The role of apoptosis in the modulation of colon carcinogenesis by dietary fat and by the organoselenium compound 1,4-phenylenebis(methylene)selenocyanate

Studies in laboratory animals have demonstrated that dietary supplements of organoselenium, 1,4-phenylenebis(methylene)selenocyanate (p-XSC) inhibit colon carcinogenesis. Diverse chemopreventive agents and clinically used anticancer drugs have been shown to induce apoptosis in colonic tumors. Inducing apoptosis is a key mechanism for the effectiveness of some chemopreventive agents; however, failure of apoptosis is now believed to contribute to the development of human cancer. In this study, we determined the number of apoptotic bodies in the colon tumors of rats fed a low-fat (LF) or a high-fat (HF) diet with or without p-XSC treatment. At 5 weeks of age, male F344 rats were divided into four groups, which were then maintained on one of the following diets: LF, 5% corn oil; HF, 23.5% corn oil; and LF and HF supplemented with 20 ppm p-XSC. In addition, the LF or HF diet with p-XSC supplements was administered either during the initiation stage or postinitiation. At 7 weeks of age, all rats except those intended for vehicle (normal saline) treatment were given 15 mg/kg of body weight of azoxymethane once weekly for 2 weeks. The animals were sacrificed 38 weeks after carcinogen treatment, and their colonic tumors were examined for appearance of apoptosis. The LF diet significantly increased the percentage of apoptosis as compared to the HF diet; the percentage of apoptosis in LF and HF diets were 12.4 and 2.9. The colon tumors that were present in the groups fed p-XSC together with a LF or a HF diet after carcinogen administration (postinitiation period) had a higher number of apoptotic bodies than those that were present in the animals fed p-XSC before carcinogen treatment (initiation period). The extent of apoptosis was weak when p-XSC was given with a HF diet (4.4%) during the initiation phase, but it was high significant when p-XSC was administered with LF diet (25.2%). Taken together, our data suggest that administration of LF diet supplemented with p-XSC increases apoptosis as compared to a HF diet alone.     

Performing Efficient NURBS Modeling Operations on the GPU

We present algorithms for evaluating and performing modeling operations on NURBS surfaces using the programmable fragment processor on the Graphics Processing Unit (GPU). We extend our GPU-based NURBS evaluator that evaluates NURBS surfaces to compute exact normals for either standard or rational B-spline surfaces for use in rendering and geometric modeling. We build on these calculations in our new GPU algorithms to perform standard modeling operations such as inverse evaluations, ray intersections, and surface-surface intersections on the GPU. Our modeling algorithms run in real time, enabling the user to sketch on the actual surface to create new features. In addition, the designer can edit the surface by interactively trimming it without the need for retessellation. Our GPU-accelerated algorithm to perform surface-surface intersection operations with NURBS surfaces can output intersection curves in the model space as well as in the parametric spaces of both the intersecting surfaces at interactive rates. We also extend our surface-surface intersection algorithm to evaluate self-intersections in NURBS surfaces.     

Compositional trend analysis on poly(phenylene ether) based thermoplastic elastomers

Detailed statistical trend analysis of thermoplastic elastomers based on poly (phenylene ether) (PPE), polystyrene (PS), ethylene vinyl acetate (EVA) and styrene‐ethylene‐butylene‐styrene (SEBS) was done through Design Expert software by Stat‐Ease. D optimal crossed design was followed to capture the interaction with the parameters. Effect of blend ratio, vinyl acetate (VA) content of EVA, molecular weight (MW) of SEBS and intrinsic viscosity (IV) of PPE on the blend performance (response) was studied in detail. Design of Experiment (DOE) analysis showed the “optimized formulation” of the blend. Increase in PPE‐polystyrene (PS) content increased tensile strength and modulus of the blend, followed by a decrease in strain at break. However, EVA had a reverse effect on tensile strength and modulus. Strain at break increased significantly with increasing SEBS content in the blend. Graphical and numerical optimization showed that superior mechanical properties (tensile strength, strain at break and modulus) could be achieved at VA content ～ 50% at a particular loading of EVA. Low MW SEBS was found to be more compatible with the other components of the blend. Mechanical properties of the quaternary blend were marginally affected with change in IV of PPE in the range of 0.33 to 0.46. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Sub‐Micron Anisotropic InP‐based III–V Semiconductor Material Deep Etching for On‐Chip Laser Photonics Devices

Two InP‐based III–V semiconductor etching recipes are presented for fabrication of on‐chip laser photonic devices. Using inductively coupled plasma system with a methane free gas chemistry of chlorine and nitrogen at a high substrate temperature of 250 °C, high aspect ratio, anisotropic InP‐based nano‐structures are etched. Scanning electron microscopy images show vertical sidewall profile of 90° ± 3°, with aspect ratio as high as 10. Atomic Force microscopy measures a smooth sidewall roughness root‐mean‐square of 2.60 nm over a 3 × 3 μm scan area. The smallest feature size etched in this work is a nano‐ring with inner diameter of 240 nm. The etching recipe and critical factors such as chamber pressure and the carrier plate effect are discussed. The second recipe is of low temperature (?10 °C) using Cl₂ and BCl₃ chemistry. This recipe is useful for etching large areas of III–V to reveal the underlying substrate. The availability of these two recipes has created a flexible III–V etching platform for fabrication of on‐chip laser photonic devices. As an application example, anisotropic InP‐based waveguides of 3 μm width are fabricated using the Cl₂ and N₂ etch recipe and waveguide loss of 4.5 dB mm^?1 is obtained.

