Crystalline morphology and isothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites

A poly(ethylene terephthalate) (PET)/montmorillonite clay nanocomposite was synthesized via in situ polymerization. Microscopic studies revealed that in an isothermal crystallization process, some crystallites in the nanocomposite initially were rod‐shaped and later exhibited three‐dimensional growth. The crystallites in the nanocomposite were irregularly shaped, rather than spherulitic, being interlocked together without clear boundaries, and they were much smaller than those of neat PET. With Avrami analysis, the isothermal crystallization kinetic parameters (the Avrami exponent and constant) were obtained. The rate constants for the nanocomposite demonstrated that clay could greatly increase the crystallization rate of PET. The results for the Avrami exponent were consistent with the observation of the rodlike crystallites in the PET/clay nanocomposite during the initial stage. Wide‐angle X‐ray scattering and Fourier transform infrared studies showed that, in comparison with neat PET, the crystal lattice parameters and crystallinity of the nanocomposite did not change significantly, whereas more defects may have been present in the crystalline regions of the nanocomposite because of the presence of the clay. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1381–1388, 2004     

Effect of calcination temperature on the characteristics of SO<Emphasis Type="Italic">sk</Emphasis>4/2-/TiO<Subscript>2</Subscript> catalysts for the reduction of NO by NH<Subscript>3</Subscript>

The catalytic activity of sulfated titania (ST) calcined at a variety of temperatures has been investigated for selective catalytic reduction (SCR) of NO by NH₃. The NO removal activity of ST catalyst mainly depends on its sulfur content, indicating critical role of sulfur species on the surface of TiO₂. The role of sulfur is mainly the formation of acid sites on the catalyst surface. The presence of both BrØnsted and Lewis acid sites on the surface of sulfated titania has been identified by IR study with the adsorption of NH₃ and pyridine on ST. The reduction of the intensity of IR bands representing BrØsted acid sites is more pronounced than that revealing Lewis acid sites as the calcination temperature increases. It has been further clarified by IR study of ST500 catalyst evacuated at a variety of temperatures. The NO removal activity also decreases with the increase of the catalyst calcination temperature. It simply reveals that BrØnsted acid sites induced by sulfate on the catalyst surface are primarily responsible for the enhancement of catalytic activity of ST catalyst containing sulfur for NO reduction by NH₃.     

Separation of crude palm oil components by semipreparative supercritical fluid chromatography

Successful separation of triglycerides, diglycerides, free fatty acids, carotenes, tocopherol, and tocotrienols from crude palm oil has been achieved by supercritical fluid chromatography (SFC) with a combination of a C18 and a silica gel column. The separation was carried out by the programmed extraction elution method. Free fatty acids were separated into five components by gas-liquid chromatography; tocopherol and tocotrienols were also separated into four components by SFC analysis, and the pure fractionated carotenes were obtained by preparative SFC. Thus, by using supercritical fluid chromatography, crude palm oil components can be separated and fractionated, based on differences in their functional groups.     

液态金属快速结晶的热力学驱动力

采用超高真空无容器悬浮熔炼技术使液态Ｆｅ和Ｎｉ的过冷度分别达２００和２３５Ｋ，借助量热法测定出其比热各为４８．６和４０．５Ｊ·ｍｏｌ~（－１）·Ｋ~（－１）．据此精确计算出深过冷Ｆｅ和Ｎｉ快速结晶的热力学驱动力△Ｇ_（ＬＳ），并与Ｔｕｒｎｂｕｌｌ模型和Ｄｕｂｅｙ－Ｒａｍａｃｈａｎｄｒａｒａｏ模型的近似计算结果相比较，发现这两种近似模型在过冷度超过１００Ｋ时均产生大于１％的偏差．进一步分析发现，△Ｇ_（ＬＳ）的计算偏差对深过冷液态金属中晶体形核率的影响极大，因此快速凝固研究中应尽可能精确计算△Ｇ_（ＬＳ）．     

Influences of Ta, Nb, or Mo additions in Zr-based bulk metallic glasses on microstructure and thermal properties

The master-alloy ingots for casting bulk metallic glasses are routinely prepared by arc melting a mixture of pure elements. This paper addresses the difficulty in achieving complete and homogeneous melting of refractory component additions in Zr-based BMGs using the above procedure, and its influences on the microstructure and thermal behavior of alloys.     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

Automatic generation and refinement of hypertext links

Abstract

Current generation of hypertext systems suffer from the limitations that they are static in nature, and they do not support the automated process of link creation very well. Because of the efforts involved in manually creating links, the hyperbases created using these systems are seldom modified even when they were found not to fully support the requirements of the intended users. This paper studies the development of automated tools to aid in the process of link creation, browsing, and link refinement. Only relation links are considered in this study. The automated tools are developed to help in three of the major stages of developing and using hypertext applications: (a) during authoring to generate a set of relation links between pairs of nodes; (b) during browsing to recommend an optimal set of starting nodes for the users to begin browsing, and to guide the users at each stage of browsing by suggesting a set of “next” nodes to traverse; and, (c) during training to modify, remove and add links based on users' feedback data collected. The training will result in long-term changes in the hypertext structure.

In order to test the effectiveness of the training process objectively, a navigator is built to simulate the browsing activities of the users. The effects of training have been evaluated on two text collections using a variety of objective measures. The results indicate that the training process has improved the effectiveness of the hyperbase to support browsing.     

Performance enhancement of TCP in high-speed networks

GridFTP is a secure and reliable high-performance parallel data transfer protocol used for transferring massive amounts of widely distributed data. Currently it allows users to configure the number of parallel streams and socket buffer size. However, its tuning procedure for optimal combination is a time consuming task. The socket handlers and buffers are important system resources and must therefore be carefully managed. In this paper, we propose a scheme to achieve high throughput even with a smaller buffer size, and also derive a regression equation to predict the optimal combination of resources for a connection. To improve the performance, the TCP based on our scheme obtains higher throughput and spends less memory for the same throughput than the original TCP scheme. In addition, the regression equation is verified by comparing measured and predicted values, and we apply the equation to an actual experiment on the KOrea advanced REsearch Network (KOREN). The result demonstrates that the equation provides excellent predictions with only an 8% error boundary.     

Perfect forward secure identity-based authenticated key agreement protocol in the escrow mode

The majority of existing escrowable identity-based key agreement protocols only provide partial forward secrecy. Such protocols are, arguably, not suitable for many real-word applications, as the latter tends to require a stronger sense of forward secrecy—perfect forward secrecy. In this paper, we propose an efficient perfect forward-secure identity-based key agreement protocol in the escrow mode. We prove the security of our protocol in the random oracle model, assuming the intractability of the Gap Biline...     

Artificial intelligence in cyber security: research advances,challenges, and opportunities

Artificial Intelligence Review - In recent times, there have been attempts to leverage artificial intelligence (AI) techniques in a broad range of cyber security applications. Therefore, this paper...