Evaluation of Barkhausen Noise and Magnetoacoustic Emission Signals Properties for Plastically Deformed Armco Iron

The paper presents the results of the investigation of the influence of different modes of plastic deformation on the magnetoacoustic properties of Armco iron. Two sets of samples have been investigated—the first one consisted of preannealed samples that had been subsequently cold rolled, and the second one consisted of samples cut out from commercially available Armco plates, subjected to tensile loading. The process of cold rolling leads to the broadening of the envelopes and to the appearance of the third central peak [attributed to the domain-wall (DW) pinning]. In the case of the nonannealed samples, the Barkhausen envelope for the as-received sample reveals one, broad maximum that is transformed by the following tensile deformation initially into two and then three peaks. In order to detect subtle changes of the Barkhausen noise (BN) properties, a multiparameter [fast Fourier transform (FFT), pulse height distribution, wavelet transform] analysis was performed. As for the magnetoacoustic emission (MAE) signal, both deformation modes result in visible increase in peak separation as well as in the increase of the MAE intensity. As for the peak separation, it can be understood as the result of both the increase of the coercivity of the samples and the decrease of the slope of the B(H) loops since the MAE signal is generated mainly during creation/annihilation of DW occurring mainly at the “knee” regions of the B(H) loops.      

Discrete element modeling and experimental investigation of hot pressing of intermetallic NiAl powder

This paper presents the numerical and experimental analysis of hot pressing of NiAl powder with an emphasis on the best possible representation of its main stages: initial powder compaction and pressure-assisted sintering. The numerical study has been performed within the discrete element framework. In the paper, an original viscoelastic model of hot pressing has been used. In order to ensure that the applied values of material parameters in numerical simulations are appropriate, the reference literature has been reviewed. It produced the relations and equations to estimate the values of all required sintering material parameters of the considered viscoelastic model. Numerical simulations have employed the geometrical model of the initial dense specimen generated by a special algorithm which uses the real grain distribution of powder. The numerical model has been calibrated and validated through simulations of the real process of hot pressing of intermetallic NiAl material. The kinetics of compaction, sintering and cooling stage indicated by the evolution of density, shrinkage and densification rate have been studied. The comparison of numerical and experimental results has shown a good performance of the developed numerical model.     

Correction to Markon et al. (2011).

Reports an error in The reliability and validity of discrete and continuous measures of psychopathology: A quantitative review by Kristian E. Markon, Michael Chmielewski and Christopher J. Miller (Psychological Bulletin, 2011[Sep], Vol 137[5], 856-879). In the Samples section of Meta-Analysis 1: Reliability, third paragraph, the number of studies reporting data on clinical samples is incorrect. The sentence “Four studies included clinical samples, and eight studies included nonclinical samples” should read “Twenty-four studies included clinical samples, and eight studies included nonclinical samples.” (The following abstract of the original article appeared in record 2011-09705-001.) In 2 meta-analyses involving 58 studies and 59,575 participants, we quantitatively summarized the relative reliability and validity of continuous (i.e., dimensional) and discrete (i.e., categorical) measures of psychopathology. Overall, results suggest an expected 15% increase in reliability and 37% increase in validity through adoption of a continuous over discrete measure of psychopathology alone. This increase occurs across all types of samples and forms of psychopathology, with little evidence for exceptions. For typical observed effect sizes, the increase in validity is sufficient to almost halve sample sizes necessary to achieve standard power levels. With important caveats, the current results, considered with previous research, provide sufficient empirical and theoretical basis to assume a priori that continuous measurement of psychopathology is more reliable and valid. Use of continuous measures in psychopathology assessment has widespread theoretical and practical benefits in research and clinical settings. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Further validation of the IDAS: Evidence of convergent, discriminant, criterion, and incremental validity.

The authors explicated the validity of the Inventory of Depression and Anxiety Symptoms (IDAS; D. Watson et al., 2007) in 2 samples (306 college students and 605 psychiatric patients). The IDAS scales showed strong convergent validity in relation to parallel interview-based scores on the Clinician Rating version of the IDAS; the mean convergent correlations were .51 and .62 in the student and patient samples, respectively. With the exception of the Well-Being Scale, the scales also consistently demonstrated significant discriminant validity. Furthermore, the scales displayed substantial criterion validity in relation to Diagnostic and Statistical Manual of Mental Disorders (4th ed.; DSM-IV; American Psychiatric Association, 1994) mood and anxiety disorder diagnoses in the patient sample. The authors identified particularly clear and strong associations between (a) major depression and the IDAS General Depression, Dysphoria and Well-Being scales, (b) panic disorder and IDAS Panic, (c) posttraumatic stress disorder and IDAS Traumatic Intrusions, and (d) social phobia and IDAS Social Anxiety. Finally, in logistic regression analyses, the IDAS scales showed significant incremental validity in predicting several DSM-IV diagnoses when compared against the Beck Depression Inventory-II (A. T. Beck, R. A. Steer, & G. K. Brown, 1996) and the Beck Anxiety Inventory (A. T. Beck & R. A. Steer, 1990). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Design of patient-specific gait modifications for knee osteoarthritis rehabilitation

