In vivo Doppler shift measurements using multimode fiber-opticcatheters

A new fiber-optic catheter for in vivo blood-flow measurements has been developed. The catheter is designed to measure blood flow in both the forward (toward the catheter tip) and reverse (away from the catheter tip) flow directions. It consists of two multimode optical fibers with core diameter of 50 μm and cladding diameter of 125 μm. One fiber transmits the laser beam into blood and the other receives the backscattered light from the erythrocytes within the probe volume. In the flow experiment, it was found that the flow within the boundary layer is indeed laminar and, hence, the relationship between the Doppler shift frequencies and the flow velocities is linear, thereby making the linear calibration possible for predicting the free stream flow velocity. Plots of the maximum shift frequency (frequency at which the Doppler spectrum disappeared into the noise spectrum) against the flow velocities are found to be more linear in both the forward and reverse flow directions than that of the dominant shift frequency (frequency with the highest amplitude). These results were reaffirmed by the numerical flow simulation along the catheter side wall     

Scalar quantisation of LSF parameters using vector measurement

A new form of line spectral frequency (LSF), bounded line spectral frequency, is presented. It is shown that the new representation is more efficient than the direct line spectral frequency and the differential line spectral frequency (DLSF). By using a vector measure, the scalar quantisation of tenth-order linear predictive coding (LPC) parameters can be coded at 28 bit/frame with a transparent quantisation quality     

Effects of high temperature annealing on the device characteristics of Ga0.52In0.48P/GaAs and Al0.52In0.48P/GaAs heterojunction bipolar transistors

GaInP/GaAs and AlInP/GaAs heterojunction bipolar transistor (HBT) structures were grown by low pressure metalorganic vapor phase epitaxy and annealed at various temperatures up to 675°C for 15 min. Subsequent comparisons with HBTs fabricated on both annealed and unannealed control samples showed no effects for annealing up to and including 575°C, but significant changes in the electrical characteristics were observed at an annealing temperature of 675°C. For the GaInP/GaAs devices, the base current increased by a significant amount, reducing the gain and increasing the base current ideality factor from 1.07 to 1.9. Photoluminescence and electrical measurements on the structures indicated that both the emitter and base were affected by an increase in the recombination times in those regions. These effects were attributed to an out-diffusion of hydrogen from the base during annealing. The emitter of the AlInP/GaAs HBT was affected less by the hydrogen diffusion because of the larger bandgap. These observations have important implications for device performance dependence on the details of the temperature/time profile subsequent to the base growth.     

Study on stacking faults and microtwins in wide bandgap II-VI semiconductor heterostructures grown on GaAs

ZnMgSSe and ZnSSe layers grown on GaAs substrates with GaAs buffer layers by molecular beam epitaxy have been examined by transmission electron microscopy (TEM). The depth level at which paired triangular stacking faults are nucleated in the ZnMgSSe/GaAs heterostructure has been investigated by using the plan-view TEM technique. It has been found that in the ZnMgSSe/GaAs heterostructure the nucleation of the paired stacking faults occurs within a range of depth which starts at the II-VI/GaAs interface and ends at a level that is above the interface by about 120 nm. The dominant type of defects in ZnSSe layers, which have the single triangular shape, has been identified to be microtwins by high resolution TEM.     

An efficient algorithm for superresolution in medium field imaging

In this paper, we study the problem of reconstruction of a high-resolution (HR) image from several blurred low-resolution (LR) image frames in medium field. The image frames consist of blurred, decimated, and noisy versions of a HR image. The HR image is modeled as a Markov random field (MRF), and a maximum a posteriori (MAP) estimation technique is used for the restoration. We show that with the periodic boundary condition, a HR image can be restored efficiently by using fast Fourier transforms. We also apply the preconditioned conjugate gradient method to restore HR images in the aperiodic boundary condition. Computer simulations are given to illustrate the effectiveness of the proposed approach. This research was conducted with support from the Army Research Office Grant DAAD 19-03-1-0261 and the National Science Foundation Grant CCF-0429481. Research supported in part by RGC Grant Nos. 7130/02P, 7046/03P, 7035/04P and 7035/04P and FRG/04-05/II-51.     

