviors

This study examined the effect of four communication modes (computer-based video teleconferencing, computer-based electronic chat, telephone, and face-to-face) on developmental interactions between dyads; specifically on the transmission of psychosocial versus instrumental information. The dyads consisted of undergraduates at a southeastern university. One member of the dyad was an incoming first year student; the second member was an upper division student who served as a developmental coach. The study was experimental in design, which controlled the amount of interaction, the frequency of interaction, and prior acquaintanceship of the dyadic pair. The small amount of variance attributable to communication mode suggests that people matter more than the machines. Specifically, in terms of implementing non-face-to-face developmental programs, it might be more useful to focus on reducing the variability in the coaches’ behaviors through selection or training, than to focus on communication mode. Additionally, independent observers watched and rated the dyadic interactions to provide a third point of view. There was very little overlap between coach and trainee perceptions, although there was considerable agreement between the raters’ and coaches’ ratings.     

Size-dependent absorption and defect states in CdSe nanocrystals in various multilayer structures

GeS2-CdSe superlattices and composite films are prepared by consecutive thermal evaporation of CdSe and GeS2 in vacuum. CdSe layer thickness varies between 1 and 10 nm, while the thickness of GeS2 layers is either equal (in superlattices) to or 20 times greater (in composite films) than that of CdSe layers. Standard spectral photocurrent measurements and various constant photocurrent methods are used to study optical absorption of all samples. An overall blueshift is observed with decreasing CdSe layer thickness of superlattices. This shift is related to a size-induced increase of the optical band gap of CdSe due to one-dimensional carrier confinement in the continuous nanocrystalline CdSe layers. A number of features are observed in the absorption spectra of composite films containing CdSe nanocrystals with average radii of approximately 2.5 and approximately 3.3 nm. They are discussed in terms of three-dimensional carrier confinement and are considered a manifestation of excited electron states in CdSe nanocrystals embedded in GeS2 thin film matrix. In addition to these discrete features, the exponential dependence of the optical absorption (Urbach) edge indicates a distribution of "valence band" tail states associated with disorder. Transient photoconductivity measurements made on similarly prepared SiOx-CdSe superlattices exhibit a rapid fall in photocurrent by a power law decay over several orders of magnitude of time, which is consistent with multi-pletrapping transport via an extensive distribution of deep defects.     

Timely Timelessness: Traditional Proportions and Modern Practice in Kahn’s Kimbell Museum

The twentieth century witnessed declining interest in architectural proportioning systems, which were virtually eclipsed by technical, social and fiscal agendas. Louis Kahn is a seminal architect, whose most acclaimed building, the Kimbell Art Museum (1966–72), represents a compelling case-study in the use proportions by twentieth-century architects. In spite of a raft of peculiarly modern restrictions (both technological and programmatic), Kahn appears – despite his espoused ambivalence concerning proportion – to have intentionally produced a building with an array of approximate geometrical as well as precise harmonic proportions. This two-part paper presents the findings of a multifaceted research project that examined the Kimbell’s proportions from numerous standpoints. Part 1 presents a textural analysis of Kahn’s statements regarding proportion, as well as the findings of an archival study of correspondence between the architect and his client and consultants. Part 2 presents a prima facie geometrical analysis of the construction drawings for the project. The division into parts reflects an apparent discrepancy between Kahn’s buildings and what he had to say about them.     

Neighborhood effects in reading aloud: New findings and new challenges for computational models.

A word from a dense neighborhood is often read aloud faster than a word from a sparse neighborhood. This advantage is usually attributed to orthography, but orthographic and phonological neighbors are typically confounded. Two experiments investigated the effect of neighborhood density on reading aloud when phonological density was varied while orthographic density was held constant, and vice versa. A phonological neighborhood effect was observed, but not an orthographic one. These results are inconsistent with the predominant role ascribed to orthographic neighbors in accounts of visual word recognition and reading aloud. Consistent with this interpretation, 6 different computational models of reading aloud failed to simulate this pattern of results. The results of the present experiments thus provide a new understanding of some of the processes underlying reading aloud, and new challenges for computational models. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

A scalable manufacturing process for flexible active‐matrix e‐paper displays

Abstract— A scalable manufacturing process for fabricating active‐matrix backplanes on low‐cost flexible substrates, a key enabler for electronic‐paper displays, is presented. This process is based on solution processing, ink‐jet printing, and laser patterning. A multilayer architecture is employed to enable high aperture ratio and array performance. These backplanes were combined with E Ink electrophoretic media to create high‐performance displays that have high contrast, are bistable, and can be flexed repeatedly to a radius of curvature of 5 mm.     

A fluorescence-based method for determining the surface coverage and hybridization efficiency of thiol-capped oligonucleotides bound to gold thin films and nanoparticles

Using a fluorescence-based method, we have determined the number of thiol-derivatized single-stranded oligonucleotides bound to gold nanoparticles and their extent of hybridization with complementary oligonucleotides in solution. Oligonucleotide surface coverages of hexanethiol 12-mer oligonucleotides on gold nanoparticles (34 +/- 1 pmol/cm2) were significantly higher than on planar gold thin films (18 +/- 3 pmol/cm2), while the percentage of hybridizable strands on the gold nanoparticles (1.3 +/- 0.3 pmol/cm2, 4%) was lower than for gold thin films (6 +/- 2 pmol/cm2, 33%). A gradual increase in electrolyte concentration over the course of oligonucleotide deposition significantly increases surface coverage and consequently particle stability. In addition, oligonucleotide spacer sequences improve the hybridization efficiency of oligonucleotide-modified nanoparticles from approximately 4 to 44%. The surface coverage of recognition strands can be tailored using coadsorbed diluent oligonucleotides. This provides a means of indirectly controlling the average number of hybridized strands per nanoparticle. The work presented here has important implications with regard to understanding interactions between modified oligonucleotides and metal nanoparticles, as well as optimizing the sensitivity of gold nanoparticle-based oligonucleotide detection methods.