The comparative effect of a mixed urea,ammonium nitrate,ammonium sulphate granular formulation on the efficiency of N recovery by perennial ryegrass

The¹⁵N isotope was used to study the mode of action of individual nitrogen sources in a 30% urea:30% ammonium nitrate: 10% ammonium sulphate:30% filler (w/w) granular fertilizer for perennial ryegrass in a greenhouse pot experiment. The fertilizer consisted of two types of granules, one containing 80% urea and 20% filler and the second containing 48% ammonium nitrate (AN), 16% ammonium sulphate (AS) and 36% filler. In addition the effect of dolomite compared with silica as the filler was investigated on nitrogen recovery from the 30:30:10:30 formulation.Dolomite adversely affected the recovery of nitrate N from the system and evidence suggested that MgCO₃ was the active component. Granules containing dolomite resulted in a lower dry-matter yield than those containing silica, however the difference was not significant as nitrate contributed only 20% of the N in the formulation. AN gave the greatest DM yield and urea the lowest with AS being intermediate. The¹⁵N budget in shoots, roots and soil indicated that only 65% of the N from urea was recovered at the end of the experiment compared with 86% for AN and 91% for AS. The dry-matter yield of the 30:30:10:30 formulation using silica as the filler was intermediate between urea and AN; however, the apparent N recovery was significantly higher than expected from the sum of the individual components. The use of¹⁵N labelling indicated that using separate granules for ammonium N and urea the recovery of urea was improved by 11% in the triple N mixture when both AN and AS were present in the second granule compared to the recovery on its own. The enhanced recovery of urea appeared to be a function of AN and AS acting together as neither source in double combination with urea had any effect on urea N recovery.Urea enhanced the recovery of nitrate N by 10% but decreased the recovery of AS by 6% (in the 30:30:10:30 formulation) in comparison with the single sources on their own. The results indicate that interactions can occur between N sources even when they are physically separated by being in different granules.     

Applications of laser Raman microprobe spectroscopy to the characterization of coals and cokes

Optical microscopy is widely used in the characterization of coals and cokes. This Paper shows that the laser Raman microprobe (MOLE) which combines an optical microscope and a Raman spectrometer can provide useful additional information. Three main areas were investigated: identification of minerals in coal and coke; structural characterization of coals and cokes; and the interaction of inorganic additives and coal. Where possible, the results were compared with conventional optical microscopy measurements whereby it was shown that the optical texture and Raman spectra of cokes are not closely related. The Raman spectra of high temperature cokes were used to estimate the size of microcrystalline regions.     

Diastereoselective Heterogeneous Catalytic Hydrogenation of Aromatic or Heteraromatic Compounds

The diastereoselective hydrogenation catalyzed by heterogeneous metallic catalysts uses a covalently bound chiral auxiliary to induce the chirality. It remains an active synthetic methodology in the asymmetric synthesis of chiral products and may proceed with high diastereoselectivity. This review describes recent examples using this method, such as hydrogenation of C=C, C=O, and C=N bonds. The use of a chiral auxiliary group has also been successfully applied to the hydrogenation of aromatic and heteroaromatic rings. The choice of the chiral auxiliary was found to play a key role in the asymmetric hydrogenation. The results could be explained in terms of steric effect, with a preferred conformation of the adduct substrate and the addition occurring from the less bulky side. The catalytic metal, the support and the presence of additives were also found to have a significant influence.     

Investigation of Flow Patterns in Continuous‐flow Stirred Vessels by Laser Doppler Velocimetry

The flow structure of a continuous‐flow reactor stirred by a Rushton turbine was investigated by laser Doppler velocimetry for two different mean residence time‐mixing time ratios. Velocity measurements were obtained for two inlet locations, corresponding to the incoming liquid stream being fed co‐currently or counter‐currently to the flow discharged by the turbine. In all investigated configurations and for all operating conditions, it was found that the flow disruption caused by the incoming liquid stream was observable mainly in the first vessel quarter, which followed the feed‐tube plane. From comparison of the velocities encountered in the various planes in the continuous‐flow reactor to the velocities of the batch reactor, it was also concluded that it may be possible to intensify the usage of the turbine‐stirred vessel by decreasing the characteristic times ratio, without considerable flow by‐pass and/or short‐circuiting problems.     

