Material Characterization of Ge1−x Sn x Alloys Grown by a Commercial CVD System for Optoelectronic Device Applications

High-quality compressive-strained Ge_1?x Sn _x /Ge films have been deposited on Si(001) substrate using a mainstream commercial chemical vapor deposition reactor. The growth temperature was kept below 450°C to be compatible with Si complementary metal–oxide–semiconductor processes. Germanium tin (Ge_1?x Sn _x ) layers were grown with different Sn composition ranging from 0.9% to 7%. Material characterizations, such as secondary-ion mass spectrometry, Rutherford backscattering spectrometry, and x-ray diffraction analysis, show stable Sn incorporation in the Ge lattice. Comparison of the Sn mole fractions obtained using these methods shows that the bowing factor of 0.166 nm (in Vegard’s law) is in close agreement with other experimental data. High-resolution transmission electron microscopy and atomic force microscopy results show that the films have started to relax through the formation of misfit and threading dislocations. Raman spectroscopy, ellipsometry, and photoluminescence (PL) techniques are used to study the structural and optical properties of the films. Room-temperature PL of the films shows that 7% Sn incorporation in the Ge lattice results in a decrease in the direct bandgap of Ge from 0.8 eV to 0.56 eV.     

Design considerations for concrete nuclear containment structures subjected to simultaneous pressure and seismic shear

Improvements in design code provisions for tangential shear in secondary concrete nuclear containment vessels are needed. This paper presents a brief summary of an experimental research program conducted at Cornell University on tangential shear. Six inch thick reinforced concrete panels were subjected to combined in-plane tension and shear as a behavioral model of a section of the wall of the containment under the combined loading of internal pressurization and seismic shear. Approximately 50 panels were tested. Parameters studied included: tension level and direction (biaxial or uniaxial), shear level and type (monotonic, cyclic, or a combined mode), sequence of applied loading, and reinforcing ratio and orientation.The results of the research indicate that current code provisions are overly conservative with regard to the amount of tangential shear to be carried by the orthogonally reinforced concrete. By increasing the allowable stress, the required amount of diagonal reinforcing would be reduced. This would result in savings in fabrication costs and construction time, and improved structural reliability through improved concrete placement. The research also indicates a need for a more exact consideration of containment displacements. Shear stiffnesses for the panels were extremely low, indicating that containment displacements may be larger than anticipated. The code provisions in this area are limited and unsubstantiated.     

Some aspects of cervical chordoma

This paper reviews 13 cases of chordoma in the cervical spine and base of the skull which have been seen at the Pack Medical Foundation over the past 25 years. Chordomas are dysonto genetic, malignant, slow-growing neoplasms that arise in remnants of the embryonic notochord. Concealed along the axial skeleton, these slow-growing tumors are usually well entrenched before they are accurately diagnosed. The majority of the chordomas of the spine occur in the sacroccygeal region. Of the 13 cases in the area of the cervical spine, 39% occurred in the region of the base of the skull and 61% in the area of the cervical spine. The treatment of the cervical tumors consisted of laminectomy to relieve the pressure on the cord and to remove as much of the neoplasm as possible. Some of the tumors at the base of the skull were nonresectable and were treated with radiotherapy. Radiotherapy was ultimately used in every case, either in combination with surgery or as a primary or subsequent method of management. The overall prognosis for palliation was fair but ineffective for cure.     

Nonlinear and nonplanar dynamics of suspended nanotube and nanowire resonators

Previous works on suspended carbon nanotube and nanowire resonators assume a priori that they oscillate in a single plane. We explore the nonlinear dynamics of such resonators and demonstrate that they can suddenly transition from a planar motion to a whirling, "jump rope" like motion. We identify nondimensional gate voltage, resonator geometry, quality factor, and flexural and axial elastic stiffnesses for which such motions can arise. The deliberate use of nonlinear and nonplanar motions opens up a variety of new modalities for this class of nanoelectromechanical systems that are not accessible in the linear operating regime.     

Partnering on Small Construction Projects

Application of partnering concepts on small construction projects by owners or government functionaries could result in substantial savings for private owners and public exchequers annually. This paper develops a concept for partnering for small construction projects based on recent management research and theories being developed in universities with the lessons learned from the U.S. Army Corps of Engineers experiences on partnering for large projects. The discussion addresses current attitudes toward partnering, particularly, in small (i.e., up to $3,000,000) private or government sponsored projects. An objective of this paper is to share the benefits of partnering on small construction projects, based on practices and experiences of the U.S. Army Corps of Engineers. A final objective is to develop a primer for construction practitioners.     

