A novel acoustic indoor localization system employing CDMA

Nowadays outdoor location systems have been used extensively in all fields of human life from military applications to daily life. However, these systems cannot operate in indoor applications. Hence, this paper considers a novel indoor location system that aims to locate an object within an accuracy of about 2 cm using ordinary and inexpensive off-the-shelf devices and that was designed and tested in an office room to evaluate its performance.In order to compute the distance between the transducers (speakers) and object to be localized (microphone), time-of-arrival measurements of acoustic signals consisting of Binary Phase Shift Keying modulated Gold sequences are performed. This DS-CDMA scheme assures accurate distance measurements and provides immunity to noise and interference.Two methods have been proposed for location estimation. The first method takes the average of four location estimates obtained by trilateration technique. In the second method, only a single robust position estimate is obtained using three distances while the least reliable fourth distance measurement is not taken into account.The system?s performance is evaluated at positions from two height levels using system parameters determined by preliminary experiments. The precision distributions in the work area and the precision versus accuracy plots depict the system performance. The proposed system provides location estimates of better than 2 cm accuracy with 99% precision.     

Free convection to power‐law fluids from a vertical cone of variable surface temperature

Steady free convection laminar boundary‐layer flow about a heated vertical cone immersed in a quiescent power‐law fluid is investigated. Surface temperature is assumed to have a power‐law variation with the distance. Similarity solutions are obtained numerically for the boundary‐layer velocity and temperature profiles. Magnitudes of the velocity and temperature profiles are found to decrease with increasing values of the flow behaviour index and the surface temperature exponent. The effects of flow behaviour index and the generalized Prandtl number on the surface shear stress and heat flux are determined. Copyright © 2001 John Wiley & Sons, Ltd.     

Realizations of mutative 4-ports and their applications to memstor simulations

In this paper, in addition to the universal 4-port mutator circuit introduced earlier with an adder and a subtractor block, two more 4-port mutator circuits, one with plus type (CCII+) and minus type current conveyors (CCII?), the other with a plus type current conveyor (CCII+) and one minus type current follower (CF?) are presented, their port relation matrix and their realization of different memstors are tabulated. How the transfer characteristics of the ideal mutative 4-ports with respect to frequency hold is verified using their transistor level simulations. By terminating properly two ports of the mutative 4-port simulations of a memristor with three different mutators, of a meminductor and of a memcapacitor are presented and compared also with some mutators existing in the literature.     

Material response characterization of a low-density carbon composite ablator in high-enthalpy plasma flows

Future space exploration missions beyond Earth’s orbit, such as sample returns from Mars, will use ablative materials for the thermal protection system in order to shield the spacecraft from the severe heating during reentry. In this paper, we present the results of an elaborate test campaign on a lightweight carbon composite ablator with the aim of defining a procedure for material response characterization in a 1.2-MW inductively heated Plasmatron facility, suitable to reproduce the hypersonic flight boundary layer environment. Three different test gases were used, air, nitrogen, and argon, at surface temperatures exceeding 3300 K. A comprehensive experimental setup was developed including a nonintrusive technique to measure surface recession by means of a high-speed camera. Surface degradation was strongly test gas dependent, while mass loss was mainly driven by in-depth decomposition of phenolic resin. Emission spectroscopy helped us identify C₂ as a product of dissociating hydrocarbons, as well as cyanogen, suggesting surface nitridation. Melt flow at the surface and silicon emission indicated degradation of the glass microspheres used as additional filler. In air plasma, oxidation was inferred to be the main mechanism for ablation.     

Constrained Efficient Global Optimization for Pultrusion Process

Composite materials, as the name indicates, are composed of different materials that yield superior performance as compared to individual components. Pultrusion is one of the most cost-effective manufacturing techniques for producing fiber-reinforced composites with constant cross-sectional profiles. This obviously makes it more attractive for both researchers and practitioners to investigate the optimum process parameters. Validated computer simulations cost less as compared to physical experiments, therefore this makes them an efficient tool for numerical optimization. However, the complexity of the numerical models can still be “expensive” and forces us to use them sparingly. These relatively more complex models can be replaced with “surrogates,” which are less complex and are therefore faster to evaluate representative models. In this article, a previously validated thermochemical simulation of the pultrusion process has shortly been presented. Following this, a new constrained optimization methodology based on a well-known surrogate method, i.e., Kriging, is introduced. Next, a validation case is presented to clarify the working principles of the implementation, which also supports the upcoming main optimization test cases. This design problem involves the design of the heating die with one, two, and three heaters together with the pulling speed. The results show that the proposed methodology is very efficient in finding the optimal process and design parameters.     

