Finite element study of the effect of material properties on reaction forces produced by solitary wave propagation in granular chains

The response of a granular chain to impulse loading was investigated as a function of material properties. Using COMSOL Multiphysics, the elastic modulus and density of the grains were varied while the piston and force sensor properties remained fixed. The result of solitary wave propagation through the granular chain was recorded at the force sensor as a series of reaction force waves. It was found that wave velocity and amplitude increased with elastic modulus. Increasing density caused a decrease in wave velocity and an increase in amplitude. In addition, higher density granular chains exhibited a decrease in the number of waves in their respective reaction force wave trains. LS-DYNA was then used to explore the response of a variety of ceramic and metallic granular chains. Density, elastic modulus, and Poisson’s ratio were all set to representative values for the respective material. It was found that solitary wave development and decay occurred at different rates for different materials. In addition, the kinetic energy decay of the impactor was slower for glass compared with tungsten. Finally, it was shown that a single reaction force wave with no train could be produced by impacting a high density, high modulus chain such as tungsten with a glass piston, which has relatively low density and elastic modulus. Increasing impact velocity for this case resulted in a single high-amplitude wave with no train.     

Systems and Virtualization Management: Standards and the Cloud. A report on SVM 2013

Hosted by the Distributed Management Task Force (DMTF) and collocated with the International Conference on Network and Service Management, SVM 2013 was the seventh International DMTF Academic Alliance Workshop on Systems and Virtualization Management (SVM). SVM 2013 was held in Zurich, Switzerland on October 18, 2013. Featuring seven presentations surrounding cloud, OpenSAF, open standards, and CIM, SVM 2013 also included a joint poster session with another workshop, an invited talk by a guest speaker, a keynote speech given by the DMTF President, Jeff Hilland, and closed with an informal interactive group discussion.     

Minor components ofLesquerella fendleri seed oil

Routine analysis of fatty ester fractions ofLesquerella fendleri oil suggested the presence of epoxy compounds and other minor components. By a combination of open silica column and high performance liquid chromatography (HPLC) fractionations of the methyl esters prepared from the oil, these constitutents were isolated and then characterized by thin-layer chromatography-mass spectrometry (GC-MS—electron ionization, EI, and chemical ionization, CI) and nuclear magnetic resonance (NMR—¹H and¹³C). Three epoxy acids, 15,16-epoxy-9,12-octadecadienoic, 9,10-epoxy-12-octadecenoic and 9,10-epoxy-octadecanoic, were found. Hydroxy acids present included a C-22 homologue of lesquerolic acid (16-hydroxy-12-docosenoic acid) and 14,15-dihydroxy-tricosanoic acid. Other minor ocmponents included four sterols, brassicasterol, campesterol, β-sitosterol and stigmasterol, and a series of saturated and unsaturated fatty acids up to C30. Visiting postdoctoral scientist sponsored by the government of India.     

Friction stir scribe welding technique for dissimilar joining of aluminium and galvanised steel

Friction stir scribe technology, a derivative of friction stir welding, was applied for the dissimilar lap welding of an aluminium alloy and galvanised mild steel sheets. During the process, the rotating tool with a cobalt steel scribe first penetrated the top material – aluminium – and then the scribe cuts the bottom material – steel. The steel was displaced into the upper material to produce a characteristic hook feature. Lap welds were shear tested, and their fracture paths were studied. Welding parameters affected the welding features, including hook height, which turned out to be highly related to fracture position. Therefore, in this paper, the relationships among welding parameters, hook height, joint strength and fracture position are presented. In addition, the influence of zinc coating on joint strength was also studied.     

New Standards Release Sets Stage for 5G Future

Over the past year or so,wireless companies have begun to roll out fifth-generation (5G),the latest generation wireless network[1].For today's consumers,moving ...     

Tributary confluences are dynamic thermal refuges for a juvenile salmonid in a warming river network

As rivers warm, cold‐water fish species may alleviate thermal stress by moving into localized thermal refuges such as cold‐water plumes created by cool tributary inflows. We quantified use of two tributary confluence plumes by juvenile steelhead, Oncorhynchus mykiss, throughout the summer, including how trout positioned themselves in relation to temperature within confluence plumes. At two confluences, Cedar and Elder creeks, along the South Fork Eel River, California, USA, we monitored temperatures using in situ logger grids throughout summer 2016. Fish were counted within confluences via snorkel surveys five times a day on 5 days at each site. We found diel and seasonal dependence on confluence use by steelhead, especially at the Cedar Creek confluence, where mainstem temperatures exceeded 28°C. At this site, fish moved into the confluence on the warmest days and warmest times of the day. Fish observed within the Cedar Creek confluence plume were most common in locations between 20–22°C, rather than the coldest locations (14.5°C). At Elder Creek, where mainstem temperatures remained below 24°C, there was little relationship between mainstem temperature and steelhead presence in the confluence plume. At both sites, steelhead distribution within plumes was influenced by spatial variation of temperature and mean temperature in surveyed grid cells. Our results show that cool tributaries flowing into warmer mainstem reaches (over 24°C) likely create important thermal refuges for juvenile steelhead. As mainstem rivers warm with climate change, cool‐water tributary inputs may become more important for sustaining cold‐water salmonids near the southern end of their range.     

Defining a complex intervention: The development of demarcation criteria for “meditation”.

The authors used a 5-round Delphi study with a panel of 7 experts in meditation research to achieve agreement on a set of criteria for a working definition of “meditation” for use in a comprehensive systematic review of the therapeutic use of meditation. Participants agreed that essential to a meditation practice is its use of (a) a defined technique, (b) logic relaxation, and (c) a self-induced state. Participants also agreed that a meditation practice may (d) involve a state of psychophysical relaxation somewhere in the process; (e) use a self-focus skill or anchor; (f) involve an altered state/mode of consciousness, mystic experience, enlightenment or suspension of logical thought processes; (g) be embedded in a religious/spiritual/philosophical context; or (h) involve an experience of mental silence. The results of this study provide insight into the challenges faced by researchers who want to demarcate meditative practices from nonmeditative practices, and they describe an approach to this problem that may prove useful for researchers trying to operationalize meditation in the context of comparative research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)