A 125-mm/sup 2/ 1-Gb NAND flash memory with 10-MByte/s program speed

A single 3-V only, 1-Gb NAND flash memory has been successfully developed. The chip has been fabricated using 0.13-/spl mu/m CMOS STI technology. The effective cell size including the select transistors is 0.077 /spl mu/m/sup 2/. To decrease the chip size, a new architecture is introduced. The in-series connected memory cells are increased from 16 to 32. Furthermore, as many as 16 k memory cells are connected to the same wordline. As a result, the chip size is decreased by 15%. A very small die size of 125 mm/sup 2/ and an excellent cell area efficiency of 70% are achieved. As for the performance, a very fast programming and serial read are realized. The highest program throughput ever of 10.6-MByte/s is realized: 1) by quadrupling the page size and 2) by newly introducing a write cache. In addition, the garbage collection is accelerated to 9.4-MByte/s. In addition, the write cache accelerates the serial read operation and a very fast 20-MByte/s read throughput is realized.     

Direct determination of dopamine D4 receptors in normal and schizophrenic postmortem brain tissue: a [3H]NGD-94-1 study

Normal speed videography was used to determine the angular parameters of 28 Spanish Thoroughbreds at trot. Horses were divided into 3 groups: Group UT, comprising 9 animals (provided by the VII National Stud, Cordoba, Spain) which had undergone no specific training programme and which were hand led at the trot; Group T, formed by 19 horses considered to be highly bred and trained, and which were also hand led; and Group RT, comprising the same horses as the latter group but this time trotted by a rider. Each animal was filmed 6 times from the right-hand side, using a Hi8 (25 Hz) video camera. Angular parameters for fore- and hindlimb joints were measured in each stride from computer-grabbed frames and entered into a spreadsheet for calculation; parameters included maximum and minimum angles, range of motion, and angles at landing, lift off and maximum hoof height; the times at which maximum angle, minimum angle, lift off and maximum hoof height occurred were calculated as percentages of total stride duration. Stride velocity (mean [s.d.]) was 4.01 (0.62), 3.60 (0.34) and 3.07 (0.36) m/s for Groups UT, T and RT, respectively. Data were then compared between Groups UT-T and Groups T-RT. Compared with Group UT, horses from Group T featured a shorter stance percentage (P<0.001) in both fore- and hindlimbs. The range of motion in forelimbs was smaller (P<0.05), due to lower retraction (P<0.001); moreover, maximum retraction appeared earlier (P<0.05). Greater scapular inclination was in evidence (P<0.05) and the shoulder joint extended further (P<0.05). Fore- and hind fetlock joints revealed a relatively shorter hyperextension period during the stance phase (P<0.01). Compared with Group T, horses from Group RT had a longer stance percentage, with belated maximum retraction of the fore- and hindlimbs. The range of movement in scapular inclination was greater (P<0.05), due to a smaller minimum angle (P<0.01), and the shoulder joint flexed more (P<0.05). The elbow joint extended more and for longer during the stance phase. Initial extension of the hip joint (P<0.05) and tarsus (P<0.001) lasted longer. The carpal and fore and hind fetlock joints recorded relatively longer hyperextension times, in addition to greater hyperextension during the stance phase. The results from the present study suggest that rider-effect must be taken in consideration when well gaited horses are selected for dressage purposes.     

Observations on Finger-like Crack Growth at a Urethane Acrylate/Glass Interface

Interfacial crack growth behavior along a urethane acrylate/glass interface is characterized by the development of finger-like perturbations along the advancing crack front. The finger-like perturbations grow from a slightly irregular crack front until they reach a steady-state where the velocity of the finger tips equals the velocity of the finger valleys. Once the fingers reached steady-state, the crack velocity was dependent on the applied strain energy release rate via a power law relationship where the exponent was independent of test humidity; however, the multiplicative constant A decreased by an order of magnitude from 80 to 15% RH. The spacing of the fingers was found to be independent of the crack's velocity and the relative humidity of the environment.