Abstract-Gait modification is a nonsurgical approach for reducing the external knee adduction torque in patients with knee osteoarthritis (OA). The magnitude of the first adduction torque peak in particular is strongly associated with knee OA progression. While toeing out has been shown to reduce the second peak, no clinically realistic gait modifications have been identified that effectively reduce both peaks simultaneously. This study predicts novel patient-specific gait modifications that achieve this goal without changing the foot path. The modified gait motion was designed for a single patient with knee OA using dynamic optimization of a patient-specific, full-body gait model. The cost function minimized the knee adduction torque subject to constraints limiting how much the new gait motion could deviate from the patient's normal gait motion. The optimizations predicted a "medial-thrust" gait pattern that reduced the first adduction torque peak between 32% and 54% and the second peak between 34% and 56%. The new motion involved three synergistic kinematic changes: slightly decreased pelvis obliquity, slightly increased leg flexion, and slightly increased pelvis axial rotation. After gait retraining, the patient achieved adduction torque reductions of 39% to 50% in the first peak and 37% to 55% in the second one. These reductions are comparable to those reported after high tibial osteotomy surgery. The associated kinematic changes were consistent with the predictions except for pelvis obliquity, which showed little change. This study demonstrates that it is feasible to design novel patient-specific gait modifications with potential clinical benefit using dynamic optimization of patient-specific, full-body gait models. Further investigation is needed to assess the extent to which similar gait modifications may be effective for other patients with knee OA.     

Are patient-specific joint and inertial parameters necessary for accurate inverse dynamics analyses of gait?

Variations in joint parameter (JP) values (axis positions and orientations in body segments) and inertial parameter (IP) values (segment masses, mass centers, and moments of inertia) as well as kinematic noise alter the results of inverse dynamics analyses of gait. Three-dimensional linkage models with joint constraints have been proposed as one way to minimize the effects of noisy kinematic data. Such models can also be used to perform gait optimizations to predict post-treatment function given pre-treatment gait data. This study evaluates whether accurate patient-specific JP and IP values are needed in three-dimensional linkage models to produce accurate inverse dynamics results for gait. The study was performed in two stages. First, we used optimization analyses to evaluate whether patient-specific JP and IP values can be calibrated accurately from noisy kinematic data, and second, we used Monte Carlo analyses to evaluate how errors in JP and IP values affect inverse dynamics calculations. Both stages were performed using a dynamic, 27 degrees-of-freedom, full-body linkage model and synthetic (i.e., computer generated) gait data corresponding to a nominal experimental gait motion. In general, JP but not IP values could be found accurately from noisy kinematic data. Root-mean-square (RMS) errors were 3 degrees and 4 mm for JP values and 1 kg, 22 mm, and 74 500 kg * mm2 for IP values. Furthermore, errors in JP but not IP values had a significant effect on calculated lower-extremity inverse dynamics joint torques. The worst RMS torque error averaged 4% bodyweight * height (BW * H) due to JP variations but less than 0.25% (BW * H) due to IP variations. These results suggest that inverse dynamics analyses of gait utilizing linkage models with joint constraints should calibrate the model's JP values to obtain accurate joint torques.     

A degeneracy study in the circulant and bordered-circulant approach to birdcage and planar coils

A method for finding closed-form solutions for the normal mode frequencies of systems with circulant symmetry was investigated. This method is particularly useful for questions of degeneracy that arise when one considers parallel imaging techniques like SENSE and SMASH in MRI. It is applicable to systems that include birdcage coils as well as planar coils with the appropriate rotational symmetry. A proof is given that complete degeneracy of all normal mode frequencies is impossible when all mutual inductive couplings are included. We tested the method against measurements made on a planar coil array and on an 8-element birdcage coil. The inclusion of the co-rotating end-ring mode changes the fundamental symmetry of the system from circulant to 'bordered circulant.' Closed-form solutions for the normal mode frequencies of a bordered circulant system are also given.     

Thermal inactivation of avian influenza virus and Newcastle disease virus in a fat-free egg product

High-pathogenicity avian influenza (HPAI) virus, low-pathogenicity avian influenza (LPAI) virus, virulent Newcastle disease virus (vNDV) and low-virulent Newcastle disease virus (lNDV) can be present on the eggshell surface, and HPAI viruses and vNDV can be present in the internal contents of chicken eggs laid by infected hens. With the increase in global trade, egg products could present potential biosecurity problems and affect international trade in liquid and dried egg products. Therefore, the generation of survival curves to determine decimal reduction times (D(T)-values) and change in heat resistance of the viruses (z(D)-value) within fat-free egg product could provide valuable information for development of risk reduction strategies. Thermal inactivation studies using A/chicken/Pennsylvania/1370/83 (H5N2) HPAI virus resulted in D(55)-, D(56)-, D(56.7)-, D(57)-, D(58)-, and D(59)-values of 18.6, 8.5, 3.6, 2.5, 0.4, and 0.4 min, respectively. The z(D)-value was 4.4 °C. LPAI virus A/chicken/New York/13142/94 (H7N2) had D(55)-, D(56.7)-, D(57)-, D(58)-, D(59)-, and D(60)-values of 2.9, 1.4, 0.8, 0.7, 0.7, and 0.5 min, respectively, and a z-value of 0.4 °C. vNDV avian paramyxoviruses of serotype 1 (AMPV-1)/chicken/California/212676/2002 had D(55)-, D(56)-, D(56.7)-, D(57)-, D(58)-, and D(59)-values of 12.4, 9.3, 6.2, 5, 3.7, and 1.7 min, respectively. The z(D)-value was 4.7 °C. lNDV AMPV-1/chicken/United States/B1/1948 had D(55)-, D(57)-, D(58)-, D(59)-, D(61)-, and D(63)-values of 5.3, 2.2, 1.1, 0.55, 0.19, and 0.17 min, respectively, and a z(D)-value of 1.0 °C. Use of these data in developing egg pasteurization standards for AI and NDV-infected countries should allow safer trade in liquid egg products.