All-trans beta-carotene is absorbed preferentially to 9-cis beta-carotene, but the latter accumulates in the tissues of domestic ferrets (Mustela putorius puro)

The algae Dunaliella bardawil and Dunaliella salina naturally contain large concentrations of all-trans and 9-cis beta-carotene (betaC). The purpose of this study was to compare the relative serum and tissue accumulation of all-trans and 9-cis betaC in ferrets fed different ratios of all-trans/9-cis betaC derived from two commercial sources, D. bardawil or D. salina (Betatene). Male ferrets (7 wk old) were fed carotene-free, pelleted diets for 27 d. Beginning on d 18, groups of ferrets (n = 6 or 7) received daily, one of six oral supplements varying in ratios of 9-cis and all-trans betaC mixed with approximately 1.0mL of Ensure. Four supplements containing 5.2-8.3 micromol total betaC were prepared from a 20% Betatene preparation, D. bardawil, a high-cis Betatene preparation, and Betatene further enriched in 9-cis betaC with all-trans betaC/9-cis betaC ratios of 2.2, 1.5, 0.6 and 0.4, respectively. Two control supplements, high and low betaC, were prepared from commercial betaC beadlets. The high control supplement had an all-trans/9-cis ratio of 19.0, whereas 9-cis betaC was not detected in the low supplement. On d 27, serum and tissues were obtained for HPLC analysis of betaC and its isomers. Analysis of livers showed that all-trans betaC was the primary isomer present, but 9-cis and other isomers were also detected in all groups. The hepatic all-trans/9-cis ratios were 5.9, 4.9, 2.5, 1.4, 52.2 and47.5, respectively, for the groups listed above. Lower amounts of all-trans and 9-cis betaC were found in kidneys compared with the liver, but ratios of all-trans/9-cis were not different among groups. Only trace amounts of 9-cis betaC were found in serum. These results demonstrate that the algae D. bardawil and D. salina provide a bioavailable source of betaC isomers, but, as in humans, absorption of 9-cis betaC is poor and any 9-cis betaC absorbed is apparently cleared by the liver.     

Blowtooth: a provocative pervasive game for smuggling virtual drugs through real airport security

In this paper, we describe a pervasive game, Blowtooth, in which players use their mobile phones to hide virtual drugs on nearby airline passengers in real airport check-in queues. After passing through airport security, the player must find and recover their drugs from the innocent bystanders, without them ever realising they were involved in the game. The game explores the nature of pervasive game playing in environments that are not, generally, regarded as playful or “fun”. This paper describes the game’s design and implementation as well as an evaluation conducted with participants in real airports. It explores the players’ reactions to the game through questionnaire responses and in-game activity. The technologies used in Blowtooth are, intentionally, simple in order for the enjoyment of the game to be reliant more on the physical environment rather than the enabling technologies. We conclude that situating pervasive games in unexpected and challenging environments, such as international airports, may provide interesting and unique gaming experiences for players. In addition, we argue that pervasive games benefit most from using the specific features and nature of interesting real-world environments rather than focusing on the enabling technologies.     

Fractionation studies of palm oil by density gradient

The paper describes a method of fractionating vegetable, animal and fish oils, and in particular palm oil. The method involves addition of a medium comprising two common solvents to the semisolid oils. On centrifugation, the olein and stearin are separated by the medium in the middle. Thirteen media made up from binary combinations of nine solvents, viz. water, propylene glycol, glycerine, methanol, ethanol,n-propanol, isopropanol (IPA), acetone and butanone, are found to be effective in olein-stearin separation. However, only the water/IPA and water/methanol systems have been studied in detail. The aqueous IPA provides a higher yield of olein than water/ methanol but intersolubility between oil and medium is also greater. The fractionation process can be carried out at any suitable temperature. Fractionation of the special prime bleached (SPB) palm oil at 16 C yields an olein with a cloud point of 4.8 C. Some hybrid palm oils produce a large quantity of low cloud point olein which can be bleached readily. The process can be extended to include degumming and neutralization by using an alkaline medium for centrifugation. The olein fractions obtained have been found to be free of phosphatides and the free fatty acids reduced to as low as 0.02%. Metal-scavenging agents have also been added to the medium in an attempt to remove copper and iron. The development of this process into a continuous one has been demonstrated on the AlfaLaval LAPX 202 Separator. Fractionation of crude palm oil using a density gradient provides seven fractions of different characteristics. The iodine values vary from 37.5 to 57.4 and the unsaturated fatty acids range from 32.7% to 51.2%. Triglyceride analysis by carbon numbers shows great differences in the C₄₈ and C₅₂ constituents of the fractions. aThe volume ratio of oil to medium in each case was 1:1. The separation involved the oil and wax.     

