Bilayer graphene grown on 4H-SiC (0001) step-free mesas

We demonstrate the first successful growth of large-area (200 × 200 μm(2)) bilayer, Bernal stacked, epitaxial graphene (EG) on atomically flat, 4H-SiC (0001) step-free mesas (SFMs) . The use of SFMs for the growth of graphene resulted in the complete elimination of surface step-bunching typically found after EG growth on conventional nominally on-axis SiC (0001) substrates. As a result heights of EG surface features are reduced by at least a factor of 50 from the heights found on conventional substrates. Evaluation of the EG across the SFM using the Raman 2D mode indicates Bernal stacking with low and uniform compressive lattice strain of only 0.05%. The uniformity of this strain is significantly improved, which is about 13-fold decrease of strain found for EG grown on conventional nominally on-axis substrates. The magnitude of the strain approaches values for stress-free exfoliated graphene flakes. Hall transport measurements on large area bilayer samples taken as a function of temperature from 4.3 to 300 K revealed an n-type carrier mobility that increased from 1170 to 1730 cm(2) V(-1) s(-1), and a corresponding sheet carrier density that decreased from 5.0 × 10(12) cm(-2) to 3.26 × 10(12) cm(-2). The transport is believed to occur predominantly through the top EG layer with the bottom layer screening the top layer from the substrate. These results demonstrate that EG synthesized on large area, perfectly flat on-axis mesa surfaces can be used to produce Bernal-stacked bilayer EG having excellent uniformity and reduced strain and provides the perfect opportunity for significant advancement of epitaxial graphene electronics technology.     

The acute effects of the thermogenic supplement Meltdown on energy expenditure,fat oxidation,and hemodynamic responses in young,healthy males

The purpose of this study was to evaluate the effects of a thermogenic supplement, Meltdown, on energy expenditure, fat oxidation, and hemodynamics before and after maximal treadmill exercise. In a double-blind, randomized, placebo-controlled, cross-over design, 12 male participants underwent two testing sessions after consuming either the Meltdown or placebo supplement. While in a fasted state, participants rested for one hour, orally ingested either Meltdown or placebo and rested for another hour, performed a maximal treadmill exercise test, and then rested for another hour. Throughout the testing protocol, resting energy expenditure (REE) and respiratory exchange ratio (RER) were assessed. In addition, heart rate (HR) and blood pressure (BP) were assessed before and after exercise. Meltdown increased REE significantly more than placebo at 45 min (1.44 ± 0.25 vs. 1.28 ± 0.23 kcal/min; p = 0.003), 60 min (1.49 ± 0.28 vs. 1.30 ± 0.22 kcal/min; p = 0.025), and 120 min (1.51 ± 0.26 vs. 1.33 ± 0.27 kcals/min; p = 0.014) post-ingestion. Meltdown significantly decreased RER at 30 min (0.84 ± 0.03 vs. 0.91 ± 0.04; p = 0.022) and 45 min post-ingestion (0.82 ± 0.04 vs. 0.89 ± 0.05; p = 0.042), and immediately post-exercise (0.83 ± 0.05 vs. 0.90 ± 0.07; p = 0.009). Furthermore, over the course of the evaluation period, area under the curve assessment demonstrated that REE was significantly increased with Meltdown compared to placebo (992.5 ± 133.1 vs. 895.1 ± 296.1 kcals; p = 0.043), while RER was significantly less than placebo (5.55 ± 0.61 vs. 5.89 ± 0.44; p = 0.002) following ingestion. HR and BP were not significantly affected prior to exercise with either supplement (p > 0.05) and the exercise-induced increases for HR and BP decreased into recovery and were not different between supplements (p > 0.05). These data suggest that Meltdown enhances REE and fat oxidation more than placebo for several hours after ingestion in fully rested and post-exercise states without any adverse hemodynamic responses associated with maximal exercise.     

