High-yield expression, purification, and characterization of active, soluble Bacteroides fragilis metallo-beta-lactamase, CcrA

Two new areas of anchor development are biodegradable anchors and "mini" anchors. The group of biodegradable anchors tested include the Bio-Anchor, LactoSorb, Biofix, Bio-Statak, Mini Screw suture anchor, DePuy 4.5 molded, DePuy 4.5 machined, DePuy 3.5 machined, TAG Wedge 4, TAG Rod 2, TAG Wedge 3, TAG Wedge 2, and Stealth. "Mini anchors" have drill holes or minor diameters of < 2.2 mm. Those tested include the Mini Revo and Bio-Anchor, miniHarpoon, mini Mitek and Fast in 3, Statak 1.5 and 2.5, SB 2 and PeBA 3, Corkscrew 5, Corkscrew 3.5, and Fastak A2, Ogden 2.5, TAG Wedge 2, ROC 1.9, and Questus 2.5. Additional anchors tested that fit neither category include the Anspach, Questus 3.5 and 5.0, SB 3 and PeBA-C, Ogden 3.5, Fast in 4, Ultrafix, and the ROC 3.5, ROC 2.8, ROC 2.3, and ROC XS. An anchor comparison, using an established protocol in fresh porcine femurs, recorded failure strength, failure mode, eyelet size, minor and major diameters, and drill hole sizes. Except for the Bio-Anchor and TAG Wedge 2, biodegradable anchors tend to be larger to compensate for their lower strength relative to metal. Biodegradable screw anchors' predominant failure mode was eyelet cutout, whereas biodegradable nonscrew anchors failed to predominantly by anchor pullout. From an initial mechanical perspective, these biodegradable anchors perform acceptably. Both biodegradable and "mini" anchors include screw and nonscrew designs. As expected, screw designs perform well and generally fail at higher loads than nonscrew anchors. Although biodegradable anchors, as a group, are not as strong as metal anchors, they are stronger than the sutures for which they are designed. The move to smaller ("mini") and biodegradable anchors is supported by these data. Whether an anchor fails at twice the suture breaking strength or 10 times the suture breaking strength should make no difference.     

Patients'' and relatives'' opinion and knowledge about electroconvulsive therapy: implications for nursing

This study examines sources of motivation to seek treatment. Participants were 105 male alcoholics and their non-alcoholic female partners who participated in a study of three different approaches to the conjoint treatment of alcoholism. Participants' sources of motivation were coded from responses to questions at the initial clinical screening interview. Sources of motivation were classified as "internal" or "external." More participants had internal sources of motivation (74%) than external sources. Participants with internal sources of motivation scored higher on the Michigan Alcoholism Screening Test than participants with external sources of motivation, but did not differ on other measures of pretreatment severity of alcohol problems. About half of the participants (53%) cited their partner as a primary source of motivation to seek treatment. Other sources of motivation cited were: increasing problems with alcohol, mental health problems, and physical health problems. There was greater variability among internal sources of motivation than among external sources of motivation. Participants' partners but not the male participants themselves, experienced an increase in marital satisfaction from pre- to within-treatment when the participant was motivated to come to treatment by his partner.     

The synergy of low lung function and low body mass index predicting all-cause mortality among older Japanese-American men

OBJECTIVE: To assess the joint characteristics of low standardized weight and compromised pulmonary function in predicting all-cause mortality. DESIGN: A population-based, prospective cohort study. SETTING: Oahu Island, Hawaii. PARTICIPANTS: Surviving Japanese-American men of the Honolulu Heart Program cohort, 71 to 93 years of age (N = 3059). MEASUREMENTS: Body mass index (BMI-weight in kilograms/square of height in meters) and 1-second forced expiratory volume (FEV1) as a percentage of age- and height-predicted FEV1 from the 1991 to 1993 examination of the cohort. Mortality data derived from the ongoing tracking of deaths of the cohort. Relations of selected risk factors among joint levels of BMI (< or = 21, > 21 to < 25, > or = 25 kg/m2) and percent predicted FEV1 (< or = 70%, > 70%) were determined. The impact of these covariates on relations between joint BMI/percent predicted FEV1 levels and subsequent all-cause mortality was assessed. RESULTS: The highest age-adjusted mortality rate (91.9 deaths per 1000 person-years) was noted among men characterized by the joint conditions of percent predicted FEV1 < or = 70% and BMI < or = 21 kg/m2. This rate was 4.0 times the mortality rate of a "healthy" reference group characterized by percent predicted FEV1 > 70% and 21 < BMI < 25 kg/m2. This rate ratio is attenuated to 3.2 upon statistical control for measures of current and past smoking behavior. Among the three strata of BMI, statistical interaction is reflected in a heterogeneity of mortality rate differences (49.7, 21.8, -9.6 deaths/person-year, respectively) and rate ratios (2.18, 1.98, .66, respectively) comparing men with percent predicted FEV1 < or = 70% to > 70%. CONCLUSION: Joint loss of pulmonary function and relative weight is predictive of subsequent all-cause mortality in excess of additive or multiplicative effects of each condition separately. Smoking behavior may contribute to this observation.     

