A Novel Technology for Natural Gas Conversion by Means of Integrated Oxidative Coupling and Dry Reforming of Methane

A novel process concept for the oxidative coupling of methane followed by the oligomerization to liquids has been developed within the frame of the EU integrated project OCMOL. This technology is based on process intensification principles via cutting‐edge structured microreactor technology. It is also a fully integrated industrial process through the re‐use and the recycling of by‐products, in particular CO₂, at every process stage. The focus of this contribution is on the reaction engineering aspects of the core steps, i.e., catalysts, kinetics and reactor design for the methane coupling and reforming.     

Optical properties of γ-irradiated synthetic sapphire and yttria-stabilized zirconia spectroscopic windows

Synthetic sapphire and yttria-stabilized zirconia single-crystals were irradiated by increasing doses of γ-radiation to study the changes of their optical properties. The optical transparency of -Al₂O₃ was nearly constant up to the γ-radiation dose of 150 kGy for the spectral range of 400–1000 nm, while yellowish-brown coloration of (Zr_0.89Y_0.11)O_1.94 appeared for irradiation above 1 kGy. However, after a short-term heating in the temperature of 210^oC stable discoloration of zirconia can be achieved.     

Physical aging in polymers: Comparison of two ways of determining narayanaswamy's parameter

In this work, we have investigated by differential scanning calorimetry the enthalpy relaxation of two poly[methyl(α-n-alkyl)acrylates] in which it is possible to change the length of the two alkyl chains. In particular, we have evaluated the Narayanaswamy parameter, which controls relative contribution of temperature and of structure to the relaxation times, by two methods: Grenet's method (GM) and the peak-shift method (PSM). The data obtained show that both methods lead to equivalent results. Nevertheless, PSM requires fewer experiments than GM, and PSM appears to be more practical. The results obtained on the two acrylates show that the parameter x increases with the lateral chain length, that is to say, that the temperature effects increase as the length of the alkyl chain is increased.     

Infrared study of nitrogen monoxide adsorption on palladium ion-exchanged ZSM-5 catalysts

The adsorption of NO at room temperature on a H-ZSM-5 catalyst exchanged with Pd(NH₃) ₄ ²⁺ complex and activated in oxygen at 773 K has been examined by FTIR spectroscopy. After the oxidizing treatment, the Pd tetrammine complex decomposed into Pd(II) ions and/or Pd(II) hydroxyl complexes dispersed in the zeolite channels. The subsequent adsorption of NO at room temperature led to the reduction of Pd(II) to Pd(I) entities, resulting in the formation and adsorption of NO₂ on H-ZSM-5. The Pd(I) entities were shown to adsorb NO and form mononitrosyl complexes dispersed in the zeolite porosity and characterized by a single infrared absorption band at 1881 cm^–1. The Pd(I) mononitrosyl complex was shown to reversibly coordinate water and NO₂ molecules. The resulting nitrosyl complex was characterized by a single NO vibration band at 1836 cm^–1.     

The catalysis of the Ruff oxidative degradation of aldonic acids by titanium‐containing zeolites

Ti‐BEA and Ti‐FAU, obtained by post‐synthesis treatment, and TS‐1, obtained by direct hydrothermal synthesis, have been tested as catalysts for the Ruff oxidative degradation of calcium d‐gluconate to d‐arabinose using diluted hydrogen peroxide as oxidant. Only large‐pore zeolites Ti‐BEA and Ti‐FAU were found to be active. It was shown, in particular, that a very rapid leaching of titanium occurred and that the titanium species present in the solution were responsible for the catalytic activity observed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Double synchronized switch harvesting (DSSH): a new energy harvesting scheme for efficient energy extraction

This paper presents a new technique for optimized energy harvesting using piezoelectric microgenerators called double synchronized switch harvesting (DSSH). This technique consists of a nonlinear treatment of the output voltage of the piezoelectric element. It also integrates an intermediate switching stage that ensures an optimal harvested power whatever the load connected to the microgenerator. Theoretical developments are presented considering either constant vibration magnitude, constant driving force, or independent extraction. Then experimental measurements are carried out to validate the theoretical predictions. This technique exhibits a constant output power for a wide range of load connected to the microgenerator. In addition, the extracted power obtained using such a technique allows a gain up to 500% in terms of maximal power output compared with the standard energy harvesting method. It is also shown that such a technique allows a fine-tuning of the trade-off between vibration damping and energy harvesting.     

Simplified method for generating precise triangular waves

Kaplan and Tatrash have given a method for the design of triangular-wave generators. The practical implementation of this circuit requires use of analogue multipliers. The aim of this letter is to propose another method which does not need multipliers.     

Interdigitated humidity sensors for a portable clinical microsystem

This paper presents and compares two capacitive humidity sensors with interdigitated electrodes for a portable clinical application. A polyimide-sensitive layer covers the first structures and the optimized ones include a benzocyclobutene-sensitive layer and a heating resistor. Humidity measurements results are presented, in particular sensors response time in absorption, which are very small (inferior to 500 ms). Next, mechanisms of absorption and adsorption in a polymer layer are described and the two structures are compared. Suitability of optimized sensors for our application is discussed: new structures allow us to increase sensitivity and decrease response time. When the structure is maintained at 40 degrees C by its heater, the response time is 200 ms and the total desorption time is 11 s.     

Non-homogeneous extracellular resistivity affects the current-source density profiles of up-down state oscillations

Rhythmic local field potential (LFP) oscillations observed during deep sleep are the result of synchronized electrical activities of large neuronal ensembles, which consist of alternating periods of activity and silence, termed 'up' and 'down' states, respectively. Current-source density (CSD) analysis indicates that the up states of these slow oscillations are associated with current sources in superficial cortical layers and sinks in deep layers, while the down states display the opposite pattern of source-sink distribution. We show here that a network model of up and down states displays this CSD profile only if a frequency-filtering extracellular medium is assumed. When frequency filtering was modelled as inhomogeneous conductivity, this simple model had considerably more power in slow frequencies, resulting in significant differences in LFP and CSD profiles compared with the constant-resistivity model. These results suggest that the frequency-filtering properties of extracellular media may have important consequences for the interpretation of the results of CSD analysis.