Cenosphere filled aluminum syntactic foam made through stir-casting technique

Cenospheres in the range of 30–50 vol.% were used as space holders for making syntactic aluminum foam having density 1.5–1.9 gm/cc using stir-casting technique. The synthesized syntactic foam (SF) was characterized in terms of microstructures, hardness and compressive deformation behaviour. It was noted that the SF behaves like a high strength aluminium foam under compressive deformation exhibiting flat plateau region in the stress–strain curves. The plateau stress of SF decreases with cenosphere volume fraction vis-à-vis porosity following a power law relationship. But, the densification strain increases linearly with cenosphere volume fraction.     

Experimental determination of thermal conductivity of three nanofluids and development of new correlations

Experimental investigations have been carried out for determining the thermal conductivity of three nanofluids containing aluminum oxide, copper oxide and zinc oxide nanoparticles dispersed in a base fluid of 60:40 (by mass) ethylene glycol and water mixture. Particle volumetric concentration tested was up to 10% and the temperature range of the experiments was from 298 to 363 K. The results show an increase in the thermal conductivity of nanofluids compared to the base fluids with an increasing volumetric concentration of nanoparticles. The thermal conductivity also increases substantially with an increase in temperature. Several existing models for thermal conductivity were compared with the experimental data obtained from these nanofluids, and they do not exhibit good agreement. Therefore, a model was developed, which is a refinement of an existing model, which incorporates the classical Maxwell model and the Brownian motion effect to account for the thermal conductivity of nanofluids as a function of temperature, particle volumetric concentration, the properties of nanoparticles, and the base fluid, which agrees well with the experimental data.     

Isolation and evaluation of a high H2-producing lab isolate from cow dung

Hydrogen producing bacterial strain was isolated from Indian cow dung and identified of the bacterial family Enterobacteriaceae. This lab isolate was differentiated from Citrobacter Y-19 at molecular level by using RAPD, PCR based technique, and OPO-03₄₆₀ and OPO-17₈₀₀ RAPD marker for this specific strain (lab isolate) was identified. Fermentative studies were investigated for important parameters, starting with pH of the culture, temperature, inoculum age and inoculum volume, initial substrate concentration and different substrates. Among different substrates, dextrose and sucrose were the preferred substrates for hydrogen production. The optimal starting pH of the culture was found to be 5.0. The H₂ production increased with increase in temperature up to 30 °C. The maximum value of H₂ production was recorded when inoculum volume was 12.5% of the culture broth and inoculum age was 14 h. Under batch fermentation conditions, the maximum hydrogen production rate and yield were 355.2 ml l⁻¹ h⁻¹ and 2.1 mol/mol glucose (conversion 35%), respectively. These results indicate that this lab isolate is an ideal hydrogen producer.     

Biosorption of cadmium (II) and lead (II) from aqueous solutions using mushrooms: A comparative study

Sorption capacity of oyster mushroom (Pleurotus platypus), button mushroom (Agaricus bisporus) and milky mushroom (Calocybe indica) were evaluated on biosorption of heavy metals, viz. cadmium (II) and lead (II) from aqueous solutions. The optimum sorption conditions were studied for each metal separately. The desired pH of the aqueous solution was found to be 6.0 for the removal of cadmium (II) and 5.0 for removal of lead (II) for all the mushrooms. The percent removal of both the metals was found to increase with the increase in biosorbent dosage and contact time. The fitness of the biosorption data for Langmuir and Freundlich adsorption models was investigated. It was found that biosorption of cadmium (II) and lead (II) ions onto the biomass of the three mushrooms were better suitable to Langmuir than Freundlich adsorption model. P. platypus showed the highest metal uptake potential for cadmium (q_max 34.96 mg/g) whereas A. bisporus exhibited maximum potential for lead (q_max 33.78 mg/g). Milky mushroom showed the lowest metal uptake capacity for both the metals. The present data confirms that mushrooms may be used as efficient biosorbent for the removal of cadmium (II) and lead (II) ions from aqueous solution.     

The flexible PEI composites

The present study investigates the compatibilizing effect of polyphosphazene on the blends of poly(ether imide) (PEI) and thermotropic liquid crystalline polymer (Vectra‐B). FTIR study showed that there was a partial interaction or chemical reaction between the PEI and LCP in the presence of compatibilizer. Polyphosphazene is compatibilized with both PEI and LCP, which was evident from DMA results. From the X‐ray diffraction study, it has been observed that the crystalline structure of PEI–LCP blends was increased with the addition of compatibilizer. The thermal study of the composites has been studied by DTA/thermo gravimetric analyses (TGA). TGA thermograms showed an increase in decomposition temperature of PEI–LCP blends in the presence of compatibilizer. Measurement of the tensile properties showed an increase in the elongation as well as enhanced modulus and strength. From SEM micrographs of tensile fractured surfaces, the addition of compatibilizer to PEI–LCP blends was found to increase the adhesion between the matrix and the dispersed phase. POLYM. COMPOS., 27:533–538, 2006. © 2006 Society of Plastics Engineers     

