Impact of traffic localization on communication rates in ad-hoc networks

The effect of traffic distribution on communication rates and receiver complexity in ad-hoc networks is addressed, considering a network with constant density of users and a certain traffic model. Information theoretic upper bounds on communication rates are derived under an assumption that transmitting nodes as well as receiving nodes cooperate. It is shown that for the case of large signal attenuation the bounds hold even when the cooperation among users is limited to a certain region of the network domain. Furthermore, achievability bounds on communication rates are derived. The bounds rely on two proposed local cooperation strategies. A comparison shows that the upper bounds are tight and closely follow the achievability results. Finally, the impact of traffic localization on the receiver complexity is addressed.     

Scaling of analog LDPC decoders in sub-100 nm CMOS processes

Analog implementations of digital error control decoders, generally referred to as analog decoding, have recently been proposed as an energy and area competitive methodology. Despite several successful implementations of small analog error control decoders, little is currently known about how this methodology scales to smaller process technologies and copes with the non-idealities of nano-scale transistor sizing. A comprehensive analysis of the potential of sub-threshold analog decoding is examined in this paper. It is shown that mismatch effects dominated by threshold mismatch impose firm lower limits on the sizes of transistors. The effect of various forms of leakage currents is also investigated and minimal leakage current to normalizing currents are found using density evolution and control simulations. Finally, the convergence speed of analog decoders is examined via a density evolution approach. The results are compiled and predictions are given which show that process scaling below 90 nm processes brings no advantages, and, in some cases, may even degrade performance or increase required resources.     

SCR operation mode of diode strings for ESD protection

Diodes and diode strings in 90 nm and beyond technologies are investigated by measurement and device simulation. After a thorough calibration, the device simulator is utilised to achieve a better understanding and an enhanced device performance of diode strings under static and transient ESD conditions. Thereto, parasitic transistors and a so far neglected parasitic thyristor (SCR) in the diode string are regarded, exploited and optimised.     

Cooperative Distributed MIMO Channels in Wireless Sensor Networks

The large number of network nodes and the energy constraints make Wireless Sensor Networks (WSN) one of the most important application fields for Cooperative Diversity. Node cooperation increases the spatial diversity of wireless channels and, thus, reduces the transmitted power. In this paper, we propose a multi-hop WSN with nodes grouped in cooperative clusters that exploits transmit and receive cooperation among cluster nodes. Multi-hop transmission is carried out by concatenating single cluster-to-cluster hops, where every cluster-to-cluster link is defined as a cooperative distributed multiple-input-multiple-output (MIMO) channel. Transmit diversity is exploited through a time-division, decoder-and-forward, relaying scheme based upon two time slots: the Intracluster Slot, used for data sharing within the cluster, and the Intercluster Slot, used for transmission between clusters. At the receiver side, a distributed reception protocol is devised based upon a Selection Diversity algorithm. The proposed multi-hop cooperative WSN is optimally designed for minimum end-to-end outage probability by deriving the optimum time and power allocated on the intracluster and intercluster slots of every single hop, given a per-link energy constraint. A simplified suboptimum resource allocation is also proposed, which performs close to the optimal policy. Results show that the proposed scheme achieves diversity equal to the equivalent MIMO system and significantly reduces energy consumption with respect to. the non-cooperative channel     

An analytic method to predict the thermal map of cryosurgery iceballs in MR images

This paper presents a newly developed method to estimate, in magnetic resonance (MR) images, the temperatures reached within the volume of an iceball produced by a cryogenic probe. Building on the direct measurements of the MR signal intensity and its correlation with independent temperature variations at the phase transition from liquid to solid, the thermal information embedded in the images was accessed. The volume and diameter of the growing iceball were estimated from a time series of MR images. Using regressions over the volume in the time and thermal domains, this method predicted the cryogenic temperatures beyond the range of sensitivity of the MR signal itself. We present a validation of this method in samples of gelatin and ex vivo pig liver. Temperature predictions are shown to agree with independent thermosensor readings over a range extending from 20 degrees C down to -65 degrees C, with an average error of less than 6 degrees C.     

