Improved strained HEMT characteristics using double-heterojunctionIn0.65Ga0.35As/In0.52Al0.48As design

The DC and microwave properties of strained In_0.65Ga _0.35As/In₀₅₂Al_0.48As HEMTs (high electron-mobility transistors) with double-heterojunction design are presented. The high sheet carrier density and good carrier confinement give rise to excellent device performance with very low output conductance. For 1×150-μm² long-gate HEMTs, the measured cutoff frequency f_T and maximum frequency of oscillation f_max are as high as 37 and 66 GHz, respectively     

Prevalence and role of anticardiolipin antibodies in Crohn disease

OBJECTIVES: Anticardiolipin antibodies belong to the group of antiphospholid antibodies, and may be seen in association with endothelial damage and recurrent vascular thrombosis. The aim of our study was to determine in patients with Crohn's disease the frequency of anticardiolipin antibodies, and to correlate their presence with clinical activity and treatment of the disease. METHODS: One hundred and thirty-eight sera from patients with Crohn's disease and 118 from age-matched controls were tested for IgG anticardiolipin antibodies. In the Crohn's disease group, we determined whether the patients had a past history of vascular thrombosis, a clinically active intestinal disease, or a current immunosuppressive therapy (steroids or azathioprine). RESULTS: Anticardiolipin antibodies were found significantly more often in patients with Crohn's disease than in controls: 11.0% versus 2.5%, P < 0.02. Three patients with Crohn's disease had a past history of vascular thrombosis, but none of them had anticardiolipin antibodies. The presence of anticardiolipin antibodies was not correlated with the fact that patients had a clinically active disease (P = 0.77), or a current immunosuppressive therapy at the time of the serological test (P = 0.95). CONCLUSIONS: There is a significantly high prevalence of patients with anticardiolipin antibodies during Crohn's disease. The positivity of the test does not seem to be correlated to the existence of a past history of vascular thrombosis, nor to the clinical activity of the disease.     

Object illumination angle measurement in speckle interferometry

Errors in measurement of the object illumination angle affect fringe interpretation accuracies in speckle interferometry. To measure the object illumination angle we propose a method based on the moiré effect. The technique is easy to implement and was found to yield fast and accurate measurements.     

White-light reconstruction setup for shearograms using optical-fiber waveguides

A white-light reconstruction setup for shearograms using optical-fiber waveguides is presented. The setup is compact, is not susceptible to dust and scratches, and enables the two-dimensional fringe pattern on shearograms to be viewed directly under uniform and enhanced illumination with minimal image distortion.     

Anatomically constrained electrical impedance tomography for anisotropic bodies via a two-step approach

Discusses the inclusion of anatomical constraints and anisotropy in static Electrical Impedance Tomography (EIT) using a two-step approach to EIT. In the first step, the boundaries between regions of different conductivities are anatomically constrained using Magnetic Resonance Imaging (MRI) data. In the second step, the conductivity values in different regions are determined. Anisotropic conductivity regions are included to allow better modeling of the muscle regions (e.g., skeletal muscle) which exhibit a greater conductivity in the direction parallel to the muscle fiber. This two-step approach is used to reconstruct the conductivity profile of a canine torso, illustrating its potential application in extracting conductivity values for bioelectric modeling.     

Development of a web-based insulin decision aid for the elderly: usability barriers and guidelines

Universal Access in the Information Society - In recent years, researchers have attempted to shift patient decision aids (PDAs) from paper-based to web-based to increase its accessibility. Insulin...     

Note: A method to isolate and detect a large number of single molecules by microdroplet fluorescence spectroscopy

A laser induced fluorescence system, in combination with a glass-frit nebulizer and a photo-voltaic cell detector, is described for single molecule detection. The glass-frit nebulizer continuously generates a large number of droplets with an average droplet size of three micrometers in diameter. Rhodamine 6G molecules were detected at the 10(-12) M level. Concentrations 10(-12)-10(-10) M would provide mostly single molecules (0, 1, 2, 3, ...) in the individual droplets, as determined by Poisson distribution.     

Microstructure evolution of the Sn–Ag–y%Cu interconnect

The lead free Sn–Ag–y%Cu (y = 0.0, 0.5, 1.0 and 2.0) interconnect interfacial microstructures and the microstructure evolution under thermal treatment (isothermal aging, 150 °C/1000 h) were studied in detail by using surface microetching microscopy and cross section microscopy. The corresponding mechanical and reliability behaviors were evaluated by performing shear test and fracture mode analysis before and after the thermal treatment. The results indicate: (i) The interconnects could have different microstructures and intermetallic compound (IMC), depending on the Cu content. The Cu–Sn IMC could have microstructures that were clusters or protrusion-like, Augustine grass leaf-like, scissor-like, tweezers-like, etc. (ii) Ag₃Sn IMCs were not observed at time zero for any interconnect groups, but they occurred after the aging for all groups. The Ag₃Sn IMC could have different microstructures, again depending on Cu content. For low Cu content, the Ag₃Sn IMCs were granules or nodules; for higher Cu content, Ag₃Sn IMCs were plate-like. (iii) The growth of Ag₃Sn plates was promoted by the growth of Cu–Sn IMCs, but indirectly linked to the Cu content. (iv) High Cu content (1.0 wt% and higher) could degrade the mechanical and reliability performances of the LF interconnect by providing a brittle joint, which was mainly achieved through the substantial growth of Cu–Sn IMCs and Ag₃Sn plates.