Past is prologue: Teachers composing narratives about digital literacy

This study examines the technological literacy autobiographical narratives (TLANs) written by 23 graduate students enrolled in a teacher-preparation course, Teaching Writing in a Digital Age. The purpose of this research was to understand the meanings and values these future composition teachers ascribed to technological literacy in their own past histories, as well as potential sources of reluctance or resistance to engage technological literacy in the teaching of composition. Findings from these TLANs suggest that participants’ past experiences with technology in school were often less compelling than extracurricular motives for using technology, such as social contact, playful experimentation, and the pursuit of existing interests. The article also explores the TLAN as a pedagogical activity and its potential for helping future instructors realign their orientations toward digital literacies.     

Effect of Synthesis Technique and Carbonate Content on the Crystallinity and Morphology of Carbonated Hydroxyapatite

The syntheses of nanosized carbonated hydroxyapatite（CHA） were performed by comparing dropwise and direct pouring of acetone solution of Ca（N0₃）₂-4H₂0 into mixture of（NH₄）₂HP0₄ and NH₄HCO₃ at room temperature controlled at pH 11.Direct pouring method was later applied to study the increment of carbonate content in syntheses.The as-synthesized powders were characterized by various characterization techniques.The crystallographic results of the produced powders were obtained from X-ray diffraction analysis,whilst the carbonate content in the produced powders was determined by the CHNS/O elemental analyzer.Fourier transform infrared analysis confirmed that the CHA powders formed were B-type.Field emission scanning electron microscopy revealed that the powders were highly agglomerated in nanosized range and hence energy filtered transmission electron microscopy was employed to show elongated particles which decreased with increasing carbonate content.     

Design of a double microprocessor‐based on‐line process control system

Abstract

A numerical technique for integrating the full Navier‐Stokes and diffusion equations through an initial value problem has been used to investigate the time development of a line buoyant source issuing in a density‐stratified environment. The basic physical features and some structures of the interactions of the motion at the intermediate mixing region are obtained. Results show that the stratification tends to inhibit the flow development of the buoyant source and to encourage the formation of a recirculatory vortex on the lower region near the source and the upper region.     

Interactive Mixture as a Rapid Drug Delivery System

The effectiveness of an interactive mixture as a rapid drug delivery system is compared with that of a solid dispersion. The influences of drug load, particle size, and crystallinity of these test systems are investigated. The interactive mixtures and solid dispersions were prepared from polyethylene glycol (PEG) 3350 and hydrophobic nifedipine drug by means of physical mixing and melting methods, respectively. The formed products were subjected to drug particle size and crystallinity analyses, and dissolution tests. In comparison with the interactive mixtures, the solid dispersions with low drug load were more effective as a rapid drug delivery system, as the size of a given batch of drug particles was markedly reduced by the molten PEG 3350. The rate and extent of drug dissolution were mainly promoted by decreasing effective drug particle size. However, these were lower in the solid dispersions than in the interactive mixtures when a high load of fine drug particles was used as the starting material. This was attributed to drug coarsening during the preparation of the solid dispersion. Unlike solid dispersions, the interactive mixtures could accommodate a high load of fine drug particles without compromising its capacity to enhance the rate and extent of drug dissolution. The interactive mixture is appropriate for use to deliver a fine hydrophobic drug in a formulation requiring a high drug load.     

Alginate gel particles–A review of production techniques and physical properties

The application of hydrocolloid gel particles is potentially useful in food, chemical, and pharmaceutical industries. Alginate gel particles are one of the more commonly used hydrocolloid gel particles due to them being biocompatible, nontoxic, biodegradable, cheap, and simple to produce. They are particularly valued for their application in encapsulation. Encapsulation in alginate gel particles confers protective benefits to cells, DNA, nutrients, and microbes. Slow release of flavors, minerals, and drugs can also be achieved by encapsulation in gel particles. The particle size and shape of the gel particles are crucial for specific applications. In this review, current methods of producing alginate gel particles will be discussed, taking into account their advantages, disadvantages, scalability, and impact on particle size. The physical properties of alginate gel particles will determine the effectiveness in different application conditions. This review will cover the current understanding of the alginate biopolymer, gelation mechanisms and factors affecting release properties, gel strength, and rheology of the alginate gel particle systems.     