Estimation of dominance variance in purebred Yorkshire swine

We used 179,485 Yorkshire reproductive and 239,354 Yorkshire growth records to estimate additive and dominance variances by Method Fraktur R. Estimates were obtained for number born alive (NBA), 21-d litter weight (LWT), days to 104.5 kg (DAYS), and backfat at 104.5 kg (BF). The single-trait models for NBA and LWT included the fixed effects of contemporary group and regression on inbreeding percentage and the random effects mate within contemporary group, animal permanent environment, animal additive, and parental dominance. The single-trait models for DAYS and BF included the fixed effects of contemporary group, sex, and regression on inbreeding percentage and the random effects litter of birth, dam permanent environment, animal additive, and parental dominance. Final estimates were obtained from six samples for each trait. Regression coefficients for 10% inbreeding were found to be -.23 for NBA, -.52 kg for LWT, 2.1 d for DAYS, and 0 mm for BF. Estimates of additive and dominance variances expressed as a percentage of phenotypic variances were, respectively, 8.8 +/- .5 and 2.2 +/- .7 for NBA, 8.1 +/- 1.1 and 6.3 +/- .9 for LWT, 33.2 +/- .4 and 10.3 +/- 1.5 for DAYS, and 43.6 +/- .9 and 4.8 +/- .7 for BF. The ratio of dominance to additive variances ranged from .78 to .11.     

Relative aversiveness of signaled vs. unsignaled avoidable and escapable shock situations in humans.

Conducted 2 experiments dealing with signaled and unsignaled shock, using a total of 18 male college students. In Exp I 6 Ss avoided shock, and in Exp II 12 Ss escaped shock by pressing one button under an unsignaled shock condition. By pressing on a separate button, Ss could change to signaled avoidance (Exp I) or signaled escape (Exp II). All Ss changed from the unsignaled to signaled condition whether shock was avoidable or escapable. 6 Ss were also given a chance to change from signaled to unsignaled escapable shock. Changeover responding remained at or near operant levels for these Ss. Comparing results of this study with studies using the rat revealed much similarity but some differences. Differences depended upon whether an escapable or avoidable procedure was used. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Microchip flow cytometry using electrokinetic focusing

Flow cytometry of fluorescently labeled and unlabeled latex particles is demonstrated on a microfabricated device. The latex particles were detected and counted using laser light scattering and fluorescence coincidence measurements. Sample confinement was accomplished using electrokinetic focusing at a cross intersection, and detection occurred 50 μm downstream from the intersection. Particles with diameters of 1 and 2 μm were analyzed and distinguished from each other based on their light scattering intensity and fluorescence. A maximum sample throughput of 34 particles/s was achieved. Sample mixtures with varying proportions of fluorescently labeled and unlabeled particles were also analyzed and found to be within experimental error of the expected ratios.     

Engineering graphene mechanical systems

We report a method to introduce direct bonding between graphene platelets that enables the transformation of a multilayer chemically modified graphene (CMG) film from a "paper mache-like" structure into a stiff, high strength material. On the basis of chemical/defect manipulation and recrystallization, this technique allows wide-range engineering of mechanical properties (stiffness, strength, density, and built-in stress) in ultrathin CMG films. A dramatic increase in the Young's modulus (up to 800 GPa) and enhanced strength (sustainable stress ≥1 GPa) due to cross-linking, in combination with high tensile stress, produced high-performance (quality factor of 31?000 at room temperature) radio frequency nanomechanical resonators. The ability to fine-tune intraplatelet mechanical properties through chemical modification and to locally activate direct carbon-carbon bonding within carbon-based nanomaterials will transform these systems into true "materials-by-design" for nanomechanics.     

Central cloudy corneal dystrophy of Francois. A clinicopathologic study

Central cloudy corneal dystrophy of Francois was first described in 1955 by J. Francois; its pathophysiology remains unknown. An 80-year-old woman with bilateral central cloudy corneal dystrophy of Francois was examined after having undergone a combined penetrating keratoplasty and cataract extraction. The corneal button was obtained. Light microscopy revealed stromal staining for acid mucopolysaccharide. Transmission electron microscopy revealed extracellular vacuoles, some of which had fibrillogranular material and electron-dense deposits. Fibrillogranular material was present in and around some keratocytes. Numerous endothelial vacuoles contained light-staining fibrillogranular material and round electron-dense granules. Our findings suggest that the opacities in patients with central cloudy corneal dystrophy of Francois are due to the extracellular accumulation of mucopolysaccharide and lipidlike material. Further studies are needed to elucidate the nature of these deposits.