Effect of Temperatures up to 90°C on the Early Hydration of Portland–Blastfurnace Slag Cements

Isothermal conduction calorimetry has been used to monitor the early hydration of Portland–blastfurnace slag (BFS)-blended cements. Portland:BFS composite cements with ordinary Portland cement replacements from 0 to 90 wt% were studied at curing temperatures from 12° to 90°C. Peak II, principally associated with alite (Ca₃SiO₅) hydration, was accelerated with increasing temperature for all blends. Peak S, associated with BFS hydration, was particularly noticeable at 40° and 60°C. At higher curing temperatures, peak S merged with peak II, indicating thermal activation of BFS. Novel plots of total heat output against percentage replacement show that BFS contributes to the heat of hydration, even at temperatures below its thermal activation.     

MA‐NOTMP: A Triazacyclononane Trimethylphosphinate Based Bifunctional Chelator for Gallium Radiolabelling of Biomolecules

In the past few years, gallium‐68 has demonstrated significant potential as a radioisotope for positron emission tomography (PET), and the optimization of chelators for gallium coordination is a major goal in the development of radiopharmaceuticals. Methylaminotriazacyclononane trimethylphosphinate (MA‐NOTMP), a new C‐functionalized triazacyclononane derivative with phosphinate pendant arms, presents excellent coordination properties for ⁶⁸Ga (low ligand concentration, labelling at low pH even at room temperature). A “ready‐to‐be‐grafted” bifunctional chelating agent (p‐NCS‐Bz‐MA‐NOTMP) was prepared to allow ⁶⁸Ga labelling of sensitive biological vectors. Conjugation to a bombesin_(7–14) derivative was performed, and preliminary in vitro experiments demonstrated the potential of MA‐NOTMP in the development of radiopharmaceuticals. This new chelator is therefore of major interest for labelling sensitive biomolecules, and further in vivo experiments will soon be performed.     

Barrier effect of flame retardant systems in poly(methyl methacrylate): Study of the efficiency of the surface treatment by octylsilane of silica nanoparticles in combination with phosphorous fire retardant additives

In this work, flame retardant systems comprising ammonium polyphosphate (AP423) and hydrophilic (A200) or hydrophobic (R805) nanometric silica were incorporated into PMMA. The following techniques were performed to detail the fire behaviour of the composites: mass loss cone calorimetry, pyrolysis‐combustion flow calorimetry, pyrolysis‐gas chromatography–mass spectrometry, thermogravimetric analysis, X‐ray diffraction analysis, Fourier transform infrared spectroscopy and microscopic observations. The best fire behaviour was obtained with the surface‐treated silica in the presence of AP423. The formation of a new crystalline phase from the interactions between AP423 and R805 silica and a strong barrier effect due to a layered residue were the main modes of action of this system. Moreover, we have shown that the difference between the AP423 + R805 and AP423 + A200 systems was due to poor dispersion of the silica into the PMMA matrix in the latter formulation. Copyright © 2011 John Wiley & Sons, Ltd.     

Chemical modification of hemp fibers by silane coupling agents

Natural hemp fibers were chemically modified using silane coupling agents to reduce their hydrophilic character. The existence of a chemical bond between coupling agents and hemp fibers was confirmed by ATR‐FTIR spectroscopy, ²⁹Si Nuclear Magnetic Resonance (NMR), thermogravimetric analysis (TGA), energy dispersive spectroscopy (EDS), and BET surface area measurements. It was shown that the initial concentration and the chemical structure of the organosilane coupling agent have an effect on the grafted quantity on the hemp fiber surfaces. The grafted quantity increased proportionally to the initial concentration of silane molecules. The presence of polar amino end group (NH₂) in silane structure can cause an increase in the grafted quantity, compared with results obtained in the case of silane molecules containing methacryloxy groups. This effect is attributed to the formation of hydrogen bonds between NH₂ and unreacted hydroxyl groups of hemp fibers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Chemical Stability of α‐Tocopherol in Colloidal Lipid Particles with Various Morphologies