Characterizations of TiO2/SiO2/Ni–Cu–Zn Ferrite Composite for Magnetic Photocatalysts

The TiO₂/SiO₂/Ni–Cu–Zn ferrite composite for magnetic photocatalysts with high photocatalytic activity is successfully prepared in this study. The composite are composed of spherical or elliptical Ni–Cu–Zn ferrite nanoparticles about 20–60 nm as magnetic cores, silica as barrier layers with thickness of 15 nm between the magnetic cores and titania shells with thickness approximately 1.5 nm. Photodegradation examination of TiO₂/SiO₂/ Ni–Cu–Zn ferrite composite was carried out in methylene blue (MB) solutions illuminated under a Xe arc lamp with 35 W and color temperature of 6000 K. The results indicated that about 47.1% of MB molecules adsorbed on the TiO₂/SiO₂/Ni–Cu–Zn ferrite composite within 30 min mixing due to it higher pore volume of 0.034 cm³/g, and after 6 h Xe lamp irradiation, 83.9% of MB 16.1% was photodegraded. Compared with the TiO₂ /Ni–Cu–Zn ferrite composite, the TiO₂/SiO₂/Ni–Cu–Zn ferrite composite with silica barrier layer prohibited the photodissolution and enhanced the photocatalytic ability. The magnetic photocatalyst shows high photocatalytic efficiency that the apparent first‐order rate constant k_obs is 0.18427 h^?1, and good magnetic property that the saturation magnetization (M_s) of is 37.45 emu/g, suggesting the magnetic photocatalyst can be easily recovered by the application of an external magnetic field.     

The Effects of Annealing Atmosphere on the Electrical Properties of MgNb2O6/ITO Heterostructures

The effects of annealing atmosphere (N₂, air and O₂) on the electrical properties of sol–gel‐derived MgNb₂O₆/ITO heterostructures are discussed in this work. All samples exhibited the amorphous phase and were highly transparent. The percentage of Nb⁴⁺ content increased when the films were annealed in the oxygen‐deficient conditions, which could lead to semiconducting films. In addition, the results show that the electrical properties of sol–gel‐derived MgNb₂O₆ thin films could be tuned based on the annealing atmosphere. Moreover, the conduction mechanisms of MgNb₂O₆/ITO heterostructures are also discussed in this study. The results show that MgNb₂O₆ thin films have potential for use in multifunctional optoelectronic applications, due to their flexible electrical properties and good transparency.     

Preparation and characterization of methoxy‐poly(ethylene glycol) side chain grafted onto chitosan as a wound dressing film

Chitosan has received extensive attention as a biomedical material; however, the poor solubility of chitosan is the major limiting factor in its utilization. In this study, chitosan‐based biomaterials with improved aqueous solubility were synthesized. Two molecular weights (750 Da and 2000 Da) of methoxypoly(ethylene glycol) (mPEG) were grafted onto chitosan (mPEG‐g‐chitosan) to form a ～100‐μm‐thick plastic film as a wound dressing. The chemical structures of the mPEG‐g‐chitosan copolymers were confirmed using Fourier transform infrared spectroscopy (FTIR), and the thermal properties were characterized using thermogravimetry analysis (TGA). Their microstructures were observed using scanning electron microscopy (SEM). The other properties were analyzed via the swelling ratio, tensile strength, elongation, and water vapor transmission rate (WVTR). Biocompatibility evaluations through biodegradability, cytotoxicity, and antimicrobial effect studies were also performed. The obtained mPEG‐g‐chitosan copolymers were soluble in slightly acidic aqueous solutions (pH～6.5) at a concentration of 10 wt %. The optimal mPEG‐g‐chitosan hydrogels had swelling ratios greater than 100% and WVTRs greater than 2000 g/m²/day. Their performance against Staphylococcus aureus will be subjected to further improvements with respect to medical applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42340.