Digestion of pre‐treated food waste in a hybrid anaerobic solid–liquid (HASL) system

The hybrid anaerobic solid–liquid (HASL) system was developed to be used in industrial‐scale operations to minimize the amount of food waste for disposal in Singapore. Thermal pre‐treatment of food waste at 70 °C for 2 h (experiment E1) or at 150 °C for 1 h (experiment E2) facilitated the hydrolytic and acidogenic processes in the acidogenic reactor and methanogenesis in the methanogenic reactor in the HASL system. The highest dissolved chemical oxygen demands in the effluents from the acidogenic reactors were 17 575, 19 980 and 24 235 mg dm^?3 in the control with food waste without thermal pre‐treatment and experiments E1 and E2, respectively. The maximum concentrations of methanogens in the methanogenic reactor were 2.3 × 10⁷, 3.8 × 10⁷, 4.3 × 10⁷ cells cm^?3 for the control and experiments E1 and E2, respectively. However, the performances of the methanogenic phase in terms of specific activity of methanogens did not differ significantly for the control and experiments E1 and E2. Use of thermally pre‐treated food waste halved the time to produce the same quantity of methane in comparison with anaerobic digestion of fresh food waste. The fluorescent measurements of co‐enzyme F₄₂₀ and oligonucleotide probe Arc915 specifically bound (hybridized) with 16S rRNA were used for monitoring of methanogens during anaerobic digestion of food waste. There was a linear correlation between these parameters and the concentration of methanogens in the effluent from the methanogenic reactor. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of aldehyde-capped polyisobutylenes

Summary The synthesis and characterization of linear mono- and ditelechelic polyisobutylenes (PIBs) carrying terminal primary aldehyde groups are described. The synthesis starts by chlorine terminated PIBs (PIB−Cl and Cl−PIB−Cl) prepared by inifering or living carbocationic polymerization. These starting materials were dehydrochlorinated to vinylidene (∼CH₂−C(CH₃)=CH₂) terminated PIBs and hydroformylated with CO/H₂ in the presence of a rhodium catalyst. According to NMR (500 MHz) and GPC analyses, the transformations are selective and demonstrably quantitative. The structures of these novel polymers are: I view of the rich chemistry of the aldehyde group, these materials are valuable intermediates.     

Biological nutrient removal in a sequencing batch reactor using ethanol as carbon source

BACKGROUND: When organic matter is limiting for biological nutrient removal (BNR) from wastewater, external organic carbon can be added to a wastewater treatment plant (WWTP). This increases the overall treatment cost, so the choice of substrate is critical. The effect of using ethanol as the carbon source for BNR is investigated. RESULTS: The results clearly showed that using ethanol as a carbon source is a promising strategy for removing nutrients from wastewater. Effluent concentrations of 3.0 mg total nitrogen (TN) L^?1 (96% N removal efficiency) and 0.05 mg phosphate (P‐PO₄) L^?1 (99.9% P removal efficiency) were obtained. Furthermore, tests performed in order to identify the carbon source used by polyphosphate‐accumulating organisms (PAOs) showed that the phosphorus release/carbon uptake ratio using ethanol (0.41 mmol P mmol^?1 C) was slightly lower than that with acetate (0.50 mmol P mmol^?1 C) but close to that with propionate (0.42 mmol P mmol^?1 C). CONCLUSION: Therefore, taking into account the results presented for ethanol‐acclimatised biomass and the fact that the cost of ethanol is lower than that of acetate or propionate, ethanol can be considered as an alternative carbon source if one is needed in a WWTP. Copyright © 2007 Society of Chemical Industry     

Integrated tilt with active lateral secondary suspension control for high speed railway vehicles

This paper presents a novel active suspension control configuration for high speed tilting railway vehicles which integrates tilt with active lateral secondary suspension. The use of the active lateral secondary suspension is to attenuate the vehicle body lateral vibration on straight track, while complementing tilt action during curving. Various control strategies are proposed to accommodate both tilt and active lateral suspension multiple design requirements, whilst considering the strong interaction between vehicle body roll and lateral modes. Compared with the commercial solutions for tilt control, the proposed integration strategy improves the tilting control performance both on curved and straight track as illustrated by simulation tests and control assessments based on given track profiles.