New high‐luminance 50‐ and 43‐in. ACPDPs with an improved panel structure

New 50‐ and 43‐in. ACPDPs, which have been developed and commercialized in 2001, show high luminance with improved cell structure and higher Xe‐content gas. The specific features of the cell structure are “T”‐shaped electrodes and waffle‐structured ribs, which are same as those of the previous model. Both the cell structure and gas conditions have been optimized. New green and blue phosphors have also been adopted. As a result, the luminous efficacy has been improved up to 1.8 lm/W by using a black stripe. The peak luminance of the 50‐ and 43‐in. PDPs have reached 900 and 1000 cd/m², respectively, while the power consumption of the 50‐in. PDP has been decreased to 380 W, which is 20% lower than that of our previous 50‐in. PDP.     

Cationic or anionic sites? Selectivity optimization of ion-selective electrodes based on charged ionophores

The influence of ionic sites on the selectivities of ionophore-based ion-selective electrodes (ISEs) is described on the basis of a phase boundary potential model. The discussion presented here is significantly more general than previous ones. It is formulated for primary and interfering ions of any charges and it is valid for ISEs based on electrically charged or neutral ionophores. Furthermore, it also applies to membranes that contain more than one type of complex of the primary or interfering ion. It has been believed thus far that only ionic sites of the same charge sign as the primary ion improve the selectivities of ISEs based on charged ionophores. However, it is shown here that the charge sign of the ionic sites that give the highest potentiometric selectivities depends on the charge number of the primary and interfering ions and on the stoichiometry of their complexes with the ionophore. The validity of our model was confirmed experimentally with three ISEs based on different charged ionophores. ISEs based on lasalocid or 1-(N,N-dicyclohexylcarbamoyl)-2- (N,N-dioctadecylcarbamoyl)ethylphosphonic acid monomethyl ester (ETH 5639) as the ionophore responded selectively to Sr2+ or Mg2+, respectively, and discriminated well against other alkaline earth cations when their membranes contained anionic sites. These two electrodes are the first examples of ISEs based on charged ionophores for which maximum selectivities are obtained with membranes containing ionic sites with a charge sign opposite to that of the primary ion. On the other hand, the experimental F- selectivities of membranes based on oxo(5,10,15,20-tetraphenylporphyrinato)molybdenum-(V) improved gradually when the concentration of anionic sites was increased from 0 to 75 mol%. The selectivity-modifying influence of ionic sites for these three types of ISEs can be explained by considering the different stabilities of the 1:2 ion-ionophore complexes of the primary and of the interfering ions.     

ATP/GTP hydrolysis is required for oxazole and thiazole biosynthesis in the peptide antibiotic microcin B17

In the maturation of the Escherichia coli antibiotic Microcin B17, the product of the mcbA gene is modified posttranslationally by the multimeric Microcin synthetase complex (composed of McbB, C, and D) to cyclize four Cys and four Ser residues to four thiazoles and four oxazoles, respectively. The purified synthetase shows an absolute requirement for ATP or GTP in peptide substrate heterocyclization, with GTP one-third as effective as ATP in initial rate studies. The ATPase/GTPase activity of the synthetase complex is conditional in that ADP or GDP formation requires the presence of substrate; noncyclizable versions of McbA bind to synthetase, but do not induce the NTPase activity. The stoichiometry of ATP hydrolysis and heterocycle formation is 5:1 for a substrate that contains two potential sites of modification. However, at high substrate concentrations (>50Km) heterocycle formation is inhibited, while ATPase activity occurs undiminished, consistent with uncoupling of NTP hydrolysis and heterocycle formation at high substrate concentrations. Sequence homology reveals that the McbD subunit has motifs reminiscent of the Walker B box in ATP utilizing enzymes and of motifs found in small G protein GTPases. Mutagenesis of three aspartates to alanine in these motifs (D132, D147, and D199) reduced Microcin B17 production in vivo and heterocycle formation in vitro, suggesting that the 45 kDa McbD has a regulated ATPase/GTPase domain in its N-terminal region necessary for peptide heterocyclization.     

Stereochemical course of enzymatic enolpyruvyl transfer and catalytic conformation of the active site revealed by the crystal structure of the fluorinated analogue of the reaction tetrahedral intermediate bound to the active site of the C115A mutant of MurA

MurA (UDP-GlcNAc enolpyruvyl transferase), the first enzyme in bacterial peptidoglycan biosynthesis, catalyzes the enolpyruvyl transfer from phosphoenolpyruvate (PEP) to the 3'-OH of UDP-GlcNAc by an addition-elimination mechanism that proceeds through a tetrahedral ketal intermediate. The crystal structure of the Cys115-to-Ala (C115A) mutant of Escherichia coli MurA complexed with a fluoro analogue of the tetrahedral intermediate revealed the absolute configuration of the adduct and the stereochemical course of the reaction. The fluorinated adduct was generated in a preincubation of wild-type MurA with (Z)-3-fluorophosphoenolpyruvate (FPEP) and UDP-GlcNAc and purified after enzyme denaturation. The fluorine substituent stabilizes the tetrahedral intermediate toward decomposition by a factor of 10(4)-10(6), facilitating manipulation of the adduct. The C115A mutant of MurA was utilized to avoid the microheterogeneity that arises in the wild-type MurA from the attack of Cys115 on C-2 of FPEP in competition with the formation of the fluorinated adduct. The crystal structure of the complex was determined to 2.8 A resolution, and the absolute configuration at C-2 of the adduct was found to be 2R. Thus, addition of the 3'-OH of UDP-GlcNAc is to the 2-si face of FPEP, corresponding to the 2-re face of PEP. Given the previous observation that, in D2O, the addition of D+ to C-3 of PEP proceeds from the 2-si face [Kim, D. H., Lees, W. J., and Walsh, C. T. (1995) J. Am. Chem. Soc. 117, 6380-6381], the addition across the double bond of PEP is anti. Also, because the overall stereochemical course has been shown to be either anti/syn or syn/anti [Lees, W. J., and Walsh, C. T. (1995) J. Am. Chem. Soc. 117, 7329-7337], it now follows that the stereochemistry of elimination of H+ from C-3 and Pi from C-2 of the tetrahedral intermediate of the reaction is syn.     

Analysis of fluoromethyl group chirality establishes a common stereochemical course for the enolpyruvyl transfers catalyzed by EPSP synthase and UDP-GlcNAc enolpyruvyl transferase

The stereochemistry of transient methyl group formation at C-3 of phosphoenolpyruvate (PEP) in the reaction catalyzed by 5-enolpyruvylshikimate 3-phosphate (EPSP) synthase has been examined using the pseudosubstrates, (E)- and (Z)-3-fluorophosphoenolpyruvate (FPEP). Kinetically stable, chiral [1H, 2H]fluoromethyl analogs of the reaction tetrahedral intermediate were isolated and subjected to decomposition and stereochemical analysis. EPSP synthase was found to catalyze the 2-re face addition of solvent-derived hydrogen to C-3 of FPEP (corresponding to the 2-si face of PEP). Comparison of these data with prior analogous work on the MurA reaction [Kim, D.H., Lees, W.J., & Walsh, C. T. (1995) J. Am. Chem. Soc. 117, 6380-6381] suggests that the two enolpyruvyl transferases share a common stereochemical course, further strengthening the mechanistic, structural, and evolutionary relationship between the two enzymes.