Nondestructive characterization of the mechanical strength of diffusion bonds. II. Application of a quasi-static spring model

It has been shown that the acoustic response of imperfect interfaces may be described by a quasi-static spring model. In the present paper, experimental data on the geometry of the contacts between two diffusion-bonded blocks have been used to determine the spring stiffness of such interfaces which have been correlated with experimentally determined ultrasonic reflection coefficients. The correlation between the theoretical reflection coefficient and the spring stiffness was found to be in excellent agreement with experimentally-observed values, if the disbonds are of infinitesimally small thickness. For disbonds of finite thickness, the agreement is less satisfactory. Reasons for the discrepancy in the latter case are unknown at the present time.     

Annihilation density distribution calculations for medically important positron emitters

The effect of positron range on the image-plane resolution of tomographic images is evaluated through calculations based on a model which employs beta-decay energy spectra and an empirical range formula. Predicted range distribution functions are compared with published measurements for three medically important positron emitters: (11 )C, (68)Ga, and (82)Rb. The effect of tomographic slice thickness on point-source annihilation distribution functions is also demonstrated. Line-spread functions are calculated using the model, for the above isotopes as well as for (18)F, (15)O, and (13)N. Image-plane resolution predictions are made for high-resolution positron cameras for various positron emitting isotopes with end-point energies up to 4 MeV.     

Imide-aryl ether benzoxazole random copolymers

Novel imide-aryl ether benzoxazole copolymers were prepared and their morphology and mechanical properties investigated. A key feature of these copolymers is the incorporation of a benzoxazole moiety by the use of 2,2′-bis[4-(3-aminophenoxy)phenyl]-6,6′-bibenzoxazole or 2,2′-bis[4-(4-aminophenoxy)-phenyl]-6,6′-bibenzoxazole as co-diamines in polyimide syntheses. The preparation of these diamines involved the nucleophilic aromatic substitution of 2,2′-bis(4-fluorophenyl)-6,6′-bibenzoxazole with either 3- or 4-aminophenol in the presence of K₂CO₃. The diamines were co-reacted with various compositions of pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (ODA) to synthesize the desired poly(amic acids). Films were cast and cured (350°C) to effect the imide formation, affording films with elongations between 40 and 110% and moduli in the 2000–2750 MPa range. The copolymers exhibited good dimensional (T_g in excess of 300°C) and thermal stability. Wide-angle X-ray diffraction measurements on the copolymers showed that the ordered morphology characteristic of PMDA/ODA polyimide was retained. Improvements in the auto-adhesion were observed, particularly in those copolymers which displayed a T_g.     

Use of the 15N natural abundance technique to quantify biological nitrogen fixation by woody perennials

Biological nitrogen fixation (BNF) associated with trees and shrubs plays a major role in the functioning of many ecosystems, from natural woodlands to plantations and agroforestry systems, but it is surprisingly difficult to quantify the amounts of N₂ fixed. Some of the problems involved in measuring N₂ fixation by woody perennials include: (a) diversity in occurrence, and large plant-to-plant variation in growth and nodulation status of N₂-fixing species, especially in natural ecosystems; (b) long-term, perennial nature of growth and the seasonal or year-to-year changes in patterns of N assimilation; and (c) logistical limitations of working with mature trees which are generally impossible to harvest in their entirety. The methodology which holds most promise to quantify the contributions of N₂ fixation to trees is the so-called `¹⁵N natural abundance' technique which exploits naturally occurring differences in ¹⁵N composition between plant-available N sources in the soil and that of atmospheric N₂. In this review we discuss probable explanations for the origin of the small differences in ¹⁵N abundance found in different N pools in both natural and man-made ecosystems and utilise previously published information and unpublished data to examine the potential advantages and limitations inherent in the application of the technique to study N₂ fixation by woody perennials. Calculation of the proportion of the plant N derived from atmospheric N₂ (%Ndfa) using the natural abundance procedure requires that both the ¹⁵N natural abundance of the N derived from BNF and that derived from the soil by the target N₂-fixing species be determined. It is then assumed that the ¹⁵N abundance of the N₂-fixing species reflects the relative contributions of the N derived from these two sources. The ¹⁵N abundance of the N derived from BNF (B) can vary with micro-symbiont, plant species/provenance and growth stage, all of which create considerable difficulties for its precise evaluation. If the%Ndfa is large and the ¹⁵N abundance of the N acquired from other sources is not several ¹⁵N units higher or lower than B, then this can be a major source of error. Further difficulties can arise in determining the ¹⁵N abundance of the N derived from soil (and plant litter, etc.) by the target plant as it is usually impossible to predict which, if any, non-N₂-fixing reference species will obtain N from the same N sources in the same proportions with the same temporal and spatial patterns as the N₂-fixing perennial. The compromise solution is to evaluate the ¹⁵N abundance of a diverse range of neighbouring non-N₂-fixing plants and to compare these values with that of the N₂-fixing species and the estimate of B. Only then can it be determined whether the contribution of BNF to the target species can be quantified with any degree of confidence. This review of the literature suggests that while the natural abundance technique appears to provide quantitative measures of BNF in tree plantation and agroforestry systems, particular difficulties may arise which can often limit its application in natural ecosystems.     

