Exposure to particles from laser printers operating within office workplaces

While recent research has provided valuable information as to the composition of laser printer particles, their formation mechanisms, and explained why some printers are emitters while others are low emitters, questions relating to the potential exposure of office workers remained unanswered. In particular, (i) what impact does the operation of laser printers have on the background particle number concentration (PNC) of an office environment over the duration of a typical working day? (ii) What is the airborne particle exposure to office workers in the vicinity of laser printers? (iii) What influence does the office ventilation have upon the transport and concentration of particles? (iv) Is there a need to control the generation of, and/or transport of particles arising from the operation of laser printers within an office environment? (v) What instrumentation and methodology is relevant for characterizing such particles within an office location? We present experimental evidence on printer temporal and spatial PNC during the operation of 107 laser printers within open plan offices of five buildings. The 8 h time-weighted average printer particle exposure is significantly less than the 8 h time-weighted local background particle exposure, but that peak printer particle exposure can be greater than 2 orders of magnitude higher than local background particle exposure. The particle size range is predominantly ultrafine (<100 nm diameter). In addition we have established that office workers are constantly exposed to nonprinter derived particle concentrations, with up to an order of magnitude difference in such exposure among offices, and propose that such exposure be controlled along with exposure to printer derived particles. We also propose, for the first time, that peak particle reference values be calculated for each office area analogous to the criteria used in Australia and elsewhere for evaluating exposure excursion above occupational hazardous chemical exposure standards. A universal peak particle reference value of 2.0 × 10(4) particles cm(-3) has been proposed.     

Single Soybean Seed NMR Calibration for Oil Measurement Using Commercial Cooking Oils

Development of high oil soybeans would reduce the cost of soybean oil production for biodiesel or edible oil applications. An accurate determination of soybean seed oil concentration is essential especially when developing superior cultivars with increased seed oil content. The objective of this study was to develop an oil measurement method for single seeds using NMR spectrometry. An NMR spectrometer was calibrated using commercial cooking oil. Fifteen cultivars of known mean oil content were used to evaluate the calibration curves. The calibration curves developed had a correlation coefficient of 0.99. It was found that soybean and corn oil gave identical results over the calibrated interval.     

Interpersonal subtypes and change of interpersonal problems in the treatment of patients with generalized anxiety disorder: A pilot study.

Interpersonal problems are highly relevant to the treatment of generalized anxiety disorder (GAD) patients. Previous studies using the Inventory of Interpersonal Problems identified several interpersonal subtypes in GAD patients. In this study, we wanted to replicate earlier findings of interpersonal subtypes in GAD. We investigated whether these interpersonal subtypes are characterized by different types of interpersonal problems and different levels of interpersonal distress, and we further examined whether they differed with regard to improvement of interpersonal problems after short-term treatment. This study is based on results from a randomized controlled trial that investigated short-term treatments in GAD outpatients. For secondary analysis, interpersonal subtypes were identified by cluster analysis and Inventory of Interpersonal Problems profiles were calculated for both the total sample (N = 52) and the interpersonal subtypes using the Structural Summary Method for Circumplex Data. This study confirmed previous results demonstrating the existence of interpersonal subtypes in GAD. Four interpersonal subtypes were identified: Overly Nurturant, Intrusive, Socially Avoidant, and Nonassertive. Short-term treatment significantly improved interpersonal problems (d = 0.46) within the total GAD sample. Interestingly, the effect sizes of the four clusters differed considerably (d = 0.19–1.24) and the clusters displayed different changes in the two circumplex axes Dominance and Nurturance. Our study indicates that change of interpersonal problems needs to be specifically analyzed, even within homogenous diagnostic groups. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

A statistical description of stimulated Brillouin scattering beamcombination efficiency

The mutual coherence between two stimulated Brillouin signals produced by undepleted pump beams that are partially overlapped is studied. The mutual coherence of the stimulated-Brillouin-scattered beams determines the efficiency with which the two beams can be combined. The statistical properties of the mutual coherence are calculated. The mechanism for coupling of two stimulated-Brillouin-scattering outputs is four-wave mixing. Mutual coherence is found to depend on the pump beam's pulse duration, the medium's phonon lifetime, and the degree of overlap between the laser pump beams     

Trapped thrombus in a patent foramen ovale

A survey of the orthopaedic casualties evacuated (casevacs) to the Royal Hospital Haslar between November 1995 and April 1996 was performed. A total of 464 service persons and civilians were casevaced. Orthopaedic cases amounted to 55% of all evacuations. Of these, 54% were British Army personnel. Conditions necessitating casevac were classified as either acute, (occurring during the deployment), or chronic (where the condition was present prior to deployment). Of the acute cases, there was an even mix between bony and soft tissue injuries (STIs). Sporting activities were the commonest cause of injury. The condition had been present prior to deployment in 16% of cases. Half of these were considered to have been unfit for deployment. Strategies for prevention of unnecessary casevacs are discussed.     

