Utilization of self-injection Fabry–Perot laser diode for long-reach WDM-PON

In this investigation we propose and demonstrate a wavelength widely tunable laser source employing a self-injected Fabry–Perot laser diode (FP-LD) for long-reach wavelength-division-multiplexed passive optical network (WDM-PON). By using a tunable bandpass filter and an optical circulator inside the gain cavity, a stable and single-longitudinal-mode (SLM) laser output is achieved. Besides, the proposed laser sources are directly modulated at 2.5 Gb/s for both downlink and uplink transmissions of 85 km single mode fiber (SMF) in PON without dispersion compensation.     

Electrical characteristics of nMOSFETs fabricated on hybrid orientation substrate with amorphization/templated recrystallization method

The use of hybrid orientation technology (HOT) with direct silicon bond (DSB) wafers consisting of a (1 1 0) crystal orientation layer bonded to a bulk (1 0 0) handle wafer provides promising opportunities for easier migration of bulk CMOS designs to higher performance materials. However, the material quality of nMOSFETs regions, which has been undergone amorphization/templated recrystallization (ATR) process for transforming the Si surface into (1 0 0) orientation, is still a concern because the ATR-induced defects (i.e., dislocation loops or threads) at the recrystallization layer, could degrade gate oxide integrity. In this paper, we report an investigation of charge pumping and low-frequency (1/f) noise in HOT nMOSFETs. Devices with the increased anneal time brought out a significant reduction in the charge pumping current and 1/f noise, which indicates ATR-induced defects were suppressed and consequently the “low-trap-density” of the Si/SiO₂ interface. Finally, for the first time, the behavior of 1/f noise for HOT nMOSFETs was investigated, and could be described by a unified model, i.e. a combination of carrier-number fluctuations and mobility fluctuations.     

The effect of pulsed laser annealing on the nickel silicide formation

The pulsed laser annealing (PLA) is used to assist nickel silicide transformation for Schottky barrier height reduction and tensile strain enhancement and the effect of different laser power are investigated. In this report, a two-step annealing process which combine the conventional rapid thermal annealing with pulsed laser annealing is proposed to achieve a smooth silicon-rich NiSi_x interfacial layer on (1 0 0) silicon. With optimized laser energy, a 0.2 eV Schottky barrier height (SBH) modulation is observed from Schottky diode electrical characterization. Furthermore, PLA provides sufficient effective temperature during silicidation which also lead to increased tensile stress of silicide film than the two-step RTA silicide is also investigated. The SBH modulation and tensile stress enhancement benefits of PLA silicidation are considered as an alternative to the conventional rapid thermal annealing for ultra-scaled devices performance enhancement.     

High‐Tg Carbazole Derivatives as Blue‐Emitting Hole‐Transporting Materials for Electroluminescent Devices

A series of dicarbazolyl derivatives bridged by various aromatic spacers and decorated with peripheral diarylamines were synthesized using Ullmann and Pd‐catalyzed C–N coupling procedures. These derivatives emit blue light in solution. In general, they possess high glass‐transition temperatures (T_g > 125 °C) which vary with the bridging segment and methyl substitution on the peripheral amine. Double‐layer organic light‐emitting devices were successfully fabricated using these molecules as hole‐transporting and emitting materials. Devices of the configuration ITO/HTL/TPBI/Mg:Ag (ITO: indium tin oxide; HTL: hole‐transporting layer; TPBI: 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene) display blue emission from the HTL layer. The EL spectra of these devices appear slightly distorted due to the exciplex formation at the interfaces. However, for the devices of the configuration ITO/HTL/Alq₃/Mg:Ag (Alq₃ = tris(8‐hydroxyquinoline)aluminum) a bright green light from the Alq₃ layer was observed. This clearly demonstrates the facile hole‐transporting property of the materials described here.     

