Predicting Blast Waves from the Axial Direction of a Cylindrical Charge

Bare, cylindrical, explosive charges produce secondary shock waves in the direction of least presented area. Whilst the source of these shock waves was explored in the 1940’s, no attempt was made to predict them. This paper describes the detonation of bare, cylindrical charges of PE4 (RDX binder 88/12 %), mass 0.2 to 0.46 kg and with a length to diameter ratio of 4 to 1. High speed camera footage showed (i) the formation of the separate, primary, shock waves from the sides and ends of the charge, (ii) Mach reflection of these separate shock waves, giving rise to reflected, secondary shock waves, and (iii) the secondary shock waves catching and merging with the primary shock wave. In the axial direction, the secondary shock wave’s peak overpressure and impulse exceeded that of the primary shock wave for scaled distances, Z=R/M^1/3 ≥3.9 m kg^−1/3, where M is the mass in kg and R the distance from the charge in m. It was found possible to predict the primary peak overpressure, P, at all distances in the axial direction, for a constant length to diameter ratio, using P=3075 Z⁻³−1732 Z⁻²+305 Z⁻¹. Close in the primary peak overpressure is proportional to M/R³ in the axial direction. It was not possible to predict the secondary peak overpressure with the data obtained. The total impulse from both shock waves, I, in the axial direction can be predicted using I=746(M^2/3/R)³−708(M^2/3/R)²+306(M^2/3/R).     

一种新颖的双桥矩阵变换器控制策略

矩阵变换器是一种AC/AC变换器,它具有正弦输入电流、正弦输出电压、能量双向流动及体积小的优点,但存在着控制方法复杂,开关器件和保护元器件太多的问题.近年来提出的双桥矩阵变换器具有矩阵变换器的优点,同时其控制方法更简单,所用开关元件数目更少.论述了双桥矩阵变换器的原理,讨论了变换器的PWM控制策略以及基于线电压符号的换流方法,提出了整流级、逆变级单独控制,整流级开关频率为10kHz、逆变级开关频率为2kHz的新颖双桥矩阵变换器方案,给出了仿真和实验结果.     

Vocal learning in the grey parrot (Psittacus erithacus): Effects of species identity and number of trainers.

Grey parrots (Psittacus erithacus) learn referential English labels when they view and interact with 2 humans who model vocal labeling and who demonstrate referentiality and functionality of a label (I. M. Pepperberg, 1990a). To test if both trainers are necessary, the authors contrasted 2-trainer modeling with training by 1 human who presented targeted labels to a bird in concert with appropriate items, who asked questions, and who would reward attempts at the label with the item. The bird was also tutored by either 1 or 2 interactive humans in conjunction with a conspecific who already used referential labels. Referential labels were learned from multiple live tutors but not a single trainer. Presence of a conspecific enhanced learning compared with single-trainer sessions but did not affect acquisition in 2-human sessions. Specific aspects of paired tutoring seem critical for acquiring referential vocal labels. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

TERRA COTTA KILN SLAB INVESTIGATION1

Following several discussions as to the constitution of a good kiln slab for terra cotta manufacture, a coöperative test was made in which slabs of various compositions were manufactured by a producer of refractories, tested under actual service conditions, and physical measurements were determined by the Ceramic Department, Rutgers University. Series included the use of tight-firing medium refractory clays, open-firing refractory clays with grog, both vitreous and porous. Grogs were sized (definite proportions of size ranges constituting the different members). Conclusions were drawn as to effect of all these variables.     

创意自然

<正>当今,人类与自然不和谐、不符合自然规律的关系普遍存在。从农业砍伐森林、筑坝发电,到工业污染物充斥的空气,这些互动往往意味着破坏。即使破坏性的干预措施被更富有创意的措施取代,这种不和谐仍然存在。     

Concentration and distribution of heavy metals in urban airborne particulate matter in Frankfurt am Main, Germany

Heavy metal concentrations were measured in airborne dust collected at three sites with different traffic densities from August 2001 to July 2002 in the Frankfurt am Main area. Bulk samples of particulate matter (PM) with an aerodynamic equivalent diameter of <22 microm were collected on cellulose nitrate filters using air filtration devices. Fractionated samples of PM with an aerodynamic equivalent diameter of <10 microm were collected using an eight-stage Andersen impactor. Pb, Cd, Mn, Ni, Zn, V, As, Sb, Cu, Cr, Co, and Ce were determined by inductively coupled plasma sector field mass spectrometry, Pt and Rh were determined by adsorptive voltammetry, and Pd was determined by total reflection X-ray fluorescence analysis. The results show that the highest airborne heavy metal concentrations occurred at the main street with a large volume of traffic. With the exception of Co, V, Ce, and Mn, the heavy metals had an elevated enrichment factor compared to their concentrations in the continental crust. The main street site was especially contaminated with Sb, Zn, Cu, V, and Ni. Motor vehicles are the likely source of emissions. With the exception of Cr, Cu, and Zn, most of the airborne heavy metal concentrations determined for impactor samples deviate slightly from the results for total airborne dust. Heavy metal particle size distributions can be divided into three groups. For metals such as As, Cd, Pb, and V, the main fraction can be found in fine particles with a diameter of <2.1 microm, whereas Ce, Cr, Co, and Ni occur mainly in coarse particles with a diameter of >2.1 microm. Cu, Mn, Sb, Zn, Pt, Pd, and Rh occur in high concentrations in the medium range of the impactor stages (particle diameters of 1.1-4.7 microm). Metal concentrations in fine dust particles are needed to assess the human health risks of their inhalation.