ABSORPTION AND DESORPTION TO AND FROM LIQUID FILMS ON INCLINED PLANES

Two published theoretical models are examined and applied to experimental results for absorption and desorption. The system used was CO₂/H₂O and studies were made for liquid film flow down inclined planes. Experimental results give “Reduced” values of mass ransfer rates.

Interferometric studies give interfacial concentration, penetration and film depths, and take-up of carbon dioxide. In the case of desorption the interferograms are distorted by “deflections.”

All the experimental values for absorption and desorption differ from those calculated from theoretical models.

Desorption is not a mirror image of absorption, and it is approximately 75% of the transfer rate of absorption over a wide operating range.

A comparison is made of the behaviour of static pools and flowing liquid films.     

Evaluation of imbedded fiber retraction phenomenological models for determining interfacial tension between molten polymers

In this work, the interfacial tension for several polymer pairs, namely polypropylene/polystyrene (PP/PS), PP/polycarbonate (PC), PP/polyamide 6 (PA-6) and low density polyethylene (LDPE) and ethylene vinyl alcohol copolymer (EVOH) was evaluated as a function of temperature using the imbedded fiber retraction method (IFR). Two phenomenological models were used and compared to infer the interfacial tension from the evolution of the imbedded fiber back into a sphere: [Carriere CJ, Cohen A, Arends CB. J Rheol 1989;33:681-9. [1] and Tjahjadi M, Ottino JM, Stone HA. AIChE J 1994;40:385-94. [2]]. It was shown that Carriere et al.'s model overestimates the value of interfacial tension whereas Tjahjadi et al.'s model leads to results that corroborate the ones obtained using other experimental methods. A method to further increase the accuracy of Tjahjadi et al.'s model was proposed. Using this method the interfacial tension for the different polymer pairs studied was evaluated and shown to decrease linearly with increasing temperature.     

Three-channel solar radiometer for the determination of atmospheric columnar water vapor

The design of a three-channel solar radiometer used to determine total columnar atmospheric water-vapor amounts is presented. The main channel is located in the 0.94-μm water-vapor band, and two other channels are located in adjacent nonabsorption regions of the solar spectrum and are used to remove scattering effects from the main channel. Water-vapor transmittance is determined by means of a modified Langley approach, and these transmittances are converted to columnar water vapor by means of a band model developed at the University of Arizona. Several cases are presented in which columnar water-vapor amounts are determined through the use of the instrument and method described here. These results are compared with sounding-balloon results. Tests of the method indicate that columnar water vapor may be retrieved with an uncertainty of less than 10%.     

Surface-enhanced Raman scattering nanosensors for <Emphasis Type="Italic">in vivo</Emphasis> detection of nucleic acid targets in a large animal model

Although nanotechnology has led to important advances in in vitro diagnostics, the development of nanosensors for in vivo detection remains very challenging. Here, we demonstrated the proof-of-principle of in vivo detection of nucleic acid targets using a promising type of surface-enhanced Raman scattering (SERS) nanosensor implanted in the skin of a large animal model (pig). The in vivo nanosensor used in this study involves the “inverse molecular sentinel” detection scheme using plasmonics-active nanostars, which have tunable absorption bands in the near infrared region of the “tissue optical window”, rendering them efficient as an optical sensing platform for in vivo optical detection. Ex vivo measurements were also performed using human skin grafts to demonstrate the detection of SERS nanosensors through tissue. In this study, a new core–shell nanorattle probe with Raman reporters trapped between the core and shell was utilized as an internal standard system for self-calibration. These results illustrate the usefulness and translational potential of the SERS nanosensor for in vivo biosensing.

Open image in new window

     

Examining student satisfaction with wholly online learning

Learner satisfaction has been shown to be positively correlated with quality of learning outcomes. An understanding of the factors that influence student satisfaction with online learning in a particular context can be used as an input to the appropriate design of learning environments, and for the provision of targeted support to students, with an aim to positively influence the student online learning experience. Following the mandatory inclusion of at least one wholly online unit of study in all undergraduate programs at Deakin University, a large 'experiences of learning online' (ELO) survey was undertaken to gauge students' perceptions of studying in the wholly online mode. A multivariate linear regression of all the questionnaire items was performed against an overall satisfaction item. Five items were found to significantly contribute to a model that explained approximately 70% of reported student satisfaction. Factors that were found to positively influence student satisfaction with studying a wholly online unit primarily related to how confident they felt about their ability to communicate and learn online, having a clear understanding of what was required to succeed in the unit and how well they thought they were performing in the unit. Other results are also reported.