Oil entrainment in vertical refrigerant pipingEntraînement de l''huile dans les tuyauteries frigorifiques verticales

The aim of this study is to investigate the required refrigerant speed, hence minimum refrigeration load, for carrying the lubricating oil up in vertical sections of refrigerant lines. It is assumed that the downward flow of the thin oil layer over the inner surface of the riser due to gravity is to be balanced with the upward flow of the oil film due to the shear force created by the upward flow of the refrigerant vapor. Velocities are converted to refrigeration capacities by considering a saturated cycle between specified condenser and evaporator pressures. General relationships thus developed are enumerated for R134a by preparing minimum capacity tables for copper suction and discharge risers.     

Potential Anomaly Separation and Archeological Site Localization Using Genetically Trained Multi‐level Cellular Neural Networks

In this paper, a supervised algorithm for the evaluation of geophysical sites using a multi‐level cellular neural network (ML‐CNN) is introduced, developed, and applied to real data. ML‐CNN is a stochastic image processing technique based on template optimization using neighborhood relationships of the pixels. The separation/enhancement and border detection performance of the proposed method is evaluated by various interesting real applications. A genetic algorithm is used in the optimization of CNN templates. The first application is concerned with the separation of potential field data of the Dumluca chromite region, which is one of the rich reserves of Turkey; in this context, the classical approach to the gravity anomaly separation method is one of the main problems in geophysics. The other application is the border detection of archeological ruins of the Hittite Empire in Turkey. The Hittite civilization sites located at the Sivas‐Altinyayla region of Turkey are among the most important archeological sites in history, one reason among others being that written documentation was first produced by this civilization.     

Carbon nanotube/boehmite-derived alumina ceramics obtained by hydrothermal synthesis and spark plasma sintering (SPS)

Preparation, structure and properties of hydrothermally treated carbon nanotube/boehmite (CNT/γ-AlOOH) and densification with spark plasma sintering of Al₂O₃ and CNT/Al₂O₃ nanocomposites were investigated. Hydrothermal synthesis was employed to produce CNT/boehmite from an aluminum acetate (Al(OH)(C₂H₃O₂)₂) and multiwall-CNTs mixture (200 °C/2 h.). TEM observations revealed that the size of the cubic shape boehmite particles lies around 40 nm and the presence of the interaction between surface functionalized CNTs and boehmite particles acts to form ‘nanocomposite particles’. Al₂O₃ and CNT/Al₂O₃ compact bodies were formed by means of spark plasma sintering (SPS) at 1600 °C for 5 min using an applied pressure of 50MPa resulting in the formation of stable α-Al₂O₃ phase and CNT–alumina compacts with nearly full density. It was also found that CNTs tend to locate along the alumina grain boundaries and therefore inhibit the grain coarsening and cause inter-granular fracture mode. The DC conductivity measurements reveal that the DC conductivity of CNT/Al₂O₃ is 10^?4 S/m which indicate that there is a 4 orders of magnitude increase in conductivity compared to monolithic Al₂O₃. The results of the microhardness tests indicate a slight increase in hardness for CNT/Al₂O₃ (28.35 GPa for Al₂O₃ and 28.57 GPa for CNT/Al₂O₃).     

The impact of a realistic packet traffic model on the performance of surveillance wireless sensor networks

It is quite common to see that classical periodic or Poisson packet traffic models are used for evaluating the performance of wireless sensor networks (WSNs). However, these models may not be appropriate for modeling the data traffic resulting from a particular application. Furthermore, they may be overestimating the performance of a WSN. In this paper, we show the significance of using a realistic and application-specific packet traffic model by comparing the performance of a well-known WSN protocol under the Surveillance WSN packet traffic model (SPTM), as well as under periodic and binomial traffic models. A packet traffic framework specific to surveillance applications is proposed which is then used for deriving SPTM analytically. In order to be adaptable and flexible, SPTM incorporates a probabilistic and parametric sensor detection model. Simulation results show that to employ an application-specific packet traffic model has significant impact on the performance evaluation of the WSN and ordinary traffic models may overestimate the capacity of the WSN.     

Fundamental periods of steel eccentrically braced frames

This paper describes formulation of a hand method that can be used to estimate the computed fundamental periods of vibration of building structures in general and steel eccentrically braced frames (EBFs) in particular. The developed method uses the Rayleigh's method as a basis and utilizes the roof drift ratio (RD_R) under seismic forces as a parameter. To obtain RD_R, more than 4000 EBFs were designed by considering the seismic hazard, number of stories, braced bay width and link length to bay width ratio as prime variables. A model was developed to estimate RD_R, which depends on the rigid plastic deformation mechanism for a typical EBF. The method was verified using design data produced as a part of this work as well as data published in literature. The verifications indicate that the proposed formulation is capable of providing acceptable estimates of the computed period. When compared with existing empirical period–height relationships, the proposed formulation offers closer estimates with reduced scatter. The method was further refined to derive new period–height relationships for two different seismicity regions. The accuracy of the relationship for high seismic regions was verified using measured periods of EBF buildings. Copyright © 2014 John Wiley & Sons, Ltd.     

