扭摆式微硅隧道加速度传感器

本文介绍了扭摆式隧道加速度传感器的结构、工作原理、简化的力学模型,设计了版图、工艺流程及关键工艺,并制备出样品,最后给出测试电路和结果。     

Optimized centre-feed clarifier design for the Tai Po Sewage Treatment Works,Hong Kong

Stability of sludge blanket is a critical factor controlling the performance of clarifiers. A three-dimensional computational fluid dynamics (CFD) model was applied to optimize the clarifier design at the Tai Po Sewage Treatment Works, Hong Kong. Validated by field data, the CFD model evaluated the key clarifier design elements including side-water depth, centre-feed inlet, flocculation well and returned activated sludge (RAS) flow. Based on field observations and modelling results, the new design aims at eliminating the strong turbulence typical of centre-feed inlets in the clarifier, thus creating a better flocculation environment, and reducing disturbance to the sludge blanket. The modelling results also demonstrated a marked improvement in clarifier performance after the increase in clarifier depth and hence sludge storage capacity. The increased storage capacity reduces the risk of high sludge blanket levels upsetting the clarified effluent quality under high flow or solids loading conditions.     

Probabilistic prediction of high cycle fatigue reliability of high strength steel butt‐welded joints

The aim of this paper is to develop a probabilistic approach of high cycle fatigue (HCF) behaviour prediction of welded joints taking into account the surface modifications induced by welding and the post‐welding shot peening treatment. In this work, the HCF Crossland criterion has been used and adopted to the case of welded and shot peened welded parts, by taking into account the surface modifications which are classified as follows: (i) the compressive residual stresses, (ii) the surface work‐hardening, (iii) the geometrical irregularities and (iv) the superficial defects. The random effects due to the dispersions of: (i) the HCF Crossland criterion material characteristics (ii) the applied loading and (iii) the surface modifications parameters are introduced in the proposed model. The HCF reliability has been computed by using the ‘strength load’ method with Monte Carlo simulation. The reliability computation results lead to obtain interesting and useful iso‐probabilistic Crossland diagrams (PCD) for different welding and shot peening surface conditions. To validate the proposed method, the approach has been applied to a butt‐welded joint made of S550MC high strength steel (HSS). Four types of specimens are investigated: (i) base metal (BM), (ii) machined and grooved (MG) condition, (iii) As welded (AW) condition and (iv) as welded and shot peened (AWSP) condition. The comparison between the computed reliabilities and the experimental investigations reveals good agreement leading to validate the proposed approach. The effects of the different welded and post‐weld shot peened specimen's surface properties are analysed and discussed using the design of experiments (DoE) techniques.     

Test consideration for nanometer-scale CMOS circuits

The exponential increase in leakage, the device parameter variations, and the aggressive power management techniques will severely impact IC testing methods. Test technology faces new challenges as faults with increasingly complex behavior become predominant. Design approaches aimed at fixing some of the undesirable effects of nanometric technologies could jeopardize current test approaches. In this article, we explore test considerations for scaled CMOS circuits in the nanometer regime and describe possible solutions to many of these challenges, including statistical timing and delay test, I/sub DDQ/ test under exponentially increasing leakage, and power or thermal management architectures.     

传统中药现代化--中药健康食品的开发

传统中药是现代生活健康的宝库,其功效在保健及慢性疾病的治疗方面尤其显著,并已备受世界重视.要成功将中药引进世界市场,最基本要求是要从科学方法去证明其效用及安全性;更重要是依从传统中医学对复方应用的要求去作研究.本文陈述了我们对传统中药古方"生脉散"研究及开发抗氧化健康食品的经验.透过现代生化及药理技术,我们发现"生脉散"中的五味子含丰富的抗氧化活性成分,为传统中医学利用"生脉散"治疗心脏病提供了理论依据.     

Congenital abnormalities in Brazilian children associated with misoprostol misuse in first trimester of pregnancy

BACKGROUND: Misoprostol is commonly used to induce abortion in Brazil, and in other countries in South and Central America where abortions are illegal. However, misoprostol is not very effective in inducing abortions, and exposure to the drug in utero can cause abnormalities in the fetus. We aimed to define the common phenotypical effects of exposure to the drug. METHODS: We studied 42 infants from S?o Paulo, Brazil, who were exposed to misoprostol during the first 3 months of gestation, and then born with congenital abnormalities. We interviewed each of the infants' mothers to find out about misoprostol exposure and dosage. Each infant was physically examined by a geneticist or a neuropaediatrician. FINDINGS: 17 of the infants had equinovarus with cranial-nerve defects. Ten children had equinovarus as part of more extensive arthrogryposis. The most distinctive phenotypes were arthrogryposis confined to the legs (five cases) and terminal transverse-limb defects (nine cases) with or without Mobius sequence. The most common dose of misoprostol taken was 800 microg (range 200-16000 microg). INTERPRETATION: Deformities attributed to vascular disruption were found in these children. We suggest that the uterine contractions induced by misoprostol cause vascular disruption in the fetus, including brain-stem ischaemia. Information on the effects of taking misoprostol during pregnancy should be made more widely available, to dissuade women from misusing the drug.