Solvent extraction of metals from chloride solutions

A review is presented of a series of investigations into the extraction of copper, iron, zinc and cadmium into kerosene solutions of Lix or Kelex reagents from aqueous solutions containing chloride ions. The effects of chloride ions on the extraction of copper and iron were smaller than might have been expected to result from the formation of inextractable metal chlorocomplexes, and the extractants retained their selective properties. Extraction with Kelex 100 from chloride solution increased the separation between zinc and cadmium, in comparison with sulphate solutions.     

C-19 diacid-based polyamides

The preparation and properties of polyamide hot-melt adhesives derived from Koch C-19 diacid are described. They are comparable to those of commercial C-36 dimer acid-based polyamides for bonding leather and metals and somewhat superior to those of polyamides made from C-19 diacid derived from a hydroformylation process. Presented at the AOCS annual meeting, Toronto, May 1982.     

Managing obesity through mobile phone applications: a state-of-the-art review from a user-centred design perspective

Evidence has shown that the trend of increasing obesity rates has continued in the last decade. Mobile phone applications, benefiting from their ubiquity, have been increasingly used to address this issue. In order to increase the applications’ acceptance and success, a design and development process that focuses on users, such as user-centred design, is necessary. This paper reviews reported studies that concern the design and development of mobile phone applications to prevent obesity, and analyses them from a user-centred design perspective. Based on the review results, strengths and weaknesses of the existing studies were identified. Identified strengths included: evidence of the inclusion of multidisciplinary skills and perspectives; user involvement in studies; and the adoption of iterative design practices. Weaknesses included the lack of specificity in the selection of end-users and inconsistent evaluation protocols. The review was concluded by outlining issues and research areas that need to be addressed in the future, including: greater understanding of the effectiveness of sharing data between peers, privacy, and guidelines for designing for behavioural change through mobile phone applications.     

Investigation of the mechanistic basis for ferrocene activity during the combustion of vinyl polymers

The influence of ferrocene on the flammability and smoke generation behavior and thermal characteristics of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVC) was examined in order to understand the basis of ferrocene's activity as a flame-retardant and smoke-suppressant additive. Ferrocene increased char formation in PVC by 20–60% while increasing the limiting oxygen index (O.I.) by 15–19%. Little char was found either with or without ferrocene in PVA, which had little improvement in O.I. Visible smoke was significantly decreased by ferrocene in PVA and in PVC of low to moderate molecular weight, but was unchanged in high molecular weight PVC. O.I. of PVC appeared to vary with molecular weight of the polymer. Thermogravimetric analyses and thermal degradation experiments showed that ferrocene promotes early weight loss and crosslinking in PVC. This effect is coincidental with the formation of ferricenium cation, which was identified by its visible spectrum and which may be a possible catalyst. Smoke inhibition of PVA by ferrocene occurs predominantly through gas-phase processes, while in PVC evidence and analogy for activity in both the gas phase and condensed phase are found.     

When simulated environments make the difference: the effectiveness of different types of training of car service procedures

An empirical analysis was performed to compare the effectiveness of different approaches to training a set of procedural skills to a sample of novice trainees. Sixty-five participants were randomly assigned to one of the following three training groups: (1) learning-by-doing in a 3D desktop virtual environment, (2) learning-by-observing a video (show-and-tell) explanation of the procedures, and (3) trial-and-error. In each group, participants were trained on two car service procedures. Participants were recalled to perform a procedure either 2 or 4 weeks after the training. The results showed that: (1) participants trained through the virtual approach of learning-by-doing performed both procedures significantly better (i.e. p < .05 in terms of errors and time) than people of non-virtual groups, (2) the virtual training group, after a period of non-use, were more effective than non-virtual training (i.e. p < .05) in their ability to recover their skills, (3) after a (simulated) long period from the training—i.e. up to 12 weeks—people who experienced 3D environments consistently performed better than people who received other kinds of training. The results also suggested that independently from the training group, trainees’ visuospatial abilities were a predictor of performance, at least for the complex service procedure, adj R ² = .460, and that post-training performances of people trained through virtual learning-by-doing are not affected by learning styles. Finally, a strong relationship (p < .001, R ² = .441) was identified between usability and trust in the use of the virtual training tool—i.e. the more the system was perceived as usable, the more it was perceived as trustable to acquire the competences.