A multi-objective adaptive immune algorithm for multi-application NoC mapping

Current SoC design trends are characterized by the integration of larger amount of IPs targeting a wide range of application fields. Such multi-application systems are constrained by a set of requirements. In such scenario network-on-chips (NoC) are becoming more important as the on-chip communication structure. Designing an optimal NoC for satisfying the requirements of each individual application requires the specification of a large set of configuration parameters leading to a wide solution space. It has been shown that IP mapping is one of the most critical parameters in NoC design, strongly influencing the SoC performance. IP mapping has been solved for single application systems using single and multi-objective optimization algorithms. In this paper we propose the use of a multi-objective adaptive immune algorithm (M²AIA), an evolutionary approach to solve the multi-application NoC mapping problem. Latency and power consumption were adopted as the target multi-objective functions. To compare the efficiency of our approach, our results are compared with those of the genetic and branch and bound multi-objective mapping algorithms. We tested 11 well-known benchmarks, including random and real applications, and combines up to 8 applications at the same SoC. The experimental results showed that the M²AIA decreases in average the power consumption and the latency 27.3 and 42.1 % compared to the branch and bound approach and 29.3 and 36.1 % over the genetic approach.     

Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles

With ever-increasing concerns on our environment, there is a fast growing interest in electric vehicles (EVs) and hybrid EVs (HEVs) from automakers, governments, and customers. As electric drives are the core of both EVs and HEVs, it is a pressing need for researchers to develop advanced electric-drive systems. In this paper, an overview of permanent-magnet (PM) brushless (BL) drives for EVs and HEVs is presented, with emphasis on machine topologies, drive operations, and control strategies. Then, three major research directions of the PM BL drive systems are elaborated, namely, the magnetic-geared outer-rotor PM BL drive system, the PM BL integrated starter-generator system, and the PM BL electric variable-transmission system.     

A novel sliding-mode observer for indirect position sensing ofswitched reluctance motor drives

A switched reluctance motor (SRM) drive generally requires a rotor position sensor for commutation and current control. However, the use of this position sensor increases both cost and size of the motor drive and causes limitations for industrial applications. In this paper, a novel indirect position sensing technique, namely, the sliding-mode observer, is proposed for SRM drives. The corresponding design approach and operating performance are provided to illustrate the fast convergence and high robustness of the observer against disturbances and variations     

Implementation of a third-generation 1.1-GHz 64-bit microprocessor

This third-generation 1.1-GHz 64-bit UltraSPARC microprocessor provides 1-MB on-chip level-2 cache, 4-Gb/s off chip memory bandwidth, and a new 200 MHz JBus interface that supports one to four processors. The 87.5-million transistor chip is implemented in a seven-layer-metal copper 0.13-/spl mu/m CMOS process and dissipates 53 W at 1.3 V and 1.1 GHz.     

Efficient fine granularity scalability using adaptive leaky factor

Fine Granularity Scalability (FGS) video coding has been adopted by the MPEG-4 standard for video streaming applications. In this paper, we propose a novel FGS coding scheme, which applied adaptive leaky factors for the enhancement layer prediction to further improve the coding efficiency of FGS. A flexible method that can dynamically determine the leaky factors according to the network conditions is also presented. With the proposed method, a better trade-off between the coding efficiency and drifting reduction can be achieved, and the coding performance is further improved compared with using a fixed leaky factor. Experimental results show that the proposed method can further improve the coding efficiency over a wide range of bitrate and packet loss ratio, and still keep the original characteristics, such as fine granularity, and bandwidth adaptation.     

Performance evaluation of random power capture on mobile communications

Power assignment schemes are man‐made methods to enhance the capture effect of radio communications. In a previous study, Wen and Yang investigated the combined capture effect of the fixed power assignment scheme, Rayleigh fading, and near–far effect on the performance of packet radios. The performance analysis was limited to an infinite population environment. This assumption is reasonable for a conventional packet radio system with a vast service area. However, for a cellular mobile system, a finite population model should be used. In this paper, we analyse the combined natural and man‐made capture effect on the performance of a cellular system with finite population in each cell. A random power assignment scheme is adopted to produce the man‐made capture. The system throughput and delay are carried out by a Markov model. Some numerical calculations are used to demonstrate the degree of performance improvement. Copyright © 2001 John Wiley & Sons, Ltd.     

A 90-nm logic technology featuring strained-silicon

A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.     

Switch‐and‐examine combining with different new switch statistics for diversity over Rayleigh fading channels

Three schemes of multibranch switch‐and‐examine combining (MSEC) with switch statistics different from the signal‐to‐noise ratio used in the traditional MSEC are analyzed. For each diversity branch, with its fading factor a and low‐passed received signal r, the switch statistics for the three MSEC schemes considered in the paper are | r | , | ar | , and a linear combination of a and | r | , respectively. To illustrate the performances of the MSEC schemes, the average BER of each MSEC scheme with BPSK signaling is evaluated for independent and identically distributed Rayleigh fading channels. For performance optimization, the optimal switch thresholds of the MSEC schemes are obtained. Numerical results based on the analysis and simulations are presented for performance illustrations. Copyright © 2012 John Wiley & Sons, Ltd.     

A New Class of Renewable Thermoplastics with Extraordinary Performance from Nanostructured Lignin‐Elastomers

A new class of thermoplastic elastomers has been created by introducing nanoscale‐dispersed lignin (a biomass‐derived phenolic oligomer) into nitrile rubber. Temperature‐induced controlled miscibility between the lignin and the rubber during high shear melt‐phase synthesis allows tuning the material's morphology and performance. The sustainable product has unprecedented yield stress (15–45 MPa), strain hardens at large deformation, and has outstanding recyclability. The multiphase polymers developed from an equal‐mass mixture of a melt‐stable lignin fraction and nitrile rubber with optimal acrylonitrile content, using the method described here, show 5–100 nm lignin lamellae with a high‐modulus rubbery interphase. Molded or printed elastomeric products prepared from the lignin‐nitrile material offer an additional revenue stream to pulping mills and biorefineries.