Oxidative stability of extra virgin olive oil blended with sesame seed oil during storage: an optimization study based on combined design methodology

In this study, extra virgin olive oil (EVOO) was mixed with sesame seed oil (SSO) at different concentrations (100:0, 90:10, 80:20, 70:30 and 60:40 w/w) and stored for 90 days at room conditions. To see the effect of mixing level and storage period, a combined design having two mixtures (EVOO and SSO) and one process factor (storage period) was used. Main oxidation parameters (free fatty acid content, refractive index, peroxide value and p-anisidine value) and major fatty acid composition of the samples were characterized. It was observed that EVOO is quite sensitive to oxidation compared to SSO and increase of SSO in the blended oil samples decreased the oxidation of the product during storage. Major fatty acids were palmitic, oleic and linoleic acids. Addition of SSO caused a significantly change in the fatty acid composition. The results showed that EVOO could be stored for longer time by mixing of SSO having strong antioxidant activity.     

Development of computational software for analysis of curved girders under construction loads

The analysis of horizontally curved, trapezoidal steel girders presents a variety of computational challenges. During the erection and construction stages before a concrete deck is available to form a closed section, these girders are weak in torsion and susceptible to warping. Considering the design of an entire bridge system, current design approaches favor the use of a grid analysis methodology. While the use of a grid analysis procedure offers the advantage of computational efficiency, it is unable to capture girder stresses and brace member forces with sufficient accuracy, particularly during the critical erection and construction stages. In this paper, we present an alternative analysis approach based on the finite element method. The developed software has been designed to be computationally efficient and easy to use for bridge designers.     

A novel microstream injection molding method for thermotropic liquid crystalline polymers to promote mechanical isotropy: A matrixing microbeam X-ray study

The effects of flow-altering inserts and mold cavity geometry on the mechanical properties of an injection molded liquid crystalline polymer were studied to produce parts with properties approaching macroscopically isotropic state. By inserting fine metal mesh barriers to the gates of the mold cavities, a large number of highly oriented microstreams are produced. After their creation these highly oriented streams of differing flow vectors intertwine and this texture remains reasonably intact even after substantial shearing and extension history imparted on them during ensuing flow into the cavity. This method is effective in the interior away from the skin regions formed under the shearing flow during injection. The local molecular orientation was determined using a matrixing microbeam WAXS technique that allows precision movement of the sample in the microbeam X-ray. Samples produced with the 1.0 mm² mesh showed large variations in the local symmetry axis with respect to the machine as measured by microbeam X-ray diffraction incrementally from the edge to the core of the parts. In comparison, samples with no mesh insert showed only gradual changes in the tilt angle (angle between local symmetry axis and flow direction). The modulus and tensile strengths of all samples with the 1.0 mm² mesh inserts were found to approach virtual global mechanical isotropy.     

Appraisal of self, social environment, and state authority as a possible mediator of posttraumatic stress disorder in tortured political activists.

This study examined appraisal of self and others, as measured by semantic differential ratings of Police, State, Society, Family, Friend, Myself as a Man/Woman, and Myself as a Political Person, in 55 tortured political activists in Turkey, 55 nontortured political activists, and 55 nontortured, politically noninvolved controls. There were no remarkable differences between tortured and nontortured political activists; both groups differed from controls in having a more negative appraisal of the police and the state and stronger perceptions of danger, mistrust, and injustice in relation to state authority. Lack of beliefs concerning a "benevolent state" may have protected the survivors from the traumatic effects of state-perpetrated torture. Further research into the possible protective role of belief systems in posttraumatic stress disorder is needed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)