Colloidal lipid particles (CLPs) are promising encapsulation systems for lipophilic bioactives, such as oil‐soluble antioxidants that are applied in food and pharmaceutical formulations. Currently, there is no clear consensus regarding the relation between particle structure and the chemical stability of such bioactives. Using α‐tocopherol as a model antioxidant, it is shown that emulsifier type (Tween 20 or 40, or sodium caseinate) and lipid composition (tripalmitin, tricaprylin, or combinations thereof) modulated particle morphology and antioxidant stability. The emulsifier affects particle shape, with the polysorbates facilitating tripalmitin crystallization into highly ordered lath‐like particles, and sodium caseinate resulting in less ordered spherical particles. The fastest degradation of α‐tocopherol is observed in tripalmitin‐based CLPs, which may be attributed to its expulsion to the particle surface induced by lipid crystallization. This effect is stronger in CLPs stabilized by Tween 40, which may act as a template for crystallization. This work not only shows how the architecture of CLPs can be controlled through the type of lipid and emulsifier used, but also gives evidence that lipid crystallization does not necessarily protect entrapped lipophilic bioactives, which is an important clue for encapsulation system design. Practical Applications: Interest in enriching food and pharmaceutical products with lipophilic bioactives such as antioxidants through encapsulation in lipid particles is growing rapidly. This research suggests that for efficient encapsulation, the particle architecture plays an important role; to tailor this, the contribution of both the lipid carrier and the emulsifier needs to be considered.     

Effect of the plant waste onto the properties of use and the microstructure of phyllosilicates based ceramics

The present study aimed at using plant waste (Musa Paradisiaca) for manufacturing clay-based ceramics in order to promote lower sintering temperature while preserving the properties of use. Two kaolinic-illitic clays (NZ1 and KO) from Central African Republic were used mixed with 1 to 10 mass% of the plant waste (MP). The clays and the waste exhibited accessory phases: quartz and iron oxides, and K₂O respectively. MP was collected, dried and sieved (<100 μm) previously to its mixture with clays. According to the sintering behavior of KO and NZ1 derived from thermodilatometry, the densification was obtained after firing at 1200°C. Results showed that open porosity decreased from 35% to 17% with increasing temperature in the range 900 to 1200°C for KO and NZ1. This porosity remained in the range 30%-40% while increasing the MP content (firing at 1000°C for 1h.). The optimized MP content was 3 and 5 mass% for KO and NZ1 clay materials respectively. The compressive strength and thermal conductivities were improved compared to clay samples without MP fired at 1200°C. Moreover a significant decrease in the sintering temperature was achieved, leading to energy saving in line with sustainability issues.     

Pheromonal Cues Deposited by Mated Females Convey Social Information about Egg-Laying Sites in <Emphasis Type="Italic">Drosophila Melanogaster</Emphasis>

Individuals can make choices based on information learned from others, a phenomenon called social learning. How observers differentiate between which individual they should or should not learn from is, however, poorly understood. Here, we showed that Drosophila melanogaster females can influence the choice of egg-laying site of other females through pheromonal marking. Mated females mark territories of high quality food by ejecting surplus male sperm containing the aggregation pheromone cis-11-vaccenyl acetate (cVA) and, in addition, deposit several sex- and species-specific cuticular hydrocarbon (CHC) pheromones. These pheromonal cues affect the choices of other females, which respond by preferentially laying eggs on the marked food. This system benefits both senders and responders, as communal egg laying increases offspring survival. Virgin females, however, do not elicit a change in the egg-laying decision of mated females, even when food has been supplemented with ejected sperm from mated females, thus indicating the necessity for additional cues. Genetic ablation of either a female’s CHC pheromones or those of their mate results in loss of ability of mated females to attract other females. We conclude that mated females use a pheromonal marking system, comprising cVA acquired from male ejaculate with sex- and species-specific CHCs produced by both mates, to indicate egg-laying sites. This system ensures information reliability because mated, but not virgin, females have both the ability to generate the pheromone blend that attracts other flies to those sites and a direct interest in egg-laying site quality.     

New alginate foams: Box‐Behnken design of their manufacturing; fire retardant and thermal insulating properties

A new method for preparing alginate foams with progressive release of copper in the presence of sodium lauryl sulfate (SLS, foaming agent) has been designed. Copper acts as the ionotropic gelling agent through the reaction of copper carbonate with gluconolactone. The process does not require freeze‐drying contrarily to the conventional method used for preparing macroporous alginate foams. The new materials investigated in this study have remarkable thermal properties, including thermal conductivity lower than 0.041 W m^?1 K^?1 and low heat release (below 2 kJ g^?1), which allows labeling these foams self‐extinguishing materials. An experimental design methodology, based on a Box‐Behnken plan with three parameters and three levels, is successfully used for evaluating the impact of the amounts of alginate, SLS, and copper carbonate on the productivity, apparent density, and shrinking at air‐drying. It yielded an optimization of the process for the manufacturing of light, and stable/rigid insulating and thermally stable materials. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45868.