Arsenic groundwater contamination and its health effects in the state of Uttar Pradesh (UP) in upper and middle Ganga plain, India: a severe danger

This communication presents results of our 2-year survey on groundwater arsenic contamination in three districts Ballia, Varanasi and Gazipur of Uttar Pradesh (UP) in the upper and middle Ganga plain, India. Analyses of 4,780 tubewell water samples revealed that arsenic concentrations in 46.5% exceeded 10 microg/L, in 26.7%, 50 microg/L and in 10% 300 microg/L limits. Arsenic concentrations up to 3,192 microg//L were observed. The age of tubewells (n=1,881) ranged from less than a year to 32 years, with an average of 6.5 years. Our study shows that older tubewells had a greater chance of contamination. Depth of tubewells (n=3,810) varied from 6 to 60.5 m with a mean of 25.75 m. A detailed study in three administrative units within Ballia district, i.e. block, Gram Panchayet, and village was carried out to assess the magnitude of the contamination. Before our survey the affected villagers were not aware that they were suffering from arsenical toxicity through contaminated drinking water. A preliminary clinical examination in 11 affected villages (10 from Ballia and 1 from Gazipur district) revealed typical arsenical skin lesions ranging from melanosis, keratosis to Bowens (suspected). Out of 989 villagers (691 adults, and 298 children) screened, 137 (19.8%) of the adults and 17 (5.7%) of the children were diagnosed to have typical arsenical skin lesions. Arsenical neuropathy and adverse obstetric outcome were also observed, indicating severity of exposure. The range of arsenic concentrations in hair, nail and urine was 137-10,900, 764-19,700 microg/kg, and 23-4,030 microg/L, respectively. The urine, hair and nail concentrations of arsenic correlated significantly (r=0.76, 0.61, and 0.55, respectively) with drinking water arsenic concentrations. The similarity to previous studies on arsenic contamination in West Bengal, Bihar and Bangladesh indicates that people from a significant part of the surveyed areas in UP are suffering and this will spread unless drives to raise awareness of arsenic toxicity are undertaken and an arsenic safe water supply is immediately introduced.     

Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel

Abstract

The current research comprises of various machinability aspects of 4340 hardened alloy steel which are scrutinized with in context of improvements in main cutting force, tool flank wear, crater wear, surface roughness, micro-hardness, machined surface morphology, chip morphology, chip reduction coefficient and apparent coefficient of friction under three different cutting fluid applications i.e. compressed air, water soluble coolant and nanofluid (using eco-friendly radiator coolant as the base fluid and Al₂O₃ as the nanoparticle) using uncoated cermet cutting inserts and a comparative assessment was performed to select which fluid performed better in terms of various machining attributes among three cutting fluids. The minimum quantity lubrication technique (MQL) was used in which a smaller volume of coolant sprinkled at high pressure. This method is found as the most effective alternative to minimize health risks and machining costs, which is quite high in other setups. The test specimen was machined at three different cutting speeds i.e. 100, 120 and 140?m/min along with two machining parameters i.e. feed and depth of cut were kept constant respectively at 0.2?mm/rev and 0.4?mm. Outcomes made a conclusion that Al₂O₃ enriched ecofriendly nanocoolant outperformed both compressed air and water soluble coolant in terms of every machinability aspects.     

Noncoherent MMSE multiuser receivers and their blind adaptiveimplementations

Three noncoherent minimum mean-squared error (NMSE)-based multiuser receivers are proposed for multipulse modulation. These receivers have a common MMSE prefilter and are followed by one of three phase-independent decision rules. The simplest decision rule selects the maximum magnitude of the MMSE filter outputs, and the other two account for the second-order statistics of the residual multiple-access interference that remains after MMSE filtering. Blind adaptive algorithms are then proposed for the three noncoherent MMSE receivers. The common adaptive algorithm for the MMSE prefilter, which is based on the stochastic approximation method, is shown to converge in the mean-squared error sense to the nonblind NMSE prefilter. Our convergence analysis yields new insight into the tradeoff between the rate of convergence and the residual mean-squared error. The noncoherent blind receivers obtained here do not require the knowledge of the received signals of any of the interfering users, and are hence well-suited for distributed implementation in cellular wireless networks or in communication systems that must operate in noncooperative environments     

Simulation‐based performance evaluation of routing protocols for mobile ad hoc networks

In this paper we evaluate several routing protocols for mobile, wireless, ad hoc networks via packetlevel simulations. The ad hoc networks are multihop wireless networks with dynamically changing network connectivity owing to mobility. The protocol suite includes several routing protocols specifically designed for ad hoc routing, as well as more traditional protocols, such as link state and distance vector, used for dynamic networks. Performance is evaluated with respect to fraction of packets delivered, endtoend delay, and routing load for a given traffic and mobility model. Both small (30 nodes) and medium sized (60 nodes) networks are used. It is observed that the new generation of ondemand routing protocols use much lower routing load, especially with small number of peertopeer conversations. However, the traditional link state and distance vector protocols provide, in general, better packet delivery and endtoend delay performance.