Effects of free convection and mass transfer on the flow past an impulsively moving infinite vertical circular cylinder

The effects of free convection and mass transfer are taken into account for the Stokes' problem of the flow near an impulsively moving infinite vertical circular cylinder. Expressions of the velocity, temperature, concentration and skin friction of the fluid in closed form are obtained by the Laplace transform technique. The results based on various values of the parameters Gr (Grashof number), Gm (modified Grashof number), Sc (Schmidt number) and Pr (Prandtl number) are given in graphical form. It will be seen that there is a rise in the velocity due to the presence of a foreign mass. But higher Sc yields the lower velocity and skin friction. As the radius of the circular cylinder approaches to infinite, the results presented in this paper agree with those of V.M. Soundalgekar's and C.K. Chen's etc. for the flow past an impulsively moving infinite vertical plate.     

An experimental investigation of electrically thick rectangular microstrip antennas

The electromagnetic properties of electrically thick rectangular microstrip antennas were investigated experimentally. Antennas were fabricated with different patch sizes and with electrical thicknesses ranging from 0.03 to 0.23 wavelengths in the dielectric substrate. The resonant frequencies were measured and compared to existing formulas. The bandwidth was calculated as a function of electrical thickness and the antenna radiation patterns were measured.     

Numerical modeling of near corona wire electrohydrodynamic flow in a wire-plate electrostatic precipitator

Numerical modelling of the flow velocity fields for the near corona wire electrohydrodynamic (EHD) flow was conducted. Solutions of the steady, two-dimensional momentum equations have been computed for a wire-plate type electrostatic precipitator (ESP). The equations were solved in the conservative finite-difference form on a fine uniform rectilinear grid of sufficient resolution to accurately capture the momentum boundary layers. The numerical procedure for the differential equations was used by SIMPLEST algorithm. The CFD code coupled with Poisson's electric field, ion transport equations and the momentum equation with electric body force, was used for the numerical simulation with the Chen-Kim k-epsiv turbulent model. The numerical results show that EHD secondary flow was clearly visible in the downstream regions of the corona wire despite the low Reynolds number for the electrode (Re _cw=12.4). Secondary flow vortices caused by the EHD increases with increasing discharge current or EHD number, hence pressure drop of ESP increases     

优化改造油田生产工艺 增产增效提高环保水平——涠洲11-4油田生产工艺优化改造实践

油田生产水处理和海管输油能力不足是制约涠洲11-4油田生产和影响生产安全的瓶颈问题。合理利用油田原有设施和条件,对生产水处理系统和输油管道系统进行工艺优化改造,使该油田B平台海管运行的安全可靠性得以明显提高,并使油田生产水处理能力和处理质量得到有效改善,同时大幅度降低了油田生产成本,拓宽了油田增产挖潜的空间。涠洲11-4油田优化改造生产工艺实践经验,可为进一步拓宽海上老油气田的生产管理思路提供参考。     

Noninterfering optical method of HBT circuit evaluation

The authors report a novel noninterfering and simple approach for evaluation of circuits implemented with AlGaAs/GaAs heterojunction bipolar transistors (HBTs). This method makes use of radiative recombination in the base region of current-carrying HBTs. The infrared radiation emitted is 'visible' to the closed-circuit TV (CCTV) cameras. Therefore, one can view the operation of the HBT circuit under test at normal biases with a TV monitor. This method can be used to determine logic states of gates, as well as collector current of individual HBTs within integrated circuits.<>     

A damage model for creep crack growth

A model is developed for damage produced by the growth of isolated grain boundary cavities under power law creep. This damage model is combined with the small scale yielding stress and strain fields to predict the damage ahead of a stationary and a steadily propagating crack tip in an elastic-power law creeping material. A failure criterion, based upon the damage ahead of the crack tip attaining a critical value, is invoked. This criterion leads to predictions for the incubation time prior to initiation of crack growth and for the relationship between the remote stress intensity factor and the steady state crack speed. Results are presented for both elastic-primary and -secondary creep crack growth. In either case, there exists a minimum stress intensity factor below which steady state crack growth is not possible. Comparisons of the predictions of this model with others for steady state crack propagation in elastic-secondary creeping materials are also made.

---

Résumé On développe un modèle décrivant le dommage produit par la croissance de cavités isolées aux frontières des grains sous l'effet d'un fluage selon une loi parabolique. Ce modèle d'endommagement est combiné aux champs de contrainte et de déformation conduisant à une plastification à petite échelle, en vue de prédire le dommage qui se produit en avant de l'extrémité d'une fissure stationaire et en propagation lente, dans un matériau soumis à fluage selon une loi élastique. On invoque un critère de rupture basé sur la valeur critique atteinte par le dommage en avant de l'extrémité de la fisure. Ce critère conduit à prédire le temps d'incubation avant amorçage de la croissance d'une fissure, ainsi que la relation entre le facteur d'intensité des contraintes appliquées à une certaine distance et la vitesse de croissance stable de la fissure.On présente les résultats dans les cas de croissance d'une fissure de fluage au stade secondaire. Dans les deux cas, il existe un facteur d'intensité de contrainte minimum en dessous duquel une croissance stable de la fissure n'est pas possible. On procède également à des comparaisons des prédictions données par ce modèle avec d'autres, pour la propagation en état stable d'une fissure dans des matériaux soumis à fluage secondaire élastique.

     

Eigen filter to detect volitional EMG signals in autogenic EMG-controlled FES

Presented is an eigen filter to remove autogenic electrical stimulation artefacts and M-waves while preserving the volitional electromyographic signal. The optimality of the eigen filter is shown, along with simulated and measured data to indicate its superior performance over conventional prediction error filters.     

Coplanar stripline resonators modeling and applications to filters

This paper presents coplanar stripline (CPS) resonators and their practical implementations to filters. Five types of CPS resonator are built using open and short-ended strips. Lumped-element equivalent circuits are presented for each resonator. Their performances are investigated and compared in terms of Q factor or bandwidth. Two types of bandpass filter are developed with the resonators. The bandpass filters have low-passband insertion losses and wide-stopband suppression bandwidths. Lumped-element equivalent circuits are presented for the bandpass filters. A wide-band CPS-to-microstrip transition is developed for the measurements. The back-to-back transition has an insertion loss of less than 3 dB and a return loss of better than 10 dB for the frequency range from 1.3 to 13.3 GHz (1:10.2)     

Ni|MH二次电池负极用贮氢合金的研究发展

本文详细综述了近年Ni MH二次电池负极用贮氢合金的研究发展概况。依次阐述了AB5、AB2与Ni Ni基、V Ti基固溶体合金以及Mg Ni合金的电化学性能。讨论了改善电化学性能的一些方法 ,同时给出目前一些研究成果     

Polarization independent isolator using spatial walkoff polarizers

A novel type of polarization-independent optical isolator is described which utilizes the polarization walkoff provided by birefringent crystals. Isolation of 44 dB is measured at a wavelength of 1.3 mu m with single-mode fiber insertion loss of 1.5 dB. A temperature-independent scheme is also described that provides at least 39 dB of isolation over the temperature range of 25-75 degrees C.<>