Dual‐Targeted Photopenetrative Delivery of Multiple Micelles/Hydrophobic Drugs by a Nanopea for Enhanced Tumor Therapy

A photoresponsive pea‐like capsule (nanopea) that also represents a photothermal agent is constructed by wrapping multiple polymer micelles (polyvinyl alcohol, PVA) in reduced graphene oxide nanoshells through a double emulsion approach. Resulting nanopeas can transport multiple PVA micelles containing the fully concealed hydrophobic drug docetaxel (DTX) which can be later released by a near‐infrared photoactuation trigger. Through integrating the rod‐shaped adhesion and lactoferrin (Lf) targeting, the nanopea enhances both uptake by cancer cellc in vitro and particle accumulation at tumor in vivo. A photopenetrative delivery of micelles/DTX to the tumor site is actuated by NIR irradiation which ruptures the nanopeas as well as releases nanosized micelles/DTX. This trigger also results in thermal damage to the tumor and increases the micelles/DTX permeability, facilitating drug penetration into the deep tumor far from blood vessels for thermal chemotherapy. This nanopea with the capability of imaging, enhanced tumor accumulation, NIR‐triggered tumor penetration, and hyperthermia ablation for photothermal chemotherapy boosts tumor treatment and shows potential for use in other biological applications.     

InGaAs/InGaAsP MQW optical amplifier integrated withgrating-assisted vertical-coupler noise filter

A photonic integrated circuit with an InGaAs/InGaAsP multiple-quantum-well (MQW) traveling-wave optical amplifier and a grating-assisted vertical-coupler filter as a noise filter have been demonstrated. A fiber-to-amplifier/filter gain of ~0.5 dB and a 3-dB filter bandwidth (FWHM) of ~70 Å at 1.56 μm filter center wavelength have been achieved. This photonic circuit is potentially suitable as a building-block for preamplifier lightwave receivers or high-gain, high-power optical amplifiers which are essential for optical communication systems and lightwave networks     

2 cm long monolithic multisection laser for active modelocking at 2.2 GHz

A 2 cm long three-contact multisection laser has been fabricated for modelocking at very low repetition rates. Active modelocking yields 8.0-12.3 ps pulses at 2.2, 4.3 and 6.5 GHz corresponding to the fundamental, first, and second harmonics of the cavity resonance frequency. This device demonstrates the feasibility of fabricating monolithic pulse sources operating at rates as low as the OC-48 Sonet transmission rate (2.488 Gbit/s).<>     

A discussion of the methods for comparing the relative effectiveness of phosphate fertilizers varying in solubility

Because various phosphate (P) fertilizers differ widely in their solubility, it is commonly observed that crop response to P fertilizers varies under the same soil and crop conditions. Furthermore, a major problem encountered in the methods for determining the relative effectiveness (RE) of water-insoluble P fertilizer (e.g., phosphate rock) with respect to water-soluble P fertilizers, e.g., single superphosphate (SSP) and triple superphosphate (TSP), is that their growth response curves are usually nonlinear and often do not share a common maximum yield. In this paper, we review and discuss the advantages and disadvantages of the three most commonly used methods for calculating the RE of phosphate rock with respect to TSP (or SSP). The three methods are vertical comparison, horizontal (substitution rate) comparison, and linear-response comparison.     

Safety Evaluation of Green Tea Polyphenols Consumption in Middle‐aged Ovariectomized Rat Model

This work evaluates chronic safety in middle‐aged ovariectomized rats supplemented with different dosages of green tea polyphenols (GTP) in drinking water. The experiment used 6‐mo‐old sham (n = 39) and ovariectomized (OVX, n = 143) female rats. All sham (n = 39) and 39 of the OVX animals received no GTP treatment and their samples were collected for outcome measures at baseline, 3 mo, and 6 mo (n = 13 per group for each). The remaining OVX animals were randomized into 4 groups receiving 0.15%, 0.5%, 1%, and 1.5% (n = 26 for each) of GTP (wt/vol), respectively, in drinking water for 3 and 6 mo. No mortality or abnormal treatment‐related findings in clinical observations or ophthalmologic examinations were noted. No treatment‐related macroscopic or microscopic findings were noted for animals administered 1.5% GTP supplementation. Throughout the study, there was no difference in the body weight among all OVX groups. In all OVX groups, feed intake and water consumption significantly decreased with GTP dose throughout the study period. At 6 mo, GTP intake did not affect hematology, clinical chemistry, and urinalysis, except for phosphorus and blood urea nitrogen (increased), total cholesterol, lactate dehydrogenase, and urine pH (decreased). This study reveals that the no‐observed‐adverse‐effect level (NOAEL) of GTP is 1.5% (wt/vol) in drinking water, the highest dose used in this study.