3-D micro-ceramic components from hydrothermally processed carbon nanotube–boehmite powders by electrophoretic deposition

Boehmite/multi-wall carbon nanotube (MWCNT) composite powders were prepared by hydrothermal processing. Starting chemical of aluminum acetate powders (2Al(OH)(C₂H₃O₂)₂) and MWCNTs were mixed for the formation of stoichiometric boehmite powders in an attempt to synthesize MWCNT-reinforced boehmite nano-powders via hydrothermal synthesis at 200 °C for 2 h. Kinetically stable suspensions of MWCNT–boehmite composite powders were prepared and subsequently electrophoretic deposition (EPD) was applied to obtain complex shape products in the form of micro-gears. It is shown that the EPD technique is a powerful tool to manufacture small components in a short time. Detail TEM observations also indicated that hydrothermal processing provides an ideal environment to obtain homogeneous mixtures of MWCNT–boehmite powders due to effective surface functionalization of MWCNTs under hydrothermal conditions.     

Flow-Boundary Effects on Critical Submergence of Intake Pipe

In this study, the effects of intake-pipe blockage and location of impervious boundaries on critical submergence of an intake pipe are presented. Experiments were conducted on a horizontal intake pipe sited in a dead-end canal flow. Theoretical results and available experimental data are compared. It is shown that, as the distance between the intake-pipe entrance and the dead end gets smaller than the critical submergence depth, the deviation between theoretical and experimental results increases. A potential flow solution still gives acceptable results when this distance is smaller than the critical submergence, but it overpredicts by about 80% when the distance between the intake-pipe entrance becomes much smaller than the critical submergence depth.     

Thermal modelling of the multi-stage heating system with variable boundary conditions in the wafer based precision glass moulding process

In the precision glass moulding process, the heat transfer and the resulting transient temperature distributions of the molten glass are of great importance because they significantly affect the productivity as well as the thermally induced residual stresses in the final product. Thermal modelling of the heating system in the glass moulding process considering detailed heating mechanisms therefore plays an important part in optimizing the heating system and the subsequent pressing stage in the lens manufacturing process.The current paper deals with three-dimensional transient thermal modelling of the multi-stage heating system in a wafer based glass moulding process. In order to investigate the importance of the radiation from the interior and surface of the glass, a simple finite volume code is developed to model one dimensional radiation–conduction heat transfer in the glass wafer for an extreme case with very high temperature difference considering temperature dependant thermal conductivity and heat capacity. Afterwards, by using three-dimensional FEM modelling along with a predefined experimental test, the equivalent glass–mould interface contact resistance is determined for two different pressures. Finally, the three-dimensional modelling of the multi-stage heating system in the wafer based glass moulding process is simulated with the FEM software ABAQUS for a particular industrial application for mobile phone camera lenses to obtain the temperature distribution in the glass wafer. In the numerical modelling, the interface boundary conditions for each heating stage are changed according to the determining heat transfer mechanism(s). Numerical results are compared with experimental data to show the validity of the numerical modelling. The obtained results show that the right thermal modelling is highly dependent on the proper choice of thermal boundary conditions in different stages according to the real physical phenomena behind the process.     

A novel acoustic indoor localization system employing CDMA

Nowadays outdoor location systems have been used extensively in all fields of human life from military applications to daily life. However, these systems cannot operate in indoor applications. Hence, this paper considers a novel indoor location system that aims to locate an object within an accuracy of about 2 cm using ordinary and inexpensive off-the-shelf devices and that was designed and tested in an office room to evaluate its performance.In order to compute the distance between the transducers (speakers) and object to be localized (microphone), time-of-arrival measurements of acoustic signals consisting of Binary Phase Shift Keying modulated Gold sequences are performed. This DS-CDMA scheme assures accurate distance measurements and provides immunity to noise and interference.Two methods have been proposed for location estimation. The first method takes the average of four location estimates obtained by trilateration technique. In the second method, only a single robust position estimate is obtained using three distances while the least reliable fourth distance measurement is not taken into account.The system?s performance is evaluated at positions from two height levels using system parameters determined by preliminary experiments. The precision distributions in the work area and the precision versus accuracy plots depict the system performance. The proposed system provides location estimates of better than 2 cm accuracy with 99% precision.     

Free convection to power‐law fluids from a vertical cone of variable surface temperature

Steady free convection laminar boundary‐layer flow about a heated vertical cone immersed in a quiescent power‐law fluid is investigated. Surface temperature is assumed to have a power‐law variation with the distance. Similarity solutions are obtained numerically for the boundary‐layer velocity and temperature profiles. Magnitudes of the velocity and temperature profiles are found to decrease with increasing values of the flow behaviour index and the surface temperature exponent. The effects of flow behaviour index and the generalized Prandtl number on the surface shear stress and heat flux are determined. Copyright © 2001 John Wiley & Sons, Ltd.