Laser-assisted sealing and testing for ceramic packaging of MEMS devices

In this work, a CO/sub 2/ laser-assisted silicon lid sealing process, utilizing Au80/Sn20 solder, for encapsulating gas breakdown test micro-electro-mechanical structures (MEMS) in a ceramic quad flatpack (CQFP) was studied. Wire bonded MEMS dies were sealed into CQFPs under various gas media, such as air, nitrogen, helium and vacuum. The gas breakdown test results showed a significantly higher breakdown voltage for vacuum packaged parts compared to those packaged in other various gas environments. Hermeticity testing according to MIL-STD-883E showed that the leak rate of the package was below 10/sup -8/ atm cc/s. The bonding was uniform and the bonding strength is believed to be comparable to the tensile strength of Au80/Sn20 solder.     

Chemical natures and distributions of metal impurities in multicrystalline silicon materials

We present a comprehensive summary of our observations of metal‐rich particles in multicrystalline silicon (mc‐Si) solar cell materials from multiple vendors, including directionally‐solidified ingot‐grown, sheet, and ribbon, as well as multicrystalline float zone materials contaminated during growth. In each material, the elemental nature, chemical states, and distributions of metal‐rich particles are assessed by synchrotron‐based analytical x‐ray microprobe techniques. Certain universal physical principles appear to govern the behavior of metals in nearly all materials: (a) Two types of metal‐rich particles can be observed (metal silicide nanoprecipitates and metal‐rich inclusions up to tens of microns in size, frequently oxidized), (b) spatial distributions of individual elements strongly depend on their solubility and diffusivity, and (c) strong interactions exist between metals and certain types of structural defects. Differences in the distribution and elemental nature of metal contamination between different mc‐Si materials can largely be explained by variations in crystal growth parameters, structural defect types, and contamination sources. Copyright © 2006 John Wiley & Sons, Ltd.     

Renaturation of formyltetrahydrofolate synthetase from urea and guanidinium chloride solutions

Formyltetrahydrofolate synthetase from Clostridium cylindrosporum and Clostridium acidi-urici was denatured in 6 M urea and 4 M guanidinium chloride. Viscometric, fluorimetric and ultracentrifugal measurements were used to determine that the protein is completely unfolded under these conditions. The polypeptide chains refold upon dilution of the denaturant-protein solutions to give final concentrations of 0.5 M urea or 0.1 M guanidinium chloride. In the presence of NH4+, but not in its absence, the refolded proteins associate to produce the catalytically active tetramer. Refolding and reassociation were followed by measuring changes in protein fluorescence and by determination of sedimentation constants. Under most conditions 80% of the enzymic activity is recovered.     

The response of cells in culture to fractionated radiation: a theoretical approach

A mathematical model has been constructed to simulate the response of cells in vitro to fractionated doses of radiation. The model is capable of describing most of the radiobiological functions that are commonly studied. Input data are measurable cell properties. The details of the model and methods of acquiring the input data are outlined and a comparison with experimental observations on two radiobiological functions, survival curves and recovery curves are discussed in some detail.     

Transillumination of the skull in premature infants

Transillumination of the skull in infants is a simple technique which can be used to detect several major abnormalities of the central nervous system. The usefulness of transillumination has been limited, however, by the lack of standard techniques for its performance and by the absence of normal values, especially in premature infants. In healthy premature infants, there is a progressive increase in transillumination with increasing gestational age over three sites--the anterior fontanelle, the frontotemporal fossa, and the parieto-occipital eminence.     

Carbon tetrachloride doped Al x Ga1−x As grown by metalorganic chemical vapor deposition

A dilute mixture of CCl₄ in H₂ has recently been shown to be a suitable carbon doping source for obtainingp-type GaAs grown by metalorganic chemical vapor deposition (MOCVD) with carbon acceptor concentrations in excess of 1 × 10¹⁹cm⁻³. To understand the effect of growth parameters on carbon incorporation in CCl₄ doped Al _x Ga_1−x As, carbon acceptor concentration was studied as a function of Al composition, growth temperature, growth rate, and CCl₄ flow rate using electrochemical capacitance-voltage profiling. The carbon incorporation as a function of Al composition, growth temperature and CCl₄ flow rate was also measured by secondary ion mass spectroscopy (SIMS). All layers were grown by low pressure MOCVD using TMGa and TMAl as column III precursors, and 100% AsH₃ as the column V source. Increased Al composition reduced the dependence of carbon concentration on the growth temperature. Reduced growth rate, which resulted in substantially decreased carbon acceptor concentrations in GaAs, had an insignificant effect on the carrier concentration of Al_0.4Ga_0.6As. A linear relationship between hole concentration and CC1₄ flow rate in Al_xGa_1−x As for 0.0 ≤x ≤ 0.8 was observed. These results are interpreted to indicate that adsorption and desorption of CCl _y (y ≤ 3) on the Al _x Ga_1-x As surface during crystal growth plays an important role in the carbon incorporation mechanism.     

Molecular regulation of UVB-induced cutaneous angiogenesis

We determined whether cutaneous angiogenesis induced by exposure of mice to ultraviolet-B (UVB) radiation is associated with an imbalance between positive and negative angiogenesis-regulating molecules. Unshaved C3H/HeN mice were exposed to a single dose (15 kJ per m2) of UVB. At various times, the mice were killed, and their external ears were processed for routine histology and immunohistochemistry. Antibodies against proliferating cell nuclear antigen and bromodeoxyuridine identified dividing cells. Antibodies against CD31/ PECAM-1 identified endothelial cells, and antibodies against basic fibroblast growth factor (bFGF), vascular endothelial growth factor/vascular permeability factor, and interferon-beta (IFN-beta) identified angiogenesis-regulating molecules. Epidermal hyperplasia was documented by 48 h and reached a maximum on day 7 after exposure to UVB. The expression of bFGF increased by 24 h, whereas the expression of IFN-beta decreased by 72 h after exposure to UVB. The expression of vascular endothelial growth factor/vascular permeability factor increased slightly after irradiation. The altered balance between bFGF and IFN-beta was associated with increased endothelial cell proliferation (bromodeoxyuridine + CD31 + cells) within existing blood vessels, leading to telangiectasia and new blood vessels. UV-induced epidermal hyperplasia and cutaneous angiogenesis were highest in IFN-alpha/beta receptor knockout mice. These results demonstrate that in response to UVB radiation, dividing keratinocytes produce a positive angiogenic molecule (bFGF) but not a negative angiogenic molecule (IFN-beta), and that this altered balance is associated with enhanced cutaneous angiogenesis.     

Comparison of various modeling methods for analysis of powder compaction in roller press

Recently used models relating basic properties of the feed material, roller press design and its operating parameters are reviewed. In particular, we discuss the rolling theory for granular solids proposed by J.R. Johanson in the 1960s, later trials utilizing slab method and newly developed final element models. These methods are compared in terms of efficiency and accuracy of predicting the course of basic process variables like nip angle, pressure distribution in roll nip region, neutral angle, roll torque and roll force.

The finite element method offers the most versatile approach because it incorporates adequate information about powder behavior, geometry and frictional conditions. This enables to perform realistic computer experiments minimizing costs, time and resources needed for process and equipment optimization.