Bücherschau

Ohne Zusammenfassung VDI     

Edible mushrooms: a potential source of essential amino acids,glucans and minerals

The main chemical and biochemical constituents of nine edible mushrooms were evaluated in this study. An enzymatic method was used to determine the α‐ and β‐glucan contents, and the amino acid (AA) profiles were evaluated by RP‐HPLC‐DAD. The recommended dietary allowance (RDA) of the nutrients was evaluated. Finally, principal component analysis (PCA) was used to group the mushrooms according to their AA, glucans and chemical composition. All mushrooms evaluated can be considered as a potential and alternative source of dietary fibre (24.4–46.62%) and protein (16.47–36.96%) in a diet, with low contents of fat (1.40–2.08%). Phosphorus, potassium, iron, copper and zinc were the main minerals found in the mushrooms, whereas sodium concentration was negligible. All essential AA were detected in the mushrooms, with Pleurotus ostreatus (black oyster) representing the main source of essential amino acids among the samples. The contents of β‐glucan ranged from 1.58 to 16.91 mg g^?1 of dry matter among the mushrooms and Pleurotus eryngii presented the highest amount of this component. Pleurotus ostreatus (black oyster) and P. eryngii were also grouped together due to similarities in their phosphorous and arginine contents. Among the main results, it can highlight the high concentration of dietary fibre and essential amino acids of the edible mushrooms.     

Different metabolic and absorption patterns of betaine in response to dietary intake of whole-wheat grain, wheat aleurone or rye aleurone in catheterized pigs

In the present study, a novel method of measuring the uptake of nutrients by 1H NMR spectroscopy was performed to determine dietary effects. Six pigs catheterized in the portal vein and mesenteric artery were fed breads made from whole-wheat grain (WWG), wheat aleurone flour (WAF; 19?% aleurone of bread) or rye aleurone flour (RAF; 15?% aleurone of bread) in a repeated 3?×?3 crossover design. Three meals were provided daily (at 0, 5 and 10?h), and each period comprised of 1?week. Portal and arterial blood samples were collected at fasting (?30?min) on day 4–7, and on day 7, pooled blood samples were collected at 0–2.5, 2.5–5, 5–7.5 and 7.5–10?h after first (0?h) daily meal. Using the arterial-venous difference and ANOVA–simultaneous component analysis, plasma betaine was found to accumulate during the experimental period. On day 7, plasma betaine concentrations was 20–40?% higher than when feeding the WAF diet compared with RAF and WWG (P?=?0.001), whereas the content of betaine in the WAF diet was about twice as high. The arterial-venous difference showed a tendency (P?=?0.078) for the diet–time interaction of betaine absorption in the absorption phases but there was no diet effect (P?=?0.31), which indicates a steady-state absorption has been reached on day 7. Furthermore, high plasma betaine levels correlated with low plasma creatine of endogenous origin. In conclusion, the explorative method revealed that the plasma concentration and absorption of betaine were differentially modified by the diets.     

Synthesis of Tribologically Favorable Coatings for Hot Extrusion Tools by Suspension Plasma Spraying

Up to now, no coating systems have been marketed in the field of direct hot extrusion, which provide both surface protection of the parts in contact with the billet (i.e., container and die) as well as a significant reduction of the frictional losses induced by the billet passing over the container walls. To dispense with the use of lubricants and to enhance the usable forming capacity and therefore the efficiency of the process, different oxide ceramics were prepared in one suspension and plasma sprayed to produce coatings. The aim was to reach a sufficient level of feedstock mixing to obtain deterministic solid solutions of the oxide phases in coatings resulting in a reduction of their coefficient of friction under dry sliding conditions. To achieve this objective, the high specific surface area of nanosized feedstock with primary particle sizes below 100?nm was used. By means of x-ray diffraction it could be proven, that the desired phases could be synthesized to varying ratios regarding the different coating systems considered here. Besides the experimental work, the fundamentals of the mixing process of different oxides are discussed with regard to the crystallographic aspects.     

Antennas for next generation mobile communications

In future mobile communications many antennas will coexist on the device. This creates a number of problems related to bandwidth, efficiency, and correlation. Remedies are discussed in the paper, and attention is called to the promising area of adaptive matching, which also can solve problems related to the user.     