A Cooperative Nearest Neighbours Topology Control Algorithm for Wireless Ad Hoc Networks

In this article, we introduce a simple distributed algorithm that assigns appropriate individual transmission powers to devices in a wireless ad hoc network. In contrast to many other proposed algorithms, it does without special hardware. It requires only local neighbourhood information and therefore avoids flooding information throughout the network. Finally, the cooperative nature of the algorithm avoids that devices cause excessive interference by using unnecessarily high transmission powers. By means of simulation, we show that the topologies created by this algorithm without any global knowledge are as effective as topologies resulting from a good choice of a common transmission power (which would require global knowledge) in terms of the achievable throughput. This work was supported in part by the German Federal Ministry of Education and Research (BMBF) as part of the IPonAir project.     

Thermal Stress Assessment for Transient Liquid-Phase Bonded Si Chips in High-Power Modules Using Experimental and Numerical Methods

The potential of transient liquid-phase (TLP) bonding for chip packaging applications has been evaluated, focusing on three interlayer arrangements (Ag-Sn-Ag, Ni-Sn-Ni, and Ag-Sn-Ni). Shear tests on TLP-bonded components provided the interlayer-dependent mechanical strength as well as failure mode and position. Critical local stresses, i.e., failure criteria, within the intermetallic compound (IMC) layer were derived by replicating the shear test conditions with finite-element methods. The missing coefficient of thermal expansion for Ag₃Sn IMC was obtained by producing small IMC bulk samples and subjecting them to dilatometric measurements. The experimental results were implemented into a finite-element model of a representative power module architecture to provide first predictions on thermally induced residual stresses that could be classified into fail/safe, as successfully validated by TLP chip bonding experiments. A numerical parameter study then assessed thermal stresses, including failure prediction and design optimization for TLP-bonded Si chips, considering the influence of process temperature, service conditions, TLP interlayer system, and metallization layers within the TLP joint. The presented procedure serves as a guideline to choose an appropriate TLP interlayer system for predefined boundary conditions, or vice versa.     

Targeted Delivery of Anesthetic Agents to Bone Tissues using Conductive Microneedles Enhanced Iontophoresis for Painless Dental Anesthesia

Pain management during dental procedures is a cornerstone for successful daily practice. In current practice, the traditional needle and syringe injection is used to administer local anesthesia. However, the appearance of long needles and the pain associated with it often leads to dental anxiety deterring timely interventions. Microneedles (MNs) have emerged as a minimally invasive alternative to hypodermic needles and shown to be effective in transdermal drug delivery applications. In this article, the potential use of MNs for local anesthesia delivery in dentistry is explored. The development of a novel conductive MN array that can be used in combination with iontophoresis technique to achieve drug penetration through the oral mucosa and the underlying bone tissue is presented. The conductive MN array plays a dual-role, creating micro-conduits and lowering the resistance of the oral mucosa. The reduced tissue resistance further enhances the application of a low-voltage current that is able to direct and accelerate the drug molecules to target the sensory nerves supplying teeth. The successful delivery of lidocaine using this new strategy in a clinically relevant rabbit incisor model is shown to be as effective as the current gold standard.     

Photonic Side-Channel Analysis of Arbiter PUFs

As intended by its name, physically unclonable functions (PUFs) are considered as an ultimate solution to deal with insecure storage, hardware counterfeiting, and many other security problems. However, many different successful attacks have already revealed vulnerabilities of certain digital intrinsic PUFs. This paper demonstrates that legacy arbiter PUF and its popular extended versions (i.e., feed-forward and XOR-enhanced) can be completely and linearly characterized by means of photonic emission analysis. Our experimental setup is capable of measuring every PUF internal delay with a resolution of 6 ps. Due to this resolution, we indeed require only the theoretical minimum number of linear independent equations (i.e., physical measurements) to directly solve the underlying inhomogeneous linear system. Moreover, it is not required to know the actual PUF responses for our physical delay extraction. We present our practical results for an arbiter PUF implementation on a complex programmable logic device manufactured with a 180 nm process. Finally, we give an insight into photonic emission analysis of arbiter PUF on smaller chip architectures by performing experiments on a field programmable gate array manufactured with a 60 nm process.