     

Polyester composite water uptake and organic contaminant release affected by carbon nanofiber reinforcements

The incorporation of carbon nanofiber (CNF) into glass fiber (GF) composites is a potential route to extend polymer composite service‐life and enhance mechanical properties. Under nonstatic conditions, only limited information concerning water uptake and contaminant release properties of nanocomposite materials is currently available. Polyester composites containing GF and oxidized CNF were immersed in water for 30 days under nominal pressure at 23 °C, below the polymer's glass‐transition temperature. Water was analyzed and changed every three days to simulate water chemistry regeneration similar to exposures in flowing systems. Composites with oxidized CNF had greater water sorption capacity and leaching rates than CNF‐free composites. The total mass of organic contaminant released correlated with the amount of water sorbed by each composite (r² = 0.91), although CNF dispersion was found to vary greatly within composites. The greatest and least contaminant release rates were found for the polyester‐CNF and the polyester‐GF composites, respectively. While volatile aromatic resin solvents and stabilizer compounds were detected, their concentrations declined over the 30 day exposure period. We hypothesize that the hydrophilic nature of the oxidized CNF increased the water sorption capacity of the polyester composites. Additional studies are warranted that examine the impact of this phenomenon on composite mechanical and long‐term durability properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43724.     

Diethyl ether. 1963

Chlamydia psittaci is a significant cause of conjunctivitis in cats, but can be difficult to diagnose owing to the small number of organisms in conjunctival swabs. In the United Kingdom laboratory diagnosis is based on three techniques: isolation of the infectious organism, amplification of chlamydial DNA by the polymerase chain reaction (PCR) or the detection of anti-chlamydial antibodies by immunofluorescence assay. To determine the most sensitive method these techniques were compared in the field. The PCR based on previously published protocols was less sensitive than isolation, but by modifying the protocol its sensitivity was increased by a factor of 25 to 1250 and it was then more sensitive than isolation. The modified PCR detected chlamydia in samples containing non-infectious organisms. Serology was of limited use in predicting which cats shed C psittaci although seronegative cats were negative by PCR and isolation. The modified PCR was the most sensitive and robust method for confirming C psittaci infection in cases of conjunctivitis in pet cats.     

Cardiac morphology and left ventricular function in normotensive morbidly obese patients with and without congestive heart failure, and effect of weight loss

BACKGROUND: Prevention of hypothermia during abdominal surgery by insulating or heat-transferring methods has been the subject of numerous investigations. This study approaches the problem from a less discussed point of view, i.e. the effect of different surgical techniques on body temperature changes. METHODS: Body temperature was measured at 3 core and 6 skin points in 40 patients scheduled for cholecystectomy through open laparotomy or laparoscopy with pneumoperitoneum created and maintained with unwarmed carbon dioxide (CO2) insufflation. End-tidal CO2 was kept constant by adjustments of respiratory frequency. Anaesthesia, intravenous infusions, and draping of the patients were standardized. RESULTS: During the first 1 h of anaesthesia core temperatures decreased approximately by 0.7 degrees C and distal skin temperatures increased by 7 degrees C in both groups. At the end of surgery heat balance was similar in both groups. An increase of 2.5 1.min-1 in respiratory minute volume was needed to control end-tidal CO2 levels in the laparoscopy group during pneumoperitoneum which was maintained with a CO2 flow of 1.2 1.min-1 through the abdominal cavity. CONCLUSION: Laparoscopic technique with unwarmed carbon dioxide insufflation does not offer any advantage in terms of body temperature changes when compared to open surgery.     

GPU-accelerated minimum distance and clearance queries

We present practical algorithms for accelerating distance queries on models made of trimmed NURBS surfaces using programmable Graphics Processing Units (GPUs). We provide a generalized framework for using GPUs as coprocessors in accelerating CAD operations. By supplementing surface data with a surface bounding-box hierarchy on the GPU, we answer distance queries such as finding the closest point on a curved NURBS surface given any point in space and evaluating the clearance between two solid models constructed using multiple NURBS surfaces. We simultaneously output the parameter values corresponding to the solution of these queries along with the model space values. Though our algorithms make use of the programmable fragment processor, the accuracy is based on the model space precision, unlike earlier graphics algorithms that were based only on image space precision. In addition, we provide theoretical bounds for both the computed minimum distance values as well as the location of the closest point. Our algorithms are at least an order of magnitude faster and about two orders of magnitude more accurate than the commercial solid modeling kernel ACIS.