Suitable Impact Parameters for High-Speed Joining and Influence on the Bonding Zone Microstructure

Welding by electromagnetic forming is an interesting alternative for material combinations which are not suitable for conventional welding by melting. Even though the underlying bonding mechanisms and the right choice of process parameters are thoroughly discussed in the current literature, there is still a lack of target-oriented process dimensioning. The present paper describes the model experiment used for studying the dependencies between bonding quality and design parameters for three material combinations (mild steel, aluminum base alloy, pure titanium). The resulting bonding zones were analyzed by means of optical microscopy and electron probe microanalyses. Limits for the process parameters are described and the results demonstrate increasing bonding qualities for increasing collision energies and collision angles.     

The amount of information and the volume of ‘information tare’

A distinction is suggested between the notions ‘information tare’, the role of which is played by the signals or letters forming the message, and ‘information’, which may be contained in such messages. It is shown that Shannon's definition of the amount of information is, in fact, the definition of the volume of information tare, whereas the amount of information itself may be measured as the volume of information tare of the maximally compact message used for its recording. This allows one to express both the volume of information tare, H, and the amount of information, B, in the same units of measurement–bits–and for any message B≤H. Some consequences of these views are analysed.     

Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I

Synthetic patch materials currently in use have major limitations, such as high susceptibility to infections and lack of contractility. Biological grafts are a novel approach to overcome these limitations, but do not always offer sufficient mechanical durability in early stages after implantation. Therefore, a stabilising structure based on resorbable magnesium alloys could support the biological graft until its physiologic remodelling. To prevent early breakage in vivo due to stress of non-determined forming, these scaffolds should be preformed according to the geometry of the targeted myocardial region. Thus, the left ventricular geometry of 28 patients was assessed via standard cardiac magnetic resonance imaging (MRI). The resulting data served as a basis for a finite element simulation (FEM). Calculated stresses and strains of flat and preformed scaffolds were evaluated. Afterwards, the structures were manufactured by abrasive waterjet cutting and preformed according to the MRI data. Finally, the mechanical durability of the preformed and flat structures was compared in an in vitro test rig. The FEM predicted higher durability of the preformed scaffolds, which was proven in the in vitro test. In conclusion, preformed scaffolds provide extended durability and will facilitate more widespread use of regenerative biological grafts for surgical left ventricular reconstruction.     

Minimizing photodecomposition of flavin adenine dinucleotide fluorescence by the use of pulsed LEDs

Dynamic alterations in flavin adenine dinucleotide (FAD) fluorescence permit insight into energy metabolism‐dependent changes of intramitochondrial redox potential. Monitoring FAD fluorescence in living tissue is impeded by photobleaching, restricting the length of microfluorimetric recordings. In addition, photodecomposition of these essential electron carriers negatively interferes with energy metabolism and viability of the biological specimen. Taking advantage of pulsed LED illumination, here we determined the optimal excitation settings giving the largest fluorescence yield with the lowest photobleaching and interference with metabolism in hippocampal brain slices. The effects of FAD bleaching on energy metabolism and viability were studied by monitoring tissue pO₂, field potentials and changes in extracellular potassium concentration ([K⁺]_o). Photobleaching with continuous illumination consisted of an initial exponential decrease followed by a nearly linear decay. The exponential decay was significantly decelerated with pulsed illumination. Pulse length of 5 ms was sufficient to reach a fluorescence output comparable to continuous illumination, whereas further increasing duration increased photobleaching. Similarly, photobleaching increased with shortening of the interpulse interval. Photobleaching was partially reversible indicating the existence of a transient nonfluorescent flavin derivative. Pulsed illumination decreased FAD photodecomposition, improved slice viability and reproducibility of stimulus‐induced FAD, field potential, [K⁺]_o and pO₂ changes as compared to continuous illumination.     

Über die Thermische Umsetzung von Mono-n-alkylbenzenen

Thermal Reaction of Mono-n-alkyl-benzenes The pyrolysis of ethyl-( 1 ), n-propyl-( 2 ), n-hexyl-( 3 ) and n-octylbenzene ( 4 ) has been studied under conditions of steam cracking (600 to 800°C) in a laboratory scale tubular reactor. The overall activation energies determined for ( 1 ) to ( 4 ) were found to be nearly identical (221 to 227 kJ · mol⁻¹) obviously caused by similar initial steps. The main liquid product observed was styren accompanied by ω-phenyl-1-alkenes and α-olefins. Benzene is an important side product of 1 . It might be formed mainly by a hydrogen assisted dealkylation via a cyclohexadienyl type radical as reactive intermediate.