Joint Semiblind Frequency Offset and Channel Estimation for Multiuser MIMO-OFDM Uplink

A semiblind method is proposed for simultaneously estimating the carrier frequency offsets (CFOs) and channels of an uplink multiuser multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) system. By incorporating the CFOs into the transmitted symbols and channels, the MIMO-OFDM with CFO is remodeled into an MIMO-OFDM without CFO. The known blind method for channel estimation (Zeng and Ng in 2004) (Y. H. Zeng and T. S. Ng, ldquoA semi-blind channel estimation method for multi-user multi-antenna OFDM systems,rdquo IEEE Trans. Signal Process., vol. 52, no. 5, pp. 1419-1429, May 2004.) is then directly used for the remodeled system to obtain the shaped channels with an ambiguity matrix. A pilot OFDM block for each user is then exploited to resolve the CFOs and the ambiguity matrix. Two dedicated pilot designs, periodical and consecutive pilots, are discussed. Based on each pilot design and the estimated shaped channels, two methods are proposed to estimate the CFOs. As a result, based on the second-order statistics (SOS) of the received signal and one pilot OFDM block, the CFOs and channels are found simultaneously. Finally, a fast equalization method is given to recover the signals corrupted by the CFOs.     

The slot-coupled hemispherical dielectric resonator antenna with a parasitic patch: applications to the circularly polarized antenna and wide-band antenna

The aperture-coupled hemispherical dielectric resonator antenna (DRA) with a parasitic patch is studied rigorously. Using the Green's function approach, integral equations for the unknown patch and slot currents are formulated and solved using the method of moments. The theory is utilized to design a circularly polarized (CP) DRA and a wide-band linearly polarized (LP) DRA. In the former, the CP frequency and axial ratio (AR) can easily be controlled by the patch location and patch size, respectively, with the impedance matched by varying the slot length and microstrip stub length. It is important that the AR will not be affected when the input impedance is tuned, and the CP design is therefore greatly facilitated. For the wide-band LP antenna, a maximum bandwidth of 22% can be obtained, which is much wider than the previous bandwidth of 7.5% with no parasitic patches. Finally, the frequency-tuning characteristics of the proposed antenna are discussed. Since the parasitic patch can be applied to any DRAs, the method will find applications in practical DRA designs.     

A steerable complex wavelet construction and its application to image denoising.

This work addresses the design of a novel complex steerable wavelet construction, the generation of transform-space feature measurements associated with corner and edge presence and orientation properties, and the application of these measurements directly to image denoising. The decomposition uses pairs of bandpass filters that display symmetry and antisymmetry about a steerable axis of orientation. While the angular characterization of the bandpass filters is similar to those previously described, the radial characteristic is new, as is the manner of constructing the interpolation functions for steering. The complex filters have been engineered into a multirate system, providing a synthesis and analysis subband filtering system with good reconstruction properties. Although the performance of our proposed denoising strategy is currently below that of recently reported state-of-the-art techniques in denoising, it does compare favorably with wavelet coring approaches employing global thresholds and with an "Oracle" shrinkage technique, and presents a very promising avenue for exploring structure-based denoising in the wavelet domain.     

A study of the kinetics of nucleation in a palm oil melt

Nucleation from a supercooled melt of palm oil was studied by optical microscopy and differential scanning calorimetry (DSC). Despite being a multicomponent system, palm oil exhibits a rather simple cooling thermogram with its high- and low-T exotherms exclusively related to the “hard” and “soft” components of the oil. As the “hard” components are being removed, the position of the high-T peak shifts down toward the low-T peak with diminishing peak intensity, while the position of the latter remains virtually unchanged. At 288°K, nucleation in a palm oil melt is instantaneous. Its induction time-temperature curve shows an abrupt discontinuity at 297°K, which demarcates the occurrence of one polymorph from another. Nucleation data fit very well into the Fisher-Turnbull equation. Its larger activation free energy of nucleation is accompanied by lowering of the melting point and an increase in the crystal/melt interfacial free energy as compared to palm stearin. The slow rate of nucleation in palm oil is attributed to intermolecular interaction between its “hard” and “soft” components. Partly presented at the 1989 PORIM International Palm Oil Development Conference, September 5–9, Kuala Lumpur, Malaysia.     

Enhanced storage/operation stability of small molecule organic photovoltaics using graphene oxide interfacial layer

Graphene and graphene oxide (GO) have been applied in flexible organic electronic devices with enhanced efficiency of polymeric photovoltaic (OPV) devices. In this work, we demonstrate that storage/operation stability of OPV can be substantially enhanced by spin-coating a GO buffer layer on ITO without any further treatment. With a 2 nm GO buffer layer, the power conversion efficiency (PCE) of a standard copper phthalocyanine (CuPc)/fullerene (C₆₀) based OPV device shows about 30% enhancement from 1.5% to 1.9%. More importantly, while the PCE of the standard device drop to 1/1000 of its original value after 60-days of operation-storage cycles; those of GO-buffered device maintained 84% of initial PCE even after 132-days. Atomic force microscopy studies show that CuPc forms larger crystallites on the GO-buffered ITO substrate leading to better optical absorption and thus photon utilization. Stability enhancement is attributed to the diffusion barrier of the GO layer which slow down diffusion of oxygen species from ITO to the active layers.