High-temperature oxidation of a rapidly solidified amorphous Ta-Ir alloy

The oxidation products formed at 500 and 700°C on an amorphous Ta-44.5 at% Ir alloy in an Ar-0.1% O₂ gas mixture were characterized using SEM, XRD, EPMA, TEM, STEM, AES, and XPS. Initially, a thin (3–4 nm) layer of Ta₂O₅ formed at the surface of the alloy. Continued growth of the Ta₂O₅, which occurred very rapidly, involved diffusion of oxygen anions from the Ta₂O₅/gas interface to the alloy/Ta₂O₅ interface, where tantalum was selectively oxidized. Because the oxide grew more quickly than iridium could diffuse back into the alloy, the iridium coalesced into platelets of crystalline iridium-rich alloy that were oriented approximately parallel to the oxide/alloy interface, and which became embedded in a matrix of Ta₂O₅. The unoxidized core remained in the glassy state. The oxidation process and/or the dissolution of oxygen into the unoxidized alloy caused the alloy to become embrittled.     

An examination of the Internet’s development as a disabling environment in the context of the social model of disability and anti-discrimination legislation in the UK and USA

Research indicates that inaccessible website design persists despite the existence of anti-discrimination legislation and the influence of the social model of disability on policy development. In this paper, the concept of universal access is examined in the light of the social model of disability in relation to both the physical and virtual environments. The manner in which disability is often deemed a design afterthought is highlighted. The need for universal access is then placed alongside a discussion of access to the Internet in relation to an ageing population and people with cognitive difficulties. Subsequently, anti-discrimination provisions are analysed in relation to how they support designers’ focus on an accepted normality to which reasonable adjustments need to be made, rather than the acquisition of full universal access.     

Leadership and justice: Increasing non participating users’ assessment of an IT through passive participation

Allowing users to actively participate in the development and implementation of a new IS is supposed to increase their satisfaction with it. This type of participation, representing aspects relating to distributive and procedural justice, is increasingly impractical in current organizational settings, because many IS are used by thousands of employees and having them involved is impossible. Nonetheless, there are still benefits to be gained in other ways. Extrapolating from interactional justice, we proposed a passive participation method of engaging users. Its effect was tested in a large company in the USA and proved effective. Interactional justice, the perception of fairness in the way that people were treated at an interpersonal level, was found to increase user assessment of the value of their IS. Implications and expansions to interactional justice theory and how this antecedent affects IS implementation are discussed.     

Digital Intuition: Applying Common Sense Using Dimensionality Reduction

Understanding the world we live in requires access to a large amount of background knowledge: the commonsense knowledge that most people have and most computer systems don't. Many of the limitations of artificial intelligence today relate to the problem of acquiring and understanding common sense. The Open Mind Common Sense project began to collect common sense from volunteers on the Internet starting in 2000. The collected information is converted to a semantic network called ConceptNet. Reducing the dimensionality of ConceptNet's graph structure gives a matrix representation called AnalogySpace, which reveals large-scale patterns in the data, smoothes over noise, and predicts new knowledge. Extending this work, we have created a method that uses singular value decomposition to aid in the integration of systems or representations. This technique, called blending, can be harnessed to find and exploit correlations between different resources, enabling commonsense reasoning over a broader domain.     

Conception of a CATV-based MAN

The objective of this paper is to propose an architecture for aCAble TeleVision (CATV) network, capable of supporting two-way transmission. This evolution is necessary for the survival of the CATV industry in an era of deregulation and of the development of the B-ISDN by the telecommunications companies. A communication transactional service is then considered and performance analysis is done under realistic assumptions.