The satellite RNA of barley yellow dwarf virus-RPV is supported by beet western yellows virus in dicotyledonous protoplasts and plants

The subgroup II luteovirus barley yellow dwarf virus-RPV (BYDV-RPV) acts as a helper virus for a satellite RNA (satRPV RNA). The subgroup II luteovirus beet western yellows virus (BWYV) and the ST9-associated RNA (ST9a RNA), a BWYV-associated RNA that encodes a polymerase similar to those of subgroup I luteoviruses, were assayed for their ability to support replication of satRPV RNA. SatRPV RNA was replicated in tobacco protoplasts in the presence of BWYV RNA or a mixture of BWYV plus the ST9a RNA, but not in the presence of ST9a RNA alone. ST9a RNA stimulated BWYV RNA accumulation which, in turn, increased the accumulation of satRPV RNA. SatRPV RNA was encapsidated in BWYV capsids primarily as circular monomers, which differs from the linear monomers found in BYDV (RPV + PAV) particles. SatRPV RNA was transmitted to Capsella bursa-pastoris plants by aphids only in the presence of BWYV and ST9a RNA. SatRPV RNA reduced accumulation of both BWYV helper and ST9a nonhelper RNAs in plants but did not affect symptoms. The replication of satRPV RNA only in the presence of subgroup II luteoviral RNAs but not in the presence of RNAs with subgroup I-like polymerase genes, in both monocotyledonous and dicotyledonous hosts, suggests that the specificity determinants of satRPV RNA replication are contained within the polymerase genes of supporting viruses rather than in structural genes or host plants.     

Quantitative Imaging of the Magnetic Configuration of Modulated Nanostructures by Electron Holography

By means of off‐axis electron holography the local distribution of the magnetic induction within and around a poly‐crystalline Permalloy (Ni₈₁Fe₁₉) thin film is studied. In addition the stray field above the sample is measured by magnetic force microscopy on a larger area. The film is deposited on a periodically nanostructured (rippled) Si substrate, which was formed by Xe⁺ ion beam erosion. This introduces the periodical ripple shape to the Permalloy film. The created ripple morphology is expected to modify the magnetization distribution within the Permalloy and to induce dipolar stray fields. These stray fields play an important role in spinwave dynamics of periodic nanostructures like magnonic crystals. Micromagnetic simulations estimate those stray fields in the order of only 10 mT. Consequently, their experimental determination at nanometer spatial resolution is highly demanding and requires advanced acquisition and reconstruction techniques such as electron holography. The reconstructed magnetic phase images show the magnetized thin film, in which the magnetization direction follows mainly the given morphology. Furthermore, a closer look to the Permalloy/carbon interface reveals stray fields at the detection limit of the method in the order of 10 mT, which is in qualitative agreement with the micromagnetic simulations.     

Observation of free surface-induced bending upon nanopatterning of ultrathin strained silicon layer

We provide evidence of nanopatterning-induced bending of an ultrathin tensile strained silicon layer directly on oxide. This strained layer is achieved through the epitaxial growth of silicon on a Si(0.84)Ge(0.16) virtual substrate and subsequent transfer onto a SiO(2)-capped silicon substrate by combining hydrophilic wafer bonding and the ion-cut process. Using high resolution transmission electron microscopy, we found that the upper face of the strained silicon nanostructures fabricated from the obtained heterostructure using electron beam lithography and dry reactive ion etching displays a concave shape. This bending results from the free-surface-induced strain relaxation, which implies lattice out-of-plane expansion near the edges and concomitant contraction at the center. For a ～ 110 nm × 400 nm × 20 nm nanostructure, the bending is associated with an angle of 1.5° between the [Formula: see text] vertical atomic planes at the edges of the ～ 110 nm side. No bending is, however, observed at the strained Si/SiO(2) interface. This phenomenon cannot be explained by the classical Stoney's formula or related formulations developed for nanoscale thin films. Here we employed a continuum mechanical approach to describe these observations using three-dimensional numerical calculations of relaxation-induced lattice displacements.