Parallel machine scheduling with flexible resources

Parallel machine flexible resource scheduling (PMFRS) problems consider an additional flexible resource (e.g. operators), which can be freely allocated to any jobs and/or any machines and may speed-up the process in proportion to its amount. If job–machine assignment is unspecified, the problem is referred to as unspecified PMFRS (UPMFRS). This paper reviews the mathematical models of both PMFRS and UPMFRS problems in the literature and not only gives some extensions to the model of dynamic PMFRS problem but also presents integer programming (IP) models for static and dynamic UPMFRS problems with the objective of minimizing makespan. To solve large-sized dynamic PMFRS and UPMFRS problems, a relaxed IP based constraint programming (CP) approach is also proposed. All IP models and the proposed IP/CP approach are tested with an extensive computational study. The results of the computational experiments are discussed with respect to the major parameters of the problem and conclusions are drawn.     

Analysis and evaluation of distributed photovoltaic generation in electrical energy production and related regulations of Turkey

Clean Technologies and Environmental Policy - Turkey is a developing country with rising energy demands. Energy access is one of the key parameters to sustain the development, since the country...     

Optimization of primary freeze drying conditions for powdered chicken meat hydrolysate from mechanically deboned chicken residues

Abstract

In this study, mechanically deboned chicken meat residues were hydrolyzed by protease enzyme and chicken meat hydrolyzate was freeze-dried in order to produce high-quality meat powder. Due to its high cost, energy and time consumption, freeze-drying conditions needed to be optimized. Response surface methodology was used for optimization with the independent variables shelf temperature, lyophilization temperature and freezing rate. The responses were sublimation time, solubility and in vitro protein digestibility. The optimum conditions were shelf temperature, 15?°C; lyophilization temperature, –10?°C; and freezing rate, 2.0?°C/min. Sublimation time, solubility and in vitro protein digestibility for this optimum conditions were found to be 590.344?min, 25.626% and 23.808%, respectively.     

Low Temperature Initiation by 3-Mercaptopropionic Acid-Ce(IV) or -KMnO4 Redox System for Polymerization of Acrylamide Monomer

Polymerization of acrylamide monomer was performed at low temperatures using 3-mercaptopropionic acid-cerium(IV) sulfate and 3-mercaptopropionic acid-KMnO₄ redox systems in acid aqueous medium. Water soluble polyacrylamides containing 3-mercaptopropionic acid end groups were synthesized. The effects of mole ratio of acrylamide to initiator(n_MSA= n_Ce(IV)), polymerization time, temperature, and concentration of sulfuric acid on the yield and molecular weight of polymer were investigated. The decrease in the mole ratio of acrylamide/Ce(IV) at constant monomer concentration resulted in an increase in the yield but a decrease in molecular weight of polymer. The increase of reaction temperature from 20° to 70°C resulted in a decrease in the yield but indicated generally a constant value for the molecular weight of polymer. With increasing of polymerization time, the yield and molecular weight of polymer did not change mainly. Ce(IV) and Mn(VII) ions are reduced to Ce(III) and Mn(II) ions, respectively in the polymerization reaction. The existence of Ce(III) ion bonded to polymer was investigated by UV-visible spectrometry and fluorescence measurements. The amount of Mn(II) that is incorporated to the polymer was determined using graphite furnace atomic absorption spectrometry. The mechanism of this phenomenon is discussed.     

Effect of nonthermal plasma treatment on surface roughness and bond strength between veneer ceramic and zirconia core

This in vitro study evaluated the effect of nonthermal plasma (NTP) treatment on the surface roughness (Ra) of the zirconia and the shear bond strength (SBS) between the veneer ceramic and the zirconia. Ninety zirconia specimens were divided into six groups according to the surface treatments applied: control with no treatment; sandblasting with 50-μm Al₂O₃ particles; oxygen plasma treated for 5 min; oxygen plasma treated for 10 min; argon plasma treated for 5 min; and argon plasma treated for 10 min. Ra values were measured using a profilometer. Specimens (n = 12) were then veneered with a nano-fluorapatite ceramic, and the SBS test was performed. Scanning electron microscopy, atomic force microscopy, and X-ray diffraction analyses were performed. The sandblasting procedure significantly increased the surface roughness; however, the plasma groups showed similar Ra values compared to the control group. NTP and sandblasting treatment significantly increased the bond strength and led to higher SBS values than the control. Plasma application did not induce phase transformation; however, sandblasting caused monoclinic phase transformation of the zirconia. NTP application (either oxygen or argon) can enhance the bond strength between the veneer ceramic and the zirconia core without altering the surface morphology or causing zirconia phase transformation.     

