Bio-layer management in anaerobic membrane bioreactors for wastewater treatment.

Membrane separation technology represents an alternative way to achieve biomass retention in anaerobic bioreactors for wastewater treatment. Due to high biomass concentrations of anaerobic reactors, cake formation is likely to represent a major cause of flux decline. In the presented research, experiments are performed on the effect of biomass concentration and level of gas sparging on the hydraulic capacity of a submerged anaerobic membrane bioreactor. Both parameters significantly affected the hydraulic capacity, with biomass exerting the most pronounced effect. After 50 days of continuous operation the critical flux remained virtually unchanged, despite an increase in membrane resistance, suggesting that biomass characteristics and hydraulic conditions determine the bio-layer formation rather than the membrane's fouling level. The concept of bio-layer management is introduced to describe the programmed combination of actions performed in order to control the formation of biomass layer over membranes.     

Role of Perceived Importance in Intergroup Contact.

Furthering G. W. Allport's (1954) contentions for optimal contact, the authors introduce a new construct: the perceived importance of contact. They propose that perceived importance is the best proximal predictor of contact's reduction of prejudice. If individuals have opportunities for contact at work or in the neighborhood, their chances to have intergroup acquaintances and friends increase. Intergroup contact among acquaintances and friends can be perceived as more or less important, which in turn determines intergroup evaluations. A 1st study shows that the new measure of perceived importance is indeed distinct from established quantity and quality indicators. The results are cross-validated in a 2nd study that also sheds light on the meaning of importance. In 3rd and 4th studies, structural equation analyses and a meta-analysis support the hypotheses. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synchronous Full-Scan for Asynchronous Handshake Circuits

Handshake circuits form a special class of asynchronous circuits that has enabled the industrial exploitation of the asynchronous potential such as low power, low electromagnetic emission, and increased cryptographic security. In this paper we present a test solution for handshake circuits that brings synchronous test-quality to asynchronous circuits. We add a synchronous mode of operation to handshake circuits that allows full controllability and observability during test. This technique is demonstrated on some industrial examples and gives over 99% stuck-at fault coverage, using test-pattern generators developed for synchronous circuits. The paper describes how such a full-scan mode can be achieved, including an approach to minimize the number of dummy latches in case latches are used in the data path of the handshake circuit.     

The measurement of the diffusion coefficient and the sorption isotherm of water in paint films

An experimental technique together with a numerical model is proposed with which the diffusion coefficient and the sorption isotherm of water in paint can be measured. Inside a closed vessel, paint films are on stainless-steel plates. Water is present as water vapour in the air and in the paint. After blowing dry or wet air through the vessel for some time, the situation moves to a new equilibrium. The relative humidity of the air inside the vessel is measured as a function of time. From fitting the theoretical/numerical model against the experimental values, follow the diffusion coefficient and the sorption isotherm of water in the paint. The results show large scattering. When the independently measured sorption isotherm is used as an input parameter in the model, the fitting procedure gives much smaller scattering for the diffusion coefficient.     

Effect of alendronate treatment on the osteoclastogenic potential of bone marrow cells in mice

The expression of cytokeratins (CK), involucrin, vimentin, CD34, and alpha-smooth-muscle actin was studied in fetal and adult hair follicles. The first stage of the developing hair follicle is characterized by palisaded, elongated epithelial cells budding from the epidermal basal layer. These cells express CK5/6, CK14, CK17, CK19, and vimentin. During the following weeks of gestation, different structures in the developing hair follicle can be identified and characterized. The matrical cells display only CK19. The keratinocytes of the outer root sheath express CK5/6, CK14, CK17, CK19, and involucrin; those of the inner root sheath, CK4, CK18, and involucrin; those of the isthmus, the same profile as the ORS. In the infundibulum, the basal-layer keratinocytes express CK5/6, CK14, CK17, and CK19, whereas in the suprabasal layers CK1, CK4, CK10, CK14, and CK17 are seen. The adult hair follicle in anagen fails to express CK19 in the matrical cells and isthmus and both CK17 and CK19 in the infundibulum. These profiles of intermediate filaments and other markers appear to be potentially useful in categorizing neoplasms with apparent follicular differentiation.     

Clinical chemistry of common apolipoprotein E isoforms

Apolipoprotein E plays a central role in clearance of lipoprotein remnants by serving as a ligand for low-density lipoprotein and apolipoprotein E receptors. Three common alleles (apolipoprotein E(2), E(3) and E(4)) give rise to six phenotypes. Apolipoprotein E(3) is the ancestral form. Common apolipoprotein E isoforms derive from nucleotide substitutions in codons 112 and 158. Resulting cysteine-arginine substitutions cause differences in: affinities for low-density lipoprotein and apolipoprotein E receptors, low-density lipoprotein receptor activities, distribution of apolipoprotein E among lipoproteins, low-density lipoprotein formation rate, and cholesterol absorption. Accompanying changes in triglycerides, cholesterol and low-density lipoprotein may promote atherosclerosis development. Over 90% of patients with familial dysbetalipoproteinaemia have apolipoprotein E(2)/E(2). Apolipoprotein E(4) may promote atherosclerosis by its low-density lipoprotein raising effect. Establishment of apolipoprotein E isoforms may be important for patients with diabetes mellitus and several non-atherosclerotic diseases. Apolipoprotein E phenotyping exploits differences in isoelectric points. Isoelectric focusing uses gels that contain pH 4-7 ampholytes and urea. Serum is directly applied, or prepurified by delipidation, lipoprotein precipitation or dialysation. Isoelectric focusing is followed by immunofixation/protein staining. Another approach is electro- or diffusion blotting, followed by protein staining or immunological detection with anti-apolipoprotein E antibodies and an enzyme-conjugated second antibody. Apolipoprotein E genotyping demonstrates underlying point mutations. Analyses of polymerase chain reaction products are done by allele-specific oligonucleotide probes, restriction fragment length polymorphism, single-stranded conformational polymorphism, the primer-guided nucleotide incorporation assay, or denaturating gradient gel electrophoresis. Detection with primers that either or not initiate amplification is performed with the amplification refractory mutation system. Disparities between phenotyping and genotyping may derive from isoelectric focusing methods that do not adequately separate apolipoprotein E posttranslational variants, storage artifacts or faint isoelectric focusing bands.     

A 3.3-mW /spl Sigma//spl Delta/ modulator for UMTS in 0.18-/spl mu/m CMOS with 70-dB dynamic range in 2-MHz bandwidth

A quadrature fourth-order, continuous-time, /spl Sigma//spl Delta/ modulator with 1.5-b quantizer and feedback digital-to-analog converter (DAC) for a universal mobile telecommunication system (UMTS) receiver chain is presented. It achieves a dynamic range of 70 dB in a 2-MHz bandwidth and the total harmonic distortion is -74 dB at full-scale input. When used in an integrated receiver for UMTS, the dynamic range of the modulator substantially reduces the need for analog automatic gain control and its tolerance of large out-of-band interference also permits the use of only first-order prefiltering. An IC including an I and Q /spl Sigma//spl Delta/ modulator, phase-locked loop, oscillator, and bandgap dissipates 11.5 mW at 1.8 V. The active area is 0.41 mm/sup 2/ in a 0.18-/spl mu/m 1-poly 5-metal CMOS technology.     

Synthesis of Hexp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-Manp-(1-->O) (CH2)7 CH3 probes for exploration of the substrate specificity of glycosyltransferases: Part II, Hex = 3-O-methyl-beta-D-Gal, 3-deoxy-beta-D-Gal, 3-deoxy-3-fluoro-beta-D-Gal, 3-amino-3-deoxy-beta-D-Gal, beta-D-Gul, alpha-L-Alt, or beta-L-Gal

Seven analogues of the trisaccharide beta-D-Galp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-Manp-(1-->O)(CH 2)7CH3 have been synthesized as potential substrates for glycosyltransferases involved in the chain-termination of N-acetyllactosamine-type N-glycans. These compounds include: 3-O-methyl-beta-D-Galp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-Manp -(1-->O) (CH2)7CH3, 3-deoxy-beta-D-Galp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-Manp-(1 -->O) (CH2)7CH3, 3-deoxy-3-fluoro-beta-D-Galp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-M anp- (1-->O)(CH2)7Ch3, 3-amino-3-deoxy-beta-D-Galp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-Ma np- (1-->O)(CH2)7CH3, beta-D-Gulp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-Manp-(1-- >O)(CH2)7CH3, beta-L-Galp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-Manp-(1-->O)(CH 2)7CH3, and alpha-L-Altp-(1-->4)-beta-D-GlcpNAc-(1-->2)-alpha-D-Manp-(1- ->O) (CH2)7CH3. All trisaccharides were obtained by condensation of suitably modified glycosyl donors based on imidates or thioglycosides with the same disaccharide acceptor, octyl 3,4,6-tri-O-benzyl-2-O-(3,6-di-O-benzyl-2-deoxy-2-phthalimido-beta-D- glucopyranosyl)-alpha-D-mannopyranoside, followed by deprotection.     

Analysis of 24,444 surgical specimens accessioned over 55 years in an ophthalmic pathology laboratory

PURPOSE: To summarize the pathologic diagnoses of a large number of surgically-obtained specimens over an extended time period in a single ophthalmic pathology laboratory. METHODS: We analyzed the records of 24,444 surgically obtained specimens accessioned in the L.F. Montgomery Ophthalmic Pathology Laboratory, Emory University, Atlanta, GA between May 1941 and December 1995. Age, sex, topography, clinical procedure, and histologic diagnosis were entered into a database using the modified SNOMED coding system. The diagnosis of the surgically enucleated eyes were analyzed with respect to years of enucleation. RESULTS: The most common topographic area associated with a histologic diagnosis was the cornea (39.3%), followed by lens (16.0%), vitreous (12.0%), uvea (9.8%), eyelids (8.0%), conjunctiva (7.7%), retina (7.7%), and orbit (2.1%). The relative proportion of vitreous specimens has continuously increased and became the most common surgical specimen in 1995. The most common underlying disease of surgically enucleated eyes is trauma (40.9%), followed by ocular neoplasia (24.2%), 'surgical' diseases of the cornea, lens and retina including glaucoma (17.3%), vascular diseases (6.7%), and inflammatory conditions (6.7%). The relative frequency of trauma and ocular inflammation as a cause of enucleation decreased significantly (p < 0.05) over the time of the study period while the relative proportion of ocular neoplastic processes increased (p < 0.0001). CONCLUSIONS: The availability of new surgical techniques has caused a change in the relative frequencies of different ocular specimens submitted for histologic examination.