Evaluation of various denture cleansers on color stability and surface topography of polyetherketoneketone,polyamide, and polymethylmethacrylate

The aim of this study was to evaluate the effect of sodium perborate effervescent tablets and citric acid solution on the color stability and surface topography of a new generation of high‐performance polymer polyetherketoneketone (PEKK), thermoinjection‐molded polyamide, and polymethylmethacrylate (PMMA). Fifty disc‐shaped specimens were fabricated (10 mm × 2 mm) from PEKK (P group), polyamide (D group), and PMMA (M group). These groups were divided into five subgroups (n = 10) according to the storage media. The test groups were immersed in the following solutions: distilled water (Control), Corega, Protefix, Perlodent, and Curaprox. The color stability values (ΔE) were measured using a spectrophotometer before and after immersion in distilled water and four different denture cleansers for 8 hr/day for 140 days. Topography alterations after treatments were assessed with scanning electron microscopy (SEM). Data were analyzed by one‐way analysis of variance (ANOVA) followed by Tukey's Honest Significant Difference test. The p < .05 was considered significant. All denture cleansers increased the ΔE values relative to the baseline values in the M, D, and P groups (p < .05). The Perlodent denture cleanser demonstrated the highest ΔE value in all groups, which was unacceptable. Curaprox denture cleanser showed the lowest ΔE value in the M and D groups (p < .05). Curaprox in all groups showed a ?E value less than 3.7. For patients who have PEKK‐ and polyamide‐based prosthesis, the use of citric acid‐based cleansers may be more recommended than sodium perborate‐containing cleansers because of its clinically acceptable color changes on polymers in terms of color stability.     

Evaluation of adsorption and coagulation characteristics of humic acids preceded by alternative advanced oxidation techniques

Humic substances mainly humic acids constitute the major fraction of natural organic matter in water supplies. Humics express diverse actions primarily related to the formation of potentially harmful disinfection by products (DBPs). Therefore, the removal of DBP precursors through numerous treatment techniques gains high importance. Besides the conventional treatment processes, the applications of advanced oxidation techniques are considered as effective tools for the elimination of humic acids (HAs) from natural waters. In the present study, both the adsorption and coagulation characteristics of humic acid samples are evaluated subsequent to pretreatment by photocatalytic oxidation and ozonation. The changes in preoxidized humic acid solutions are assessed in relation to the alterations induced in the UV-vis and fluorescence spectroscopic properties. The removal efficiency of color in terms of Color₄₃₆ and aromaticity with respect to UV₂₅₄ are presented relevant to each treatment step. Major key parameters such as the selection of coagulant types (alum and ferric chloride), coagulant aids (ionic and non-ionic polyelectrolyte) and optimum coagulant dose were comparatively discussed. The adsorption characteristics of powdered activated carbon (PAC) and granular activated carbon (GAC) were investigated.     

Disruptions to women's social identity: A comparative study of workplace stress experienced by women in three geographic regions.

Drawing on social identity theory (P. J. Burke, 1991) and the current status of women and equal opportunity legislation, the authors tested several factors associated with distress in working women in the People's Republic of China (PRC), Hong Kong, and the United States. Women in Hong Kong experienced significantly greater levels of life stress than PRC and U.S. women. Reports of negative attitudes toward women, gender evaluation, and avoidance coping were greater for Hong Kong and PRC women than for U.S. women. Hong Kong women reported more use of positive/confrontational coping mechanisms. Negative attitudes toward women had an important influence on life stress across regions. Moderator tests resulted in 2 significant findings: The effect of negative attitudes toward women on life stress was stronger for PRC and Hong Kong women, and the relationship between nervous/self-destructive coping and life stress was stronger for U.S. women. (PsycINFO Database Record (